Edelkrone FlexTILT Head PRO Handleiding

Bekijk gratis de handleiding van Edelkrone FlexTILT Head PRO (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.4 sterren uit 7 reviews. Heb je een vraag over Edelkrone FlexTILT Head PRO of wil je andere gebruikers van dit product iets vragen? Stel een vraag

TABLE OF CONTENTS

WHAT’S IN THE BOX & THE BASICS

ATTACHING THE 3/8”-16 MOUNTING WHEEL

MOUNTING YOUR FLEXTILT HEAD PRO

MOUNTING THE CAMERA TO YOUR FLEXTILT HEAD PRO

THE ADJUSTMENT/LOCKING KNOBS

ADJUSTING THE TENSION OF YOUR FLEXTILT HEAD PRO

CAUTIONS AND TIPS

USE WITHOUT A TRIPOD

1.

2.

3.

4.

5.

6.

7.

8.

Before operating your edelkrone,

please watch the user’s manual video from the link below

http://edel.kr/fthp

USER’S MANUAL

1. WHAT’S IN THE BOX & THE BASICS

1.

2.

3.

4.

5.

1/4” - 20 mounting screw

Level adjustment knobs (x2)

3/8” - 16 mounting screw

Reducer bushing/adapter*

Mounting wheel changing piece

6.

7.

8.

9.

10.

3mm adjustment joints (x2)

Spirit level

Pan marking

3mm allen wrench

3/8” - 16 mounting port

3. MOUNTING YOUR FLEXTILT HEAD PRO

1.

2.

3.

Place your FlexTILT Head PRO on the screw.

Rotate clockwise to tighten.

Continue rotating until it is tightened.

A detailed video explaining the mounting process can be found at:

http://edel.kr/fthp

1

1

2

5

6

7

8

9

10

2

A detailed video explaining the mounting process can be found at:

http://edel.kr/fthp

1.2.

4. MOUNTING THE CAMERA TO YOUR FLEXTILT HEAD PRO

When adjusting the height, adjust one point at a time. (a,b)

Unfold the FlexTILT Head PRO to

access the mounting wheel.

Attach your camera using

the mounting wheel.

a

b

1

2

FLEXTILT HEAD PRO

A detailed video explaining how to chage the mounting screws can be found at:

http://edel.kr/fthp

2. ATTACHING THE 3/8”-16 MOUNTING WHEEL

*1/4”-20 to 3/8”-16 mounting screw adapter and 1/4”-20 reducer bushing for mounting

port are provided. The adapter is mounted on the 3/8"-16 port at the bottom, which

can be removed it with the help of a coin.

4

3

FlexTILT Head PRO has two mounting screw options: 1/4”-20 & 3/8”-16.

Remove the indicated part with a screw driver.

Remove the 1/4”-20 mounting screw.

Attach the 3/8”-16 mounting screw.

Attach the part back in its place.

1.

2.

3.

4.

Product specificaties