Eastron SDM630MCT V2 Handleiding

Eastron Niet gecategoriseerd SDM630MCT V2

Lees hieronder de 📖 handleiding in het Nederlandse voor Eastron SDM630MCT V2 (26 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 438 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/26

EASTRON SDM630MCT V2 User Manual

Address: No.1369 Chengnan Road, Jiaxing, Zhejiang, 314001, China.

Tel: 0086-573-83698881/83698882 Fax: 0086-573-83698883 Web: www.eastron.com.cn

SDM630MCT V2

D Rail Energy Meter for Single and Three Phase Electrical SystemsIN

 Measures kWh Kvarh, KW, Kvar, KVA, P,

F, PF, Hz, dmd, V, A, THD,etc.

 Bi-direconal measurement IMP & EXP

 Two pulse outputs

 RS485 Modbus

 Din rail mounting 35mm

 1/5A connecon CT

 Beer than Class 1 / B accuracy

USER MANUAL

2016 V 84.

EASTRON SDM630MCT V2 User Manual

Address: No.1369 Chengnan Road, Jiaxing, Zhejiang, 314001, China.

Tel: 0086-573-83698881/83698882 Fax: 0086-573-83698883 Web: www.eastron.com.cn

- -1

Introducon

This document provides operang, maintenance and installaon instrucons. The unit measures

and displays the characteriscs of single phase two wires (1p2w three phase three wires(3p3w,) ),

and three phase four wires(3p ) supplies, including voltage, frequency, current, power ,acve 4w

and reacve energy, imported exported. Energy is measured in terms of kWh, kVArh. or

Maximum demand current can be measured over preset periods of up to 60minutes. In order to

measure energy, the unit requires voltage and current inputs in addion to the supply required to

power the product. e requisite current input(s) are obtained via current transformers(CT). Th

This meter can be congured to work with a wide range of CTs, giving the unit a wide range of

operaon. Built-in interfaces provides pulse and RS485 Modbus RTU outputs. Conguraon is

password protected.

This unit can be powered from a separate auxiliary (AC or DC) supply. Alternatively it can be

powered from the monitored supply, where appropriate.

Unit Characteriscs

The Unit can measure and display:

 Line voltage and THD% (total harmonic distoron) of all phases

 Line Frequency

 Currents, Current demands and current THD% of all phases

 Power, maximum power demand and power factor

 Acve energy imported and exported

 Reacve energy imported and exported

The unit has password- otected set-up screens for: pr

 Changing password

 Supply system selecon 1p2w, 3p3w,3p 4w

 Demand Interval me

 Reset for demand measurements

 Pulse output duraon

Two pulse output indicates real-me energy measurement. An RS485 output allows remote

monitoring from another display or a computer.

Current Transformer Primary Current

The unit can be congured to operate with CT rao between primary current and secondary

current. The secondary CT has two opons: 1A/5A

RS485 Serial Modbus RTU

–

––

This uses an RS485 serial port with Modbus RTU protocol to provide a means of remotely

monitoring and controlling the Unit

Set-up screens are provided for seng up the RS485 port.

EASTRON SDM630MCT V2 User Manual

Address: No.1369 Chengnan Road, Jiaxing, Zhejiang, 314001, China.

Tel: 0086-573-83698881/83698882 Fax: 0086-573-83698883 Web: www.eastron.com.cn

- -2

Pulse output

This provides two pulse outputs that clock up measured acve and reacve energy. The constant

for acve energy is 3200imp/kWh(Terminals 11&12). The pulse width for pulse 1(Terminals 9&10)

can be set from the set-up menu.

Start Up Screens

The rst screen lights all display up

segments and can be used as a display

check.

The second screen indicates the

rmware installed in the unit and its

build number.

The interface performs a self-test a nd

indicates

the result if the test passes.

*Aer a short delay, the screen will display acve energy measurements.

Measurements

The buons operate as follows:

Selects the Voltage and Current display screens

In Set-up Mode, this is the “Le” or “Back”

buon.

Select the Frequency and Power factor display

screens

In Set-up Mode, this is the “Up” buon

Select the Power display screens

In Set-up Mode, this is the “Down” buon

Product specificaties

Merk:	Eastron
Categorie:	Niet gecategoriseerd
Model:	SDM630MCT V2

Vragen van gebruikers

Hoe kan ik de nederlandse handeling lezen van eastron sdm630mctv2

P.J. van den Bergh - 21 Juni 2023

Heb je hulp nodig?

Als je hulp nodig hebt met Eastron SDM630MCT V2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Eastron

Eastron SDM630MCT V2 Handleiding

27 November 2022

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024