Elac S10.2 Handleiding

Elac Subwoofer S10.2

Lees hieronder de 📖 handleiding in het Nederlandse voor Elac S10.2 (29 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/29

S10.2 Powered Subwoofer OPERATING INSTRUCTIONS

ELAC S10.2 POWERED SUBWOOFER

ELAC S10.2 Subwoofer | www.elac.com | Page 1

Safety Instructions

1. General information

• Please read and follow these safety instructions.

• Keep them safe for future reference.

• Observe all warnings on the speaker and in the manual. Please check the speaker for damage before

use. The speaker must be in perfect working condition. Damaged parts may lead to personal injury.

• CAUTION! Subwoofers and active speakers may be heavy. Be careful when lifting them to prevent

personal injury.

2. Use only as directed

• Connect the speaker(s) according to the instructions in the manual.

• Many ELAC speakers are equipped with spikes and/or anti-slip feet. They are explicitly provided for

levelling the speaker. For levelling on an uneven ﬂoor, unscrew the spikes or anti-slip feet by 2-3 turns of

thread. The speaker should always be in perfect vertical alignment: the stability of the speaker must not

be compromised by using spikes or anti-slip feet as the speaker may tip-over.

3. Location

• Install the speakers on a level surface only

• When choosing the location of these speakers do not place them in locations that are:

• In direct sunlight

• Very humid

• Prone to vibrations

• Exceptionally hot or cold

• Near CRT Televisions (the speakers are not magnetically shielded and may cause color issues

with a CRT based TV)

• Close to magnetic cards (Since the speakers are not magnetically shielded placing magnetic

cards such as credit cards or commuter cards may cause them to fail).

WARNING! Please ensure the product is perfectly stable to avoid injury from tip-over. Please note, that stability

can be increased by using spikes on carpeted surfaces. However, the mounting of spikes must be carried out

carefully due to their very sharp ends which may cause injuries. The stability on slippery ﬂoors can be increased

by using Velcro fastening tape or double-sided adhesive tape. Do not install the speaker near any heat

sources such as radiators, heating valves, stoves, or other apparatus (including ampliﬁers) that produce heat, or

in areas where there is a risk of explosion.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install the speaker in a closed rack or in a closed cupboard.

• Do not put burning candles on or near the speaker.

• Do not install the speaker near transformers because electromagnetic stray ﬁelds can cause hum noise

on woofers.

• In combination with certain materials / lacquers / material surfaces, anti-slip feet or spike washers may

cause colored imprints on the surfaces.

ELAC S10.2 Subwoofer | www.elac.com | Page 2

4. Overload

• Extreme overload of the device due to very high volume may cause damage to individual components.

Because of the possible danger, you should never leave loudspeakers under extreme overload

conditions unattended.

5. Service

• DANGER! Do not open the cabinet because of potentially hazardous voltages exist inside! Servicing to

be carried out by qualiﬁed service personnel only.

• Servicing is required when the loudspeaker has been damaged in any way, such as damage to

the power supply cord or the plug, or when liquid has been spilled or objects have fallen into the

loudspeaker, the speaker has been exposed to rain or moisture, does not operate normally, or has been

dropped. To reduce the risk of electric shock, do not open the loudspeaker. Servicing to be carried out

by qualiﬁed service personnel only.

6. Fuse links

• Various faults in subwoofers or active speakers may cause the fuse to blow. If the fuse blows, only

replace it with the correct fuse type and rating as shown on the rear of the loudspeaker on the fuse

holder.

7. Cleaning

• NOTE: Clean only with soft, smooth cloth or with dust brush. Do not use scouring agents, alcohol,

benzene, furniture polish or other agents for cleaning! Modern furniture is often coated with multiple

varnishes and plastics which can be treated with chemical agents. Some of these agents contain

substances which degrade or soften the rubber feet. Therefore we advise you to place an anti-slip mat

underneath the loudspeaker.

8. Volume

• CAUTION! Continuous high volume may cause severe damage to your hearing. Please listen responsibly.

9. Disposal

• The packaging is made from recyclable materials. Dispose of this in an environmentally friendly manner.

At end of life do not dispose the speaker with the standard household waste. The speaker must be

recycled in accordance with local legislation. Ask your local government for further information on

recycling as the device contains valuable raw materials. Disable the speaker before disposal.

10. Power

• This subwoofer is only intended to be connected to voltages that are listed on the rear panel of the

cabinet. Connection to any other voltage may cause irreversible damage to the subwoofer and will void

the warranty. Use of plug adapters is not recommended because they may allow connection to voltages

other than those printed on the back of this subwoofer.

Product specificaties

Merk:	Elac
Categorie:	Subwoofer
Model:	S10.2
Kleur van het product:	Grijs
Type stroombron:	AC
Meegeleverde kabels:	AC
Land van herkomst:	China
Stroomverbruik (in standby):	0.5 W
Materiaal:	MDF
Gemiddeld vermogen subwoofer:	100 W
Diameter driver subwoofer (imperiaal):	10 "
Frequentiebereik subwoofer:	35 - 150 Hz
Breedte van de subwoofer:	343 mm
Hoogte van de subwoofer:	343 mm
Diepte van de subwoofer:	343 mm
Gewicht subwoofer:	13000 g
Aantal subwoofers:	1
AC-ingangsspanning:	100-240 V
AC-ingangsfrequentie:	50/60 Hz
Diameter driver subwoofer:	254 mm
Subwoofer maximale vermogen:	200 W
Line inputs (RCA):	1
Low pass filter:	Ja
Crossover subwoofer frequenties:	50 - 150 Hz