EcoFlow PowerPulse 9.6KW Handleiding

Bekijk gratis de handleiding van EcoFlow PowerPulse 9.6KW (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.9 sterren uit 4 reviews. Heb je een vraag over EcoFlow PowerPulse 9.6KW of wil je andere gebruikers van dit product iets vragen? Stel een vraag

｜

1

IMPORTANT SAFETY INSTRUCTIONS

DISCLAIMER

This product includes essential printed documentation

required for setup and basic usage. For detailed manuals,

resources, and the most up-to-date information about the

product, visit https://www.ecoflow.com/support/download/.

Fully read and understand the product documentation prior

to use. Improper use may result in serious injury, damage, or

property loss. By using this product, you agree to and accept

all terms outlined in the product documentation. EcoFlow is

not liable for losses, damages, or injuries caused by misuse

or non-compliance.

SYMBOLS

The shell or nameplate of this product includes safety

symbols to indicate potential hazards. Please review these

signs and their meanings as detailed in the table below:

SymbolDescription

CAUTION

Disconnect the device from all voltage

sources before servicing.

Reading Manual

Read the user manual and

all safety instructions carefully before

installation, operation, and maintenance.

Save these instructions

Alternating-current Supply

Risk of Electric Shock

Grounding Terminal

OPERATING INSTRUCTIONS

WARNING – When using electric products, basic

precautions should always be followed, including the

following. This manual contains important instructions for

Models EF-EVAC-9K6-DIY that shall be followed during

installation, operation and maintenance of the unit.

a. Read all the instructions before using this product.

b. This device should be supervised when used around

children.

c. Do not put ngers into the electric vehicle connector.

d. Do not use this product if the exible power cord or

EV cable is frayed, has broken insulation, or any other

signs of damage.

e. Do not use this product if the enclosure or the EV

connector is broken, cracked, open, or shows any other

indication of damage.

INSTALLATION INSTRUCTIONS

1. Before installing, operating, and maintaining the

equipment, read and follow up Installation Guide and

Safety Instructions.

2. Do not work with power on during installation.

3. STORAGE INSTRUCTIONS – This device shall be

mounted at a sufcient height from grade such that the

height of the storage means for the coupling device

is located between 600 mm (24 inches) and 1.2 m (4

feet) from grade.

4. Wear proper PPE (Personal protective equipment)

before installation and maintenance of equipment.

5. Before connecting cables, ensure that the equipment is

intact. Otherwise, electric shocks or re may occur.

EcoFlow PowerPulse EV Charger (9.6kW)

V1.1

6. Use the product as intended and in a safety-conscious

manner. Have faults and damage that could impair

safety rectied immediately by EcoFlow or a certied

EcoFlow partner.

7. Do not touch the exposed cable with your hands.

8. Make sure the cables, connectors and ports are dry

before starting up the equipment. Make sure all three

are connected securely.

9. Tighten the screws to the specied torque using tools

when installing the equipment.

10. After installing the equipment, remove the remnants

of the device installation area, such as cardboard

boxes, foam, plastic, wire ties, stripped insulation

materials, etc.

11. All warning label and nameplates on the equipment

should be visible after installation is complete. Do

not scrawl, damage, or block any warning label on

the device.

12. Do not reverse engineer, decompile, disassemble,

adapt, add code to the device software or alter the

device software in any other way. Any other operation

that violates the original design specications of the

device hardware and software is not allowed.

13. Do not connect other loads under the equipment, which

should be installed in a dedicated electric circuit.

PERSONNEL REQUIREMENTS

1. Only qualied professionals are allowed to install,

operate, and maintain the equipment.

2. USER MAINTENANCE INSTRUCTIONS – Personnel

who plan to install or maintain EcoFlow equipment

must receive thorough training, understand all

necessary safety precautions, and be able to correctly

perform all operations.

ELECTRICAL SAFETY

INSTRUCTIONS PERTAINING TO A RISK OF FIRE OR

ELECTRIC SHOCK – Before connecting cables, ensure that

the equipment is intact. Otherwise, electric shocks or fire

may occur.

GROUNDING INSTRUCTIONS

1. An insulated grounding conductor that is identical in

size, insulation material, and thickness to the grounded

and ungrounded branch-circuit supply conductors,

except that it is green with or without one or more

yellow stripes, shall be installed as part of the branch

circuit that supplies the device or system.

2. The grounding conductor described in item 1 shall be

grounded to earth at the service equipment or, when

supplied by a separately derived system, at the supply

transformer.

3. This product must be connected to a grounded, metal,

permanent wiring system, or an equipmentgrounding

conductor must be run with the circuit conductors and

connected to the equipment grounding terminal or lead

on the product.

4. This product must be grounded. If it should malfunction

or break down, grounding provides a path of least

resistance for electric current to reduce the risk of

electric shock. This product is equipped with a cord

having an equipment grounding conductor and a

grounding plug. The plug must be plugged into an

appropriate outlet that is properly installed and

grounded in accordance with all local codes and

ordinances.

5. WARNING – Improper connection of the equipment-

grounding conductor is able to result in a risk of electric

shock. Check with a qualied electrician or serviceman

if you are in doubt as to whether the product is properly

grounded. Do not modify the plug provided with the

product – if it will not t the outlet, have a proper outlet

installed by a qualied electrician.

6. For the equipment that needs to be grounded, install

the ground cable rst when installing the equipment

and remove the ground cable last when removing the

equipment.

7. Do not damage the ground conductor.

8. Do not operate the equipment in the absence of a

Product specificaties