Eastron SDM630MCT-RC Handleiding
Pagina's 2 Meetapparatuur
Bekijk de handleiding van Eastron SDM630MCT-RC gratis online of download de PDF. Deze handleiding is 24 keer bekeken. Vraag over dit model? Stel een vraag
The primary current ranges from 1A to 5000A with 3 selectable
scales. The CT1 setting depends on the current input of
Rogowski coils.
If the input of coils is 500A, the CT1 should be set to 0.5kA.
If the input of coils is 1000A, the CT1 should be set to 1kA.
If the input of coils is 5000A, the CT1 should be set to 5kA.
This document provides operating, maintenance and installation
instructions. The SDM630MCT-RC is an innovative instrument
for measurement and recording electrical parameters. It is
particularly suitable for consumption measurement and analysis
with high quality and stability. The meter directly connects with
Rogowski coils for current measurement without integrator. It
measures and displays the characteristics of single phase two
wire(1p2w) and three phase four wire(3p4w) networks. The
measuring parameters include voltage(V), frequency(Hz),
current(A), power(kW/kVA/kVAr), import, export and total
energy(kWh/kVArh).
The unit can also measure Maximum demand current and
power, which is measured over preset periods of up to 60
minutes.
SDM630MCT-RC can communicate through the RS485 serial
port by MODBUS RTU protocol. Configuration is password
protected.
Neutral Current
4.2 Communocation
4.2.1 RS485 Address
4.2.2 Baud Rate
4.2.3 Parity
4.2.4 Stop Bits
4.3 CT
4.4 PT
Product specificaties
| Merk: | Eastron |
| Categorie: | Meetapparatuur |
| Model: | SDM630MCT-RC |
Heb je hulp nodig?
Als je hulp nodig hebt met Eastron SDM630MCT-RC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden