Edifier M20 Handleiding

Edifier Speaker M20

Lees hieronder de 📖 handleiding in het Nederlandse voor Edifier M20 (7 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7

LEARN MORE

M20™ and M50™

TAKE A GOOD LOOK

Your headset may look

slightly different than the

illustration, but will still

work as described.

MICRO USB CHARGING PORT

• Use with the AC wall charger:

1 hour before ﬁrst use

2 hours (100% charge)

• Do not use headset while charging

VOLUME BUTTONS

• Volume presets (1 tap per level change)

LED

• Charging (solid red)

• Low battery (3 red ﬂashes at powering on)

• Pairing mode (repeating red/blue ﬂashes)

CALL BUTTON

• Take a call or end it (1 tap)

• Redial (2 taps)

• Initiate phone’s voice-dialing

(2-second press until tone is heard)

• Reconnect lost Bluetooth connection

(1 tap if the headset doesn’t automatically

reconnect)

• Activate pairing mode after initial set up

(press until red/blue LED ﬂashes)

• Activate multipoint (2-second press

while switching on power)

POWER SWITCH

• On (slide to reveal black)

• Off (slide to reveal red)

PLT_M50

CONNECT TO YOUR PHONE

“Pairing” is the set-up process of

introducing your headset to your

phone. Before using your headset

for the ﬁrst time, you must pair it

with your Bluetooth-enabled phone.

“Multipoint” lets you pair this

headset with two phones so you

can answer a call from either phone.

You must activate multipoint before

pairing second phone.

1. READY

First Time, Right Out of the Box:

Turn on the headset. The LED

ﬂashes red/blue to indicate

pairing mode.

Activate Multipoint (for 2nd phone):

While pressing Call button, turn

on the headset and continue

pressing Call button until LED

ﬂashes blue twice. Repeat to turn

off multipoint.

Pair New or Second Phone:

Turn on headset. Press Call

button until the LED ﬂashes red/

blue.

2. SET

Activate the Bluetooth feature

on your phone, then get phone

to add / search / discover new

Bluetooth devices.

Phones Have Different Menus to

Select from, for example:

iPhone: Settings > General >

Bluetooth > On (starts the search

for devices)

BlackBerry® smartphone:

Settings/options > Bluetooth: On >

Search for devices

Android™:

Settings > Wireless & Networks >

Bluetooth: On > Scan for devices

3. CONNECT

Select “PLT_M20” or “PLT_M50” from

the list of Bluetooth devices shown

on your phone.

If phone asks for a passcode, enter

four zeros (0000). You may see ****

on screen.

Some phones also ask to conﬁrm

headset connection after pairing.

Headset LED will stop ﬂashing red/

blue once successfully paired/

connected.

You can now make a call using your

phone’s keypad or voice-dialing

feature.

Product specificaties

Merk:	Edifier
Categorie:	Speaker
Model:	M20
Kleur van het product:	Wit
Gewicht:	1300 g
Breedte:	663 mm
Diepte:	147 mm
Hoogte:	156 mm
Connectiviteitstechnologie:	Bedraad
Type stroombron:	AC
Meegeleverde kabels:	USB
Aantal USB 2.0-poorten:	4
Microfoon, line-in ingang:	Ja
Gemiddeld vermogen:	10 W
Volumeregeling:	Digitaal
Ingang stroom:	Ja
Equalizer-instellingen:	Nee
Aanbevolen gebruik:	PC
Impedantie:	10000 Ohm
Audio-uitgangskanalen:	2.0 kanalen
Speaker plaatsing:	Tafelblad/Boekenplank
Aantal drivers:	2
Woofer:	Nee
Diameter driver subwoofer (imperiaal):	2 "
Frequentiebereik:	- Hz
Signaal/ruis-verhouding:	90 dB
Totale harmonische vervorming (THD):	10 procent
Versterker:	Ingebouwd
Tweeter:	Nee
Audio RCA-ingangen:	1
Versterker/ontvanger ingang interface type:	3.5 mm jack,RCA