Earthquake Sound SWS-8X Handleiding
Earthquake Sound
Subwoofer
SWS-8X
Bekijk gratis de handleiding van Earthquake Sound SWS-8X (6 pagina’s), behorend tot de categorie Subwoofer. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.7 sterren uit 2 reviews. Heb je een vraag over Earthquake Sound SWS-8X of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/6
SWS-6.5X ( )
SWS-8X ( )4-Ohm
SWS-8Xi ( )2-Ohm
SWS-10X ( )4-Ohm
SWS-12X ( )4-Ohm
SWS-15X ( )4-Ohm
Installation Reference Guide
4-Ohm
www.earthquakesound.com
Sound That Will YouMove
The Sound That Will Move You.
Earthquake Sound reserves the right to amend details of the specications without notice.
Copyright © Earthquake Sound Corporation
Earthquake Sound Corporation • 2727 McCone Avenue Hayward CA, 94545
Phone: 510-732-1000 Fax: 510-732-1095
US PATENT # 6,675,931 B2
S H A L L O W W O O F E R S Y S T E M
Model
Revc. (Ohms)
Fo. (Hz)
Sd. (msqM)
BL. (TM)
Qms.
Qts.
SPLo. (dB)
Vas. (Ltr)
Xmax (mm)
(Xmax Measured In One Direction)
Qes.
SWS-6.5X
3.600
39.31
12.500
4.350
4.192
1.723
1.221
77.3
9.94
15
27.830
23
SWS-8 /8XiX
3.500
30.394
22.000
6.210
3.987
0.804
0.669
86.7
51.479
28
SWS-10X
3.700
28.477
33.000
22.095
5.02
0.51
0.46
88.2
149.612
31
SWS-12X
3.700
24.006
53.000
10.642
3.56
0.515
0.45
89.4
203.112
34
SWS-15X
3.400
21.006
89.000
10.956
3.847
1.02
0.65
90.4
Congratulations are in order... You are now the proud owner of an SWS Shallow Mount
Woofer: the most advanced
shallow woofer technology to hit car and home audio. The idea is simple: to generate deep
bass from the shallowest space. For years, audio manufacturers attempted to reduce the
mounting depth of a driver; nevertheless the speaker size/diameter still played a major role
in dictating the mounting depth. Approximately, a speaker mounting depth remained to be
about ½ the size of the speaker diameter: the larger the speaker the deeper the mounting
depth.
Audio, video, and data processing components have gotten better, faster and smaller. This
is true except when it
comes to speakers design, conventionally designed drivers remain “bulky” in comparison to
other audio components. In 1929, Mr. H. Shotwell designed the rst “front loaded magnet”
driver, it was a small step in reducing the mounting depth of driver. Since then, other audio
manufacturers (such as Bose, Harmon and others) made several attempts to reduce the
mounting depth of a driver. Nevertheless, the speaker mounting depth remained to be
about roughly half the size of the speaker diameter - the larger the speaker the deeper the
mounting depth. This “handicap” held true until few years ago when Joseph J. Sahyoun
(Vice President, Inventor, and Head Engineer at Earthquake Sound Corporation) started
developing the shallow mount woofer system (SWS). The “SWS” presented a radical
solution away from the conventional “bulky” speaker design.
The SWS design reduces the mounting depth of a speaker by over 60% without taxing its
performance. These
numbers look even better as the speaker diameter increases. A conventional 12” woofer
has a mounting depth of 6 to 7 inches (for a ± 1” excursion); on the other hand, an SWS-12
performs the same in a little less than 3” of mounting depth. The SWS design allows the
installer to use compact enclosures, whereby the mounting depth is about 1.5 times the
peak-to-peak excursion. The SWS technology makes the speaker mounting depth
“excursion-dependent” and not “diameter-dependent”. Once a target Xmax is set, the
mounting depth follows (1.5 times the peak to peak excursion); the Xmax remains
independent from the size (diameter) of the speaker. The SWS opens the door for
unrestricted bass applications where a conventional subwoofer could never be used.
In home applications, SWS allows the designer to build 12” in wall woofer that moves 2”
peak to peak while
maintaining a mounting depth of less than 3”. This technology opens the door for home
theater designers to squeeze large woofers in very tight spaces / closets, also to do in-wall
woofer application. In car applications, rear-deck subwoofer mount - used by manufacturers
of luxury automobiles- represents a prefect example of a totally stealth install (using 10”,
12”, 15” SWS). 8” door mount with 1” peak to peak now is possible where mounting depth
is a mere 1.5”; with a possibility of using 10” SWS in the doors of larger SUV's.
The aluminum custom-made cone and dust cap are designed to reduce the voice coil
temperature by dissipating the
heat that builds up in the voice coil. The dust cap is directly fastened to the voice coil
aluminum bobbin, it transfers the heat build-up from the bobbin into the cone. Both dust cap
and cone act as a giant heat sink to reduce the voice coil temperature and increase its
power handling and endurance. The high roll pressed-foam surround is coupled with a
propagating spider to allow for extreme excursions with no limitations. The slick shallow
basket is coated with black chrome and is shaped with slant edges for easy install in tight
spaces.
DEAR VALUED CUSTOMER
www.earthquakesound.com
SWS PARAMETERS
NOTE: The 2-Ohm SWS-8Xi is designed to replace subwoofer in factory
upgraded vehicles, such as BMW's, Corvettes, Mercedes Benz and
much more.
2 3
All Specications Are Subject To Change Without Notice
SPECIFICATIONS
SWS-15X
• Speaker diameter = 15"
• Mounting depth = 3 1/4"
• Cut out mounting hole = 13 3/4"
• Weight = 15Lbs
• Voice Coil diameter = 2.5"
• Aluminum bobbin / wire
• Power rating RMS = 400W
• Power rating MAX = 800W
• Revc = 3.76 Ohms
(81mm)
(3 1/4")
(350mm / 13 3/4")
(cut out hole diameter)
Actual RMS power varies based on box design and on music played
SWS-12X
(75mm)
(3")
(288mm / 11 3/8")
(cut out hole diameter)
Actual RMS power varies based on box design and on music played
• Speaker diameter = 12"
• Mounting depth = 3"
• Cut out mounting hole = 11 3/8"
• Weight = 13Lbs
• Voice Coil diameter = 2.5"
• Aluminum bobbin
• Power rating RMS = 300W
• Power rating MAX = 600W
• Revc = 3.76 Ohms
SWS-10X
(68mm)
(2 11/16")
(228mm / 9")
(cut out hole diameter)
Actual RMS power varies based on box design and on music played
• Speaker diameter = 10"
• Mounting depth = 2 11/16"
• Cut out mounting hole = 9"
• Weight = 11Lbs
• Voice Coil diameter = 2"
• Aluminum bobbin
• Power rating RMS = 200W
• Power rating MAX = 400W
• Revc = 3.76 Ohms
SWS-6.5X
(45mm)
(1 3/4")
(142mm / 5 3/4")
(cut out hole diameter)
Actual RMS power varies based on box design and on music played
• Speaker diameter = 6.5"
• Mounting depth = 1 3/4"
• Cut out mounting hole = 5 3/4"
• Weight = 5 Lbs
• Voice Coil diameter = 1"
• Aluminum bobbin
• Power rating RMS = 100W
• Power rating MAX = 200W
• Revc = 3.6 Ohms
SWS Enclosures
SWS subwoofers are designed to bring bass virtually anywhere in a car: in front doors,
rear doors, dash board, center console, under seats, rear decks, and in any space limited
mounting depth. The following volumes shown below are created to give you optimized
"deep bass from the shallowest space".
In order to match a box volume that bests suites your needs, you will need to nd out the
amount of space that you have to work with, then use the formula below to nd out which
range you will should be in based on our recommendations.
Choosing an enclosure type that perfectly tailors to your needs can sometimes be a hassle
and unfortunately choosing or building the wrong enclosure could potentially destroy the
sound quality of your system. The SWS subwoofers deliver truly prenominal bass response
from the shallowest of places. And in order to harness their greatness you will need to
make sure that your enclosure will be suce for your application.
Sealed Enclosures:
Do you often turn the bass down on a car or home stereo system because it sounds boomy
to you? If you do, a sealed enclosure is an excellent choice, especially if you listen to a
wide variety of music. This type of enclosure produces well-dened, strong, but not
overpowering bass.
Bandpass Enclosures:
This bass is not really punchy, it's more like a massive, swampy force of low end that
powers the music which can be great for some tunes and extremely overwhelming on
others. If you prefer the harder stu (metal, hard rock, industrial) or music with impact bass
content (reggae, hip hop) and you like your bass to be LOUD, the bandpass box is a great
way to go. And, if your amplier is lacking in the power department, you'll get the most bang
for your buck from this design.
Ported Enclosure:
The ported box is also exceptionally loud, so it will also be a good choice if you have limited
power available. If you listen to a wide range of music and if you're always cranking up the
bass when you listen to tunes.
SWS-8 /8XiX
(52mm)
(2 1/8")
(206mm / 8- 1/8")
(cut out hole diameter)
Actual RMS power varies based on box design and on music played
• Speaker diameter = 8"
• Mounting depth = 2 1/8"
• Cut out mounting hole = 7 7/8"
• Weight = 8 Lbs
• Voice Coil diameter = 1.5"
• Aluminum bobbin
• Power rating RMS = 150W
• Power rating MAX = 300W
• Revc = 8=3.76 Ohms / 8Xi=1.76 Ohms
Earthquake Subwofoers are capable of generating high sound pressure
levels. You should exercise caution when operating these
subwoofer/amplier systems. Long term exposures to high levels of sound
pressure will cause permanent damage to your hearing. Sound pressure levels exceeding
85dB can be dangerous with constant exposure. Set your audio system to a comfortable
loudness level. Earthquake Sound Corporation does not assume liability for damages
resulting from the direct use of Earthquake ampliers or other Earthquake products , and
urges users to play their music at moderate listening levels.
CAUTION:
THE CHART (ON THE SIDE)
S H O W S T H E U . S .
G O V E R N M E N T S
OCCUPATIONAL SAFETY AND
H E A LT H AD M I N I S T R AT I O N
(OSHA) REGULATIONS WHICH
WERE IN EFFECT AT THE TIME
OF THI S PUBLI CATION FO R
P E R M I S S I B L E N O I S E
EXPOSURE, PER 29CFR1910.95,
TABLE G-16.
3
2
1 - 1 1/2
1
1/2
1/4 or le ss
8
6
4
97
100
102
105
110
115
90
92
95
SOUND L EVEL DBA
DURATI ON IN HOU RS
www.earthquakesound.com
4 5
All Specications Are Subject To Change Without Notice
CAUTION:
THE 2-OHM SWS-8XI
IS FOR FACTORY
UPGRADED VEHICLES
ONLY
Product specificaties
| Merk: | Earthquake Sound |
| Categorie: | Subwoofer |
| Model: | SWS-8X |
Heb je hulp nodig?
Als je hulp nodig hebt met Earthquake Sound SWS-8X stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Subwoofer Earthquake Sound
27 April 2025
25 April 2025
25 April 2025
25 April 2025
25 April 2025
25 April 2025
25 April 2025
25 April 2025
25 April 2025
25 April 2025
Handleiding Subwoofer
- Indiana Line
- Massive
- Pyle
- Fender
- Sonance
- REL Acoustics
- Atlas Sound
- Hertz
- Diamond Audio
- Roland
- Sonus Faber
- Vonyx
- DS18
- Bowers Wilkins
- Boston Acoustics
Nieuwste handleidingen voor Subwoofer
11 Juni 2025
11 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
7 Juni 2025
5 Juni 2025
4 Juni 2025
2 Juni 2025