Earthquake Sound MC6 Handleiding


Bekijk gratis de handleiding van Earthquake Sound MC6 (4 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.5 sterren uit 3 reviews. Heb je een vraag over Earthquake Sound MC6 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/4
earthquakesound.com
The Sound That Will Move You.
Earthquake Sound reserves the right to amend details of the specications without notice.
Copyright © Earthquake Sound Corporation
Earthquake Sound Corporation 2727 McCone Avenue Hayward CA, 94545 Phone: 510-732-1000 Fax: 510-732-1095
The Sound That Will Move You.
MC5
5 MATCHED COMPONENT SET
2-WAY 5 COAXIAL SPEAKER
Owners Manual & Warranty
EARTHQUAKE MARINE SPEAKERS
6 MATCHED COMPONENT SET
2-WAY 6 COAXIAL SPEAKER
MC6
Five (5) year limited warranty:
Earthquake warrants the original purchaser that all Factory Sealed New Audio Products be free from defects in
material and workmanship under normal and proper use for a period of ve (5) years from the date of purchase (as shown on
the original bill of sale with serial number axed/written on it). The ve (5) year warranty period is valid only if an authorized
Earthquake dealer properly installs the product and the warranty registration card is properly lled out and sent to Earthquake
Sound Corporation. If a non-authorized party installs the product a ninety (90) day warranty period will be applied.
(A) Five (5) years limited warranty plan coverage guidelines:
First year: Earthquake pays for labor, parts, and return ground freight (only in US mainland, not including Alaska and
Hawaii).
Second year: Earthquake pays for labor and parts only, customer must pay freight both ways.
Third, fourth & fth year: Earthquake pays for labor only. Customer must pay for parts and freight both ways.
(B) Warning:
Products (sent for repair) that are tested by Earthquake technicians and deemed to have no problem(s) will not be
covered by the ve (5) year limited warranty. Customer will be charged a minimum of one (1) hour of labor (ongoing rates)
plus shipping charges back to customer.
(C) Earthquake will repair or replace - at our option - all defective products/parts subject to the following
provisions:
Defective products/parts have not been altered or repaired by other than an Earthquake factory approved technician.
Products/parts are not subjected to negligence, misuse, improper use, or accident, damaged by improper line voltage,
used with incompatible products, or have its serial number or any part of it altered, defaced or removed, or have been
used in any way that is contrary to Earthquake's written instructions.
(D) Warranty Limitations:
Warranty does not cover products that have been modied or abused. Including but not limited to the following:
Damages to speaker cabinet and cabinet nish due to misuse, abuse, or use of improper use of cleaning
materials/methods.
Bent speaker frame, broken speaker connectors, holes in speaker cone, surround & dust cap, burnt speaker voice coil.
Fading, deterioration of speaker components & nish due to improper exposure to elements.
Bent amplier casing, damaged nish on the casing due to abuse, misuse, or improper use of cleaning material.
Burnt traces on PCB.
Product/part damaged due to poor packaging or abusive shipping conditions.
Subsequent damage to other products.
warranty claim will not be valid if the warranty registration card is not properly lled out & returned to
Earthquake with a copy of the sales invoice.
A
(E) Service Request:
To receive product/s service, contact Earthquake's service department at (510) 732-1000 and request an RMA
number (Return Material Authorization); items shipped without a valid RMA number will be refused. Make sure you provide us
with your complete/correct shipping address, a valid phone number, and a brief description of the problem you are
experiencing with the product. In most cases, our technicians might be able to resolve the problem over the phone, thus
eliminating the need to ship the product.
(F) Shipping Instructions:
Product/s must be packaged in its original protective box(s) to minimize transport damage. Shipping claims
regarding items damaged in transit must be presented to carrier. Earthquake Sound Corporation reserves the right to refuse
any products improperly packed. Original bill of sale must accompany product returned for service. We encourage you to
include with the package a written description of the problem. Ship product to: Earthquake Sound Corp. 2727 Mc Cone
Avenue, Hayward, CA 94545. Ph (510) 732-1000. You are responsible for the cost of shipping the product to Earthquake
Sound Corporation.
(G) Disputes Resolution:
All disputes - between clients and Earthquake Sound Corporation - resulting from the ve (5) years limited
warranty policy must be resolved according to the laws & regulations of the county of Alameda -California.
Page# ……Warranty guidelines
Page# 4……Components set dimensions
Page# 5……Coaxial dimensions / Coaxial and component specs
Page# 6 & 7……Instalation
3
Table of Content
EARTHQUAKE SOUND
2
EARTHQUAKE SOUND 5-YEAR WARRANTY 3
Thank you for choosing Earthquake Sounds line of Earthquake Marine coaxial and component sets for superior
enhancement of your water craft audio system. With proper installation and responsible listening, your marine speakers will
give you years of near perfect sound reproduction.
We strongly recommend you to have your new marine speakers installed by an authorized Earthquake Sound dealer:
Installation professionals employed by your dealer have the correct tools and knowledge to install your speakers neatly and
successfully. Also, when your new products are installed by an authorized dealer, your product will include a FIVE YEAR
LIMITED WARRANTY. If you choose to perform your own installation, your warranty will be subject to limitations. Dealer
policies on handling warranty requests may vary from one dealer to the next. Please read the warranty information in its
entirety and use good judgment when making these vital decisions.
Please keep this warranty information in your les for
future reference if necessary. It is recommended that
you stick your serial number here for future reference.
SERIAL NUMBER
High-Performance, Protection and Sound Quality
All specications are subject to change without notice.
EARTHQUAKE SOUND
4
EARTHQUAKE SOUND MARINE COMPONENT & COAXIAL SPECIFICATIONS 5
MC, Tweeter Dimensions
Trim Ring Diameter
A
Cut Out Hole Diameter
B
2.15", 54.7mm
1.79, 45.6mm
This diagram displays only the raw tweeter.
Mounting components vary in size.
Total Depth
C
Mounting Depth
D
.925", 23.5mm
.71, 18.2tmm
A
C
D
A
B
MC Crossover Dimensions
Height
A
Width a
B
.97" 24.7mm
1.64" 41.8mm
This diagram displays only the crossover.
Mounting components vary in size.
Width
B
Depth
D
2.08" 53mm
.94" 24mm
A
C
MC5 WOOFER DIMENSIONS
Grille tray outer
diameter
A
166.5mm 6.55
Mounting depth
C
Magnet width
D
Cut out hole
E
Grille protrusion
B
61mm 2.40
20mm .78
129.0mm 5.07
87mm 3.42
+ 20mm .78 for x-over
a Magnet width
D
+ crossover
E
A
Da
D
C
B
MC6 WOOFER DIMENSIONS
Grille tray outer
diameter
A
190.5mm 7.5
Mounting depth
C
Magnet width
D
Cut out hole
E
Grille protrusion
B
59mm 2.32
29.5mm 1.16
147mm 5.78
90mm 3.54
+ 20mm .78 for x-over
a Magnet width
D
+ crossover
E
A
Da
D
C
B
M5 COAXIAL DIMENSIONS
Grille tray outer
diameter
A
165.5mm 6.51
Mounting depth
C
Magnet width
D
Cut out hole
E
Grille protrusion
B
62mm 2.44
21mm .82
130.0mm 5.11
87mm 3.42
M6 COAXIAL DIMENSIONS
Grille tray outer
diameter
A
190.2mm 7.48
Mounting depth
C
Cut out hole
E
Grille protrusion
B
59mm 2.32
26mm 1.02
147mm 5.78
Magnet width
D
90mm 3.54
A
B
C
D
E
A
B
C
D
E
MARINE MATCHED COMPONENT SPECIFICATIONS
Tweeter
Crossover Networks
Woofer
Nominal Impedance
4 ohm 4 ohm
Sensitivity
89 dB @ 1W/1M 89 dB @ 1W/1M
2-way network
Completely sealed
PEI dome20mm .78"
5 UV treated
25mm (over 1) ASV voice coil
Butyl rubber surround
poly injection cone body
75 watts RMS 145 watts max
MC5 (2-way)
Model
6.5
30mm (almost 1.25) ASV voice coil
Butyl rubber surround
UV treated poly injection cone body
PEI dome20mm .78"
2-way network
Completely sealed
85 watts RMS 165 watts max
MC6 (2-way)
Rec. Amp power
50Hz-22kHz 45Hz-22kHz
Frequency Response
MARINE COAXIAL SPECIFICATIONS
Woofer
Model
Tweeter
Frequency Response
Nominal Impedance
M5 (2-way)
5 poly injection cone body
Sealed motor structure
25mm (over 1) VC
Butyl rubber surround
UV treated
mylar dome20mm .78"
65Hz - 20kHz (±3dB)
89 dB @ 1W/1M
50-130 Watts RMS
4 ohm
M6 (2-way)
6 UV treated poly injection cone body
Sealed motor structure
25mm (over 1) VC
Butyl rubber surround
20mm .78" mylar dome
55Hz to 20kHz (±3dB)
90 dB @ 1W/1M
60-180 Watts RMS
4 ohm
B
B
B
B
BBa
Sensitivity
Rec. Amp power


Product specificaties

Merk: Earthquake Sound
Categorie: Speaker
Model: MC6

Heb je hulp nodig?

Als je hulp nodig hebt met Earthquake Sound MC6 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden