Elac Alchemy DPA-2 Handleiding

Elac Receiver Alchemy DPA-2

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Elac Alchemy DPA-2 (14 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
DPA-2 STEREO/MONO AMPLIFIER OPERATING INSTRUCTIONS
Alchemyā„¢
ELAC Alchemy DPA-2 Ampliļ¬er | www.elac.com | Page 1
Safety Instructions
1. General information
ā€¢ Please read and follow these safety instructions.
ā€¢ Keep them safe for future reference.
ā€¢ Observe all warnings on the ampliļ¬er and in the manual. Please check the ampliļ¬er for damage before
use. The ampliļ¬er must be in perfect working condition. Damaged parts may lead to personal injury.
2. Use only as directed
ā€¢ Connect the ampliļ¬er according to the instructions in the manual.
3. Location
ā€¢ Install the ampliļ¬er on a level surface only
ā€¢ When choosing the location of the ampliļ¬er do not place it in locations that are:
ā€¢ In direct sunlight
ā€¢ Very humid
ā€¢ Prone to vibrations
ā€¢ Exceptionally hot or cold
WARNING! Please ensure the product is perfectly stable to avoid injury from tip-over. Do not install the ampliļ¬er
near any heat sources such as radiators, heating valves, stoves, or other apparatus that produce heat, or in
areas where there is a risk of explosion.
ā€¢ Do not block any ventilation openings. Install in accordance with the instructions.
ā€¢ Do not install the ampliļ¬er in a closed rack or in a closed cupboard.
ā€¢ Do not put burning candles on or near the ampliļ¬er.
ā€¢ Do not install the ampliļ¬er near transformers because electromagnetic stray ļ¬elds can cause hum.
ā€¢ In combination with certain materials / lacquers / material surfaces, anti-slip feet may cause colored
imprints on the surfaces.
4. Overload
ā€¢ Extreme overload of the device due to very high volume may cause damage to individual components.
Because of the possible danger, you should never leave the ampliļ¬er under extreme overload conditions
unattended.
ELAC Alchemy DPA-2 Ampliļ¬er | www.elac.com | Page 2
5. Service
DANGER! Do not open the ampliļ¬er because there may be dangerous voltages inside. Servicing to be carried
out by qualiļ¬ed service personnel only.
Servicing is required when the ampliļ¬er has been damaged in any way, such as damage to the power supply
cord or the plug, or when liquid has been spilled or objects have fallen onto the ampliļ¬er, the ampliļ¬er has been
exposed to rain or moisture, does not operate normally, or has been dropped. To reduce the risk of electric
shock, do not open the ampliļ¬er. Servicing should be carried out by qualiļ¬ed service personnel only.
6. Cleaning
NOTE: Clean only with soft, smooth cloth or with dust brush. Do not use scouring agents, alcohol, benzene,
furniture polish or other agents for cleaning! Modern furniture is often coated with multiple varnishes and
plastics which can be treated with chemical agents. Some of these agents contain substances which degrade or
soften the rubber feet. Therefore we advise that you place an anti-slip mat underneath the ampliļ¬er.
7. Volume
CAUTION! Continuous high volume may cause severe damage to your hearing. Please listen responsibly.
8. Disposal
ā€¢ The packaging is made from recyclable materials. Dispose of this in an environmentally friendly manner.
At end of life dispose of the ampliļ¬er as e-waste. The ampliļ¬er must be recycled in accordance with
local legislation. Ask your local government for further information on recycling as the device contains
valuable raw materials.


Product specificaties

Merk: Elac
Categorie: Receiver
Model: Alchemy DPA-2

Heb je hulp nodig?

Als je hulp nodig hebt met Elac Alchemy DPA-2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Elac

Handleiding Receiver

Nieuwste handleidingen voor Receiver