ECS L7S7A Handleiding
ECS
Moederbord
L7S7A
Lees hieronder de 📖 handleiding in het Nederlandse voor ECS L7S7A (74 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/74
Preface
Copyright
This publication, including all photographs, illustrations and software, is protected un-
der international copyright laws, with all rights reserved. Neither this manual, nor any
of the material contained herein, may be reproduced without written consent of the au-
thor.
Version 1.0
Disclaimer
The information in this document is subject to change without notice. The manufac-
turer makes no representations or warranties with respect to the contents hereof and
specifically disclaims any implied warranties of merchantability or fitness for any par-
ticular purpose. The manufacturer reserves the right to revise this publication and to
make changes from time to time in the content hereof without obligation of the manu-
facturer to notify any person of such revision or changes.
Trademark Recognition
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corp.
MMX, Pentium, Pentium-II, Pentium-III, Celeron are registered trademarks of Intel
Corporation.
Other product names used in this manual are the properties of their respective owners
and are acknowledged.
Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digi-
tal device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not oc-
cur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
− Reorient or relocate the receiving antenna.
− Increase the separation between the equipment and the receiver.
− Connect the equipment onto an outlet on a circuit different from that to which
the receiver is connected.
− Consult the dealer or an experienced radio/TV technician for help.
Shielded interconnect cables and a shielded AC power cable must be employed with
this equipment to ensure compliance with the pertinent RF emission limits governing
this device. Changes or modifications not expressly approved by the system's manu-
facturer could void the user's authority to operate the equipment.
ii
Declaration of Conformity
This device complies with part 15 of the FCC rules. Operation is subject to the follow-
ing conditions:
− This device may not cause harmful interference, and
− This device must accept any interference received, including interference
that may cause undesired operation.
Canadian Department of Communications
This class B digital apparatus meets all requirements of the Canadian Interference-
causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement
sur le matériel brouilieur du Canada.
About the Manual
The manual consists of the following:
Chapter 1
Introducing the Mainboard
Describes features of the mainboard,
and provides a shipping checklist.
Go to ⇒ page 1
Chapter 2
Installing the Mainboard
Describes installation of mainboard
components.
Go to ⇒ page 8
Chapter 3
Using BIOS
Provides information on using the BIOS
Setup Utility.
Go to ⇒ page 28
Chapter 4
Using the Mainboard Software
Describes the mainboard software.
Go to ⇒ page 43
iii
Features and Packing List Translations
Liste de contrôle
Comparez ce qui est contenu dans l'emballage de la carte mère avec la liste
suivante:
Eléments standards
• Une carte mère
• Un câble plat pour lecteur de disquette
• Un câble plat pour lecteur IDE
• Un CD d'installation automatique pour le logiciel
• Un écran pour panneau arrière d'entrées/sorties
• Un module de rétention
• Ce manuel utilisateur
Caractéristiques
Processeur La carte mère utilise un Socket A AMD 462 broches
supportant un bus frontal (FSB) de 133/166 MHz
Chipset Les chipsets SiS746 et SiS963/963L sont basés sur une
architecture novatrice et dimensionnable avec une fiabilité et
des performances prouvées. Quelques-unes des
caractéristiques avancées des chipsets sont:
• Supporte le CPU de Socket A AMD: 133/166 MHz
• Supporte la synchronisation Synchrone/Asynchrone
Hôte-t-DRAM: 133/200, 133/266, 133/333, 166/266,
166/333
• Supporte les SDRAM DDR 200/266/333
• Support jusqu’à 2 DIMM DDR333 sans tampon ou
jusqu’à 3 DIMM DDR266/200 sans tampon double face
• Conforme AGP v3.0
• Bus de données 16 bits Bi-directionnel
• Performances de 1 Go/s en mode 133MHz x 4
• Conforme aux Spécifications PCI 2.2
• Maîtrise de Liaison d’E/S Multiprocessus Intégrée avec
Flux en Pipeline de Lecture
• Supporte les schémas de Logiciel Amélioré et
Automatique pour accéder aux registres PHY
• Supporte Ultra DMA 33/66/100/133
• Compatible USB v2.0 et Interface de Contrôleur d’Hôte
Avancé (EHCI) v1.0
Les caractéristiques clé supplémentaires incluent le support
pour six ports USB 2.0, contrôleur Fast Ethernet MAC,
interface AC97, contrôleur d’hôte IEEE 1394
(excepté pour le
chipset SiS963L Southbridge), gestion d’alimentation avancée,
contrôleur DMA intégré et contrôleur de clavier.
Mémoire • Support de module mémoire DDR SDRAM jusqu’Ã
200/266/333 MHz
• Peut recevoir trois logements sans mémoire tampon en
2.5V de 184 broches
Product specificaties
| Merk: | ECS |
| Categorie: | Moederbord |
| Model: | L7S7A |
Heb je hulp nodig?
Als je hulp nodig hebt met ECS L7S7A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord ECS
6 Juli 2023
3 Juli 2023
28 Juni 2023
26 Juni 2023
25 Juni 2023
25 Juni 2023
25 Juni 2023
24 Juni 2023
23 Juni 2023
23 Juni 2023
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord Supermicro
- Moederbord Foxconn
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
25 April 2024
8 April 2024
8 April 2024
8 April 2024
8 April 2024
31 Maart 2024
31 Maart 2024
30 Maart 2024
30 Maart 2024
30 Maart 2024