Edgewater EdgeMarc 4562T4W Handleiding

Edgewater Router EdgeMarc 4562T4W

Bekijk gratis de handleiding van Edgewater EdgeMarc 4562T4W (7 pagina’s), behorend tot de categorie Router. Deze gids werd als nuttig beoordeeld door 36 mensen en kreeg gemiddeld 4.7 sterren uit 18.5 reviews. Heb je een vraag over Edgewater EdgeMarc 4562T4W of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/7
4562 Converged
Networking Router
Quick Start Guide
Version 1.0
Page 1 of 7
200-4562-001
Before You Start
Please read this guide thoroughly as it describes the basic installation of
the device. Additional configuration needed to deploy the device in a
specific environment can be performed with the help of online help.
This guide also provides an example of a typical 4562 deployment that
can be used as a guideline for your installation.
Requirements for Installation
A computer with a web browser such as Microsoft Internet Explorer or
Netscape Navigator or any other browser of your choice
At least one Ethernet cable
Following information supplied by the VoIP Service Provider
o IP address of the WAN interface
o if T1 is being used for WAN connection then:
T1 frame format
Layer 2 protocol such as PPP, Frame Relay/DLCIs, HDLC,
etc.
o IP address of the Softswitch
Page 2 of 7
Instructions
Step 1 Connecting the Cables
1. Connect one end of an Ethernet cable to local LAN port 4 of 4562. This port can be seen
in the area “B” of the above diagram. Connect the other end of the cable to your
computer’s Ethernet port.
2. If T1 is used for the WAN connectivity then perform the following steps, otherwise go to
step 5.
Page 3 of 7


Product specificaties

Merk: Edgewater
Categorie: Router
Model: EdgeMarc 4562T4W

Heb je hulp nodig?

Als je hulp nodig hebt met Edgewater EdgeMarc 4562T4W stel dan hieronder een vraag en andere gebruikers zullen je antwoorden