EarthQuaker Devices Bit Commander V2 Handleiding

Bekijk gratis de handleiding van EarthQuaker Devices Bit Commander V2 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 22 mensen en kreeg gemiddeld 4.3 sterren uit 7 reviews. Heb je een vraag over EarthQuaker Devices Bit Commander V2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

OPERATION MANUAL

©2018 EarthQuaker Devices LLC

<<< Power Requirements >>>

<<< Tech Specs >>>

•Current Draw: 25mA

• This device take a standard 9 volt DC power supply with a 2.1mm negative center barrel. We

always recommend pedal-specic, transformer-isolated wall-wart power supplies or multiple

isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power.

Switching-type power supplies, daisy chains and non-pedal specic power supplies do not lter

dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

•Input Impedance: 50K Ohm• Output Impedance: <500 Ohm

<<< Warranty >>>

This device has a limited lifetime warranty. If it breaks, we will x it. Should you encounter any

issues, please email info@earthquakerdevices.com.

www.earthquakerdevices.com

<<< Switching >>>

This device is true bypass and uses electronic relay-based switching. Audio will not pass

without power.

Product specificaties