Elecom HCS-FS02 Handleiding

Bekijk gratis de handleiding van Elecom HCS-FS02 (6 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.7 sterren uit 2 reviews. Heb je een vraag over Elecom HCS-FS02 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

•

•

•

•

•

*

▷◁



Press either or button to select the region number.

Body composition analyser

Manual

HCS-FS02 series

For use in Hong Kong, Singapore

and the Philippines only.

Precautions

DANGERWARNING

Never use this product with the

following medical electronic devices.

Never judge the measurement results yourself (or do such things as

evaluate measurements or base an exercise plan on this).

Weight loss and therapeutic exercise based on self-judgment may

be bad for your health. Always follow the instructions of a certified

professional.

Do not step on the edge of the analyser, jump on the analyser, or

jump up and down on the analyser. Doing so may cause you to fall

or slip, resulting in serious injury.

Do not use the analyser on a slippery surface, such as a tile surface

or wet floor. Doing so may cause you to fall or slip, resulting in

serious injury. Furthermore, water may get inside the analyser and

cause a breakdown.

Never modify, disassemble, or repair the analyser. This may cause

an unexpected accident or other trouble.

Do not mix different types of batteries together or old batteries with

fresh ones. Doing so may cause battery leakage and failure.

(1) Pacemakers and other implantable

medical electronic devices

(2) Heart-lung machines and other

artificial life-support medical

electronic devices

(3) Electrocardiographs and other

wearable medical electronic devices

This analyser passes a weak electric

current through the body and may

cause the above-mentioned devices

to malfunction, resulting in an

accident or serious injury.

•

•

•

•

•

•

Setting the region number

Specification

* Please note that all the specifications for the settings information, except 'weight', are presumptions calculated with weight

or resistance value. BMI is the calculated value.

Maximum weight measurementapproximately 150 kg

2.5 to 100 kg：50 g over 100 kg：100 g

2.5 to 75 kg：± 100 g 75 to 100 kg：± 150 g 100 to 150 kg：± 300 g

weight comparison

-9.9 to 9.9 kg: 100 g *compares to the previous weight

0.1

0.1%

9 levels

9 levels

1 to 30

6 levels

0.1kg

500 to 3000kcal/day: 1kcal

5 regions

2017/1/1 to 2050/12/31

0：00 to 23：59（24-hour notation）

4 people

1900/1/1 to 2040/12/31

Male/ Female

100.0 to 250.0cm：0.5cm

5 to 75%：0.1%

BMI

body fat percentage

body fat percentage standards

skeletal muscle percentage

skeletal muscle percentage standards

visceral fat level

visceral fat level standards

bone quantity

basal metabolism

area/region

dates

time

user registration

date of birth

sex

heights

DC4.5V / dry cell AAA battery × 3

0 to 40°C0 to 90％ RH

approximately 1.0 kg（excluding batteries）

approximately W270 × D230 × H23 mm

AAA battery（R03）× 3

Weight capacity

Weight increments

Scale unit of measurement

Settings

Power consumption

Operating temperature and humidity ranges

Weight

Dimensions

Sample batteries

Your geographical location, longitude and latitude, affects your gravity, so you need to select the

appropriate region number to get an accurate measurement.

Because this product is designed for use in Japan, specific regions are not available for every

country. This can affect your measurements by up to 100g either way. Please select region no.5 for

Hong Kong, Singapore and the Philippines(Manila).

Hold down the (power) button untill the '地域' (region) number flashes.

When you first turn on the analyser or after changing the batteries,

press the (power) button to display the region setting mode.

To change the region number, hold down the (power) button that

turns the analyser on.

地

域

Press the (setting) button. The region number will be set.

Part names

Displaypanel

Electrodes

Electrodes

Battery cover

Operation section

Battery exchange display

(Switches on when the battery must be replaced.)

Operationconfirmation display

(Switches onif an operationbutton is pressed.)

Display

section

Level display (Displays the evaluation result.)

(Low)(Normal)(High)

Power button

(Press to switch the power on or off. The power

also switches on when you step on the analyser.

In such cases, the user number is recognized

automatically.)

(Press and hold to change quickly.)

(Press and hold to

change quickly.)

(Press when measuring only your

weight, or the weight of a baby or pet.)

(Press to register, edit, or check users. Press to enter settings during

configuration. Press and hold to return to the previous setting.)

Left button(Back)

Weight mode button

Right button(forward)

Enter button

Using the analyser

Inserting the batteries

On the rear surface of the analyser, push

the battery cover in the direction of the

arrow, and then remove it.

Place the analyser on a hard flat surface, such as a wooden floor.

Do not place the analyser on any of the following surfaces. Doing so may cause errors in the

measurement values.

Insert the 3 included size AAA batteries

after checking the polarity ( / ). The

side with the spring is the negative ( )

side.

Attach the battery cover.

Placingtheanalyser

Sloped floor

Soft surface, such as a rug

Measures only your weight. For the measurement method, see the next page.

Measuring the weightofa baby or pet

Measuring onlyyour weight

Displays the difference in weight between the 1st and 2nd measurements to measure the

weight of a baby or pet. For the measurement method, see the next page.

The following 3 methods can be used to measure with this analyser.

Measuring body composition

Measure after automatic recognition of the user

The power is switched on and measurement is started by simply stepping on the analyser.

In addition, the user is recognized automatically from the registered users, and the measurement

results are recorded. (Limited to when the user number has been specified and measurement

has been performed at least once in the past.)

Step on while the power is offMeasuringUser number is displayed

Measure after specifying the user number

Measure using Guest mode

Specify the number of a registered user, and then measure. The user is matched reliably with

their registered data (more so than with automatic user recognition), and then the measurement

results are displayed. For the user registration and measurement methods, see the next page.

An unregistered user can be measured. The measurement values cannot be recorded. For the

measurement method, see the next page.

The analyser was stored standing up

The analyser was picked up and moved

The automatic 0.00 kg calibration and

correction function

When the measurement values are obviously incorrect, performthe following procedure, and then measure again.

Press the Enter button (

).

体重

Make sure that “0.00kg” is

displayed.

Press the Powerbutton ( )

to switch off the power.

Place the analyser on a hard flat

surface.

Make sure that “ ” is displayed.

Do not place anything on theanalys

er

or applyweight to the analyser while

“ ” is displayed.

The power is switched on and measurement is started by

simply stepping on the analyser. Accordingly, the analyser is

calibrated automatically to 0.00 kg periodically while the power

is switched off. However, calibration may not be performed

correctly in the situations listed below. Before using the

analyser for measurement, always place the analyser on a

hard surface with nothing on top of the analyser, and then

pres

s either the Power button ( ) or Enter button (

).

The analyser was stored with something on top of the

analyser

Presseither the Power button ( )

orEnter button ( ).

Product specificaties