Easy Home GT-SF-DBL-02 Handleiding

Easy Home Strijkijzer GT-SF-DBL-02

Lees hieronder de 📖 handleiding in het Nederlandse voor Easy Home GT-SF-DBL-02 (6 pagina's) in de categorie Strijkijzer. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
User Manual
LAUNDRY
Original instructions
STEAM IRON
9
Safety
Caution!
Hot surface!
- Always unplug the mains plug when the appliance is not in
use, before cleaning and in case of malfunction or electrical
storms! Never pull on the mains lead! Risk of electrocution!
- Ensure that the mains lead and the appliance are never
placed on hot surfaces or near sources of heat. Put the mains
lead where it will not be in contact with hot or sharp-edged
objects. Risk of electrocution!
- Never fold the mains lead or wind it round the appliance, as
this could cause the cable to break. Risk of electrocution!
- Do not use the appliance if you are on a damp surface, or if
your hands or the appliance are wet. Risk of electrocution!
- Do not open the appliance and never attempt to insert metal
objects inside. Risk of electrocution!
Dangers when operating the steam iron
Caution! Surfaces become hot during use. Never touch the hot
surfaces, and remember that the appliance can remain very
hot for some time after use.
- The iron may not be left unattended while it is connected to
the mains.
- The mains plug must be removed from the electrical socket
before filling or emptying the water tank.
- The filling opening must not be opened during operation.
Consult the chapter “Filling the water tank”.
- The iron must be operated and stored on a stable surface.
15
Operation
Switching on the appliance
• Then insert the mains plug of the steam iron into a correctly installed electrical
socket.
The display colour changes based on the operating status and/or the
temperature range set. The colours are as follows:
Standby mode: display is red.
Temperature settings 1-7: display is violet.
Temperature settings 8-11: display is blue
• An audible signal sounds and the display 4 briefly shows all symbols. Shortly
afterwards, the display changes to show “STdby” G in red, indicating that the
appliance is connected to the mains power supply and is ready to be used.
• Briefly press the 7 “Increase temperature” button once. The display turns violet
and a “1” and the flashing word acrylic are shown on the display. The appliance is
ready to be used once the flashing stops.
Setting the temperature
Temperature control settings:
LC-
Display 4
Fabric
type
LC-
Display 4
Fabric
type
LC-
Display 4
Fabric
type
Acrylic Silk Cotton
Nylon Polyester Jeans
Satin Blended
fabric Linen
Viscose
(artificial silk) Wool

Product specificaties

Merk: Easy Home
Categorie: Strijkijzer
Model: GT-SF-DBL-02

Heb je hulp nodig?

Als je hulp nodig hebt met Easy Home GT-SF-DBL-02 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Strijkijzer Easy Home

Easy Home

Easy Home GT-SF-DBL-02 Handleiding

2 Juli 2023
Easy Home

Easy Home GT-SI-lcd-03-IT Handleiding

30 Juni 2023
Easy Home

Easy Home GT-SF-DBL-01-CH Handleiding

28 Juni 2023
Easy Home

Easy Home GT-SI-lcd-03-UK Handleiding

27 Juni 2023

Handleiding Strijkijzer

Nieuwste handleidingen voor Strijkijzer

Di4

Di4 Jet Pressing 2850W Handleiding

15 April 2024
Di4

Di4 Vapore Stiro 3000 Handleiding

15 April 2024
Di4

Di4 Jet Pressing Infinity Handleiding

15 April 2024
Di4

Di4 Jet Pressing Facile Handleiding

15 April 2024
Di4

Di4 Jet Pressing Pro 5b Handleiding

15 April 2024
Melissa

Melissa 16390057 Handleiding

11 April 2024
Hacienda

Hacienda CSI232 Handleiding

11 April 2024
Bosch

Bosch Serie 8 VarioComfort TDS8060DE Handleiding

9 April 2024
Essentiel B

Essentiel B Iris EFV 2402 Handleiding

9 April 2024
Philips

Philips Perfective GC5010 Handleiding

5 April 2024