Edimax ET-912+ Series Handleiding

Bekijk gratis de handleiding van Edimax ET-912+ Series (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.9 sterren uit 4 reviews. Heb je een vraag over Edimax ET-912+ Series of wil je andere gebruikers van dit product iets vragen? Stel een vraag

ET-912+ Series

100Base 10/100BaseTX To 100Base-FX

Media Converter

Best media conversion solutions for network connectivity

Edimax’s full series of Media Converter are designed to meet the needs for massive optical fiber network,

provide the whole Ethernet / Fast Ethernet network implementation.

Migrating between copper and ber-based Medium

ET-912+ series convert the signals between two dierent transmission medium, allowing user a simple and

cost-eective method to migrate between UTP cable and ber optic cable. It can transmit signals up to 2km

(multimode) and 30/40/60/80/100km (single-mode) in ber medium, allowing users to extend network.

Comply with IEEE Standards

ET-912+ series are fully compliant with IEEE 802.3 10Base-T and 802.3u 100Base-TX, 100Base-FX standards.

The device comes with one RJ-45 port to connect to a 10/100Base-TX device such as workstation or switch

and one ber connection to connect a 100Base-FX device.

Built in Switching ASIC

ET-912+ series have turned the function more like a 2 ports switch than a traditional converter. User can get all

switching benets such as frames checking and ltering.

Feature LED and Fiber link alarm

User could monitor the device through Feature LED. In addition, Fiber Link Alarm could allow user to monitor

and maintain their critical ber link more eectively.

Unique voltage supervisor

Built in voltage supervisor IC will automatically reset all chipsets in converter as power voltage drop below 2.9V,

this action can make sure ber port and TP port work normally when thunder storm or power unstable occuring

cause the power

electricity suddenly down in an instant time.

Plug-and-Play Installation

Simply to plug the TP and ber port to the device having the media convertibility.

Features

•Compliant with IEEE 802.3 10BaseT and IEEE 802.3u 100BaseTX/100BaseFX Standards

•One 10/100BaseTX Ethernet TP Port and One 100BaseFX Ethernet Fiber Port

•One 100BaseFX Fiber Port can support either Multi (SC/ST) or Single (SC, LC, MT-RJ) Mode

•TP Port can support Half/Full-Duplex, Auto-MDI/MDI-X and Auto-Negotiation

•Providing a slide switch for Full-and Half-Duplex selection on FX Port

•Multiple Fiber Connectors

•Providing 19” Converter Chassis for up to 16 slots with redundant power supply for optional expansion use

Product specificaties