Ei Electronics Ei414RF Handleiding

Ei Electronics Niet gecategoriseerd Ei414RF

Lees hieronder de 📖 handleiding in het Nederlandse voor Ei Electronics Ei414RF (32 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 139 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32

Instruction Manual

Read and etain carefully for as long as the product is being used. It contains vital information on the operation and installation of your r

Fire / CO Alarm Interface. The booklet should be regar oduct.ded as part of the pr

If you are just installing the unit, the booklet must be given to the householder. The booklet is to be given to any subsequent user.

Model: Ei414

Fire / CO Alarm Interface

Contents

1. Introduction & Connection Diagrams ........................................................................................

2. Typical Installation Examples ..........................................................................................................

3. Installation ............................................................................................................................................

4. House Coding .......................................................................................................................................

5. Testing ....................................................................................................................................................

6. Service Relay ........................................................................................................................................

7. User Information ................................................................................................................................

8. Troubleshooting the RadioLINK .....................................................................................................

9. Technical Specification .....................................................................................................................

10. Service & Guarantee .........................................................................................................................

11. Contact Us ............................................................................................................................................

Page

1. Introduction

The Ei414 Fire / CO Alarm Interface can be used to connect Ei Electronics RadioLINK Alarm Systems to

suitable other Systems such as Fire Panels, Telecare Systems, Auto Diallers, Security Systems etc. The Ei414

has 3 output relays for Fire, CO & Service that can be triggered by an Ei Electronics RF Alarm System. These relays

can be directly connected to the other Systems or alternatively can be used to trigger one of the other Systems

RF transmitters. A RadioLINK system consists of Ei Electronics RadioLINK Smoke, Heat and CO Alarms along with

RadioLINK accessory devices that are interconnected using the Ei Electronics proprietary RF protocol system. The

Ei414 must be House Coded to the other RadioLINK devices in the system.

se rvice

ON TEST

OFF

Fi / CO Alarm Int erfacere

Alarm Code LED’s

RadioLink LED Power LED

Key Switch

Off

Test

open screws

then insert screwdriver into the notch to remove cover

How to remove Cover

Fi / CO Alarm Interfacere

Product specificaties

Merk:	Ei Electronics
Categorie:	Niet gecategoriseerd
Model:	Ei414RF
Gewicht:	375 g
Breedte:	190 mm
Diepte:	90 mm
Hoogte:	37 mm
Gewicht verpakking:	425 g
LED-indicatoren:	Ja
Type stroombron:	AC
Ingangsspanning:	230 V
Temperatuur bij opslag:	0 - 35 °C
Bedrijfstemperatuur (T-T):	0 - 40 °C
RF Zendbereik:	100 m
RF-zendfrequentie:	868.499 MHz