Earthquake Sound BT5.3NC Handleiding
Pagina's 2 Niet gecategoriseerd
Bekijk de handleiding van Earthquake Sound BT5.3NC gratis online of download de PDF. 3 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
(3) Bluetooth Auto Reconnect
When you shut down the BT5.3NC when not in use,
the device will automatically reconnect back to the
wireless device that it was previously paired to within
range.
(4) Auto Shutdown
The BT5.3NC will automatically shut down after 3
minutes when not connected to a device and without
buttons being pressed.
(5) Charging BT5.3NC
The BT5.3NC is rechargeable and supports 5V USB-C
charging. Only charge the device while it is not
powered on. While charging, the red LED will be solid
red and turn off once fully charged.
Technical Specications
Charge Limit Voltage: 5.25V
Charging Current: 300mA
Working Current: 32mA RX, 65mA TX
Shutdown Current: 20uA
Charging Time: 45 min
Working Hours: 6 hrs RX, 4 hrs TX
Battery Capacity: 200mA
Bluetooth Version: v5.3
Wireless Frequency: 2.403–2.480 GHz
Wireless Range: 50 ft (15 m)
Wireless Support: A2DP, AVCTP, AVDTP, AVRCP,
HFP, and SPP
Microphone Range: 1.5–6.5 ft (0.5–2 m)
Specications in this manual are subject to
change without notice.
Bluetooth® is the property of its respective
trademark holder and has no afliation with
Earthquake Sound Corporation.
connection is successful. When pairing is complete, the
red LED will be solid.
2.2 Playing Audio
Begin by inserting one end of the 3.5mm audio adapter into
the BT5.3NC AUX port and the other end into an audio
source with a 3.5mm AUX port. You may also utilize a
3.5mm to RCA cable if needed. Press the play button on the
connected device to play audio.
• Pause/Play: Press the Multifunction Button (4) to pause/
play a song.
• Previous Track: Previous Track Button (7) does not work.
• Next Track: Next Track Button (5) does not work.Volume
Up or Down: Hold down either the Next Track or
Previous Track Buttons to increase or decrease volume.
• Next Track: Press the Next Track Button (5) to skip to
the next track.
• Volume Up or Down: Hold down either the Next Track or
Previous Track Buttons to increase or decrease volume.
1.3 Making Hands-Free Calls
• Redial a Call: While in the connected state, just double-
click the Multifunction Button (4) to dial the number you
called last.
• Answer and Hang Up a Call: If you receive an incoming
call while connected, press the Multifunction Button (4)
once to answer it and again to hang up and end the call.
• Reject a Call: When you don't want to answer an
incoming call, press and hold the Multifunction Button
(4) to reject it.
(2) TX Transmitter Mode
2.1 Pairing the Device
• First, long press the Multifunction Button (4) for 3
seconds to turn the device on. When TX mode is set, the
red LED will turn on and blink. This indicates that the
BT5.3NC is searching for a connection.
• Turn your Bluetooth-enabled device on and make sure it
is in pairing mode. If using wireless headphones/earbuds
most will have a button on the cradle to initiate pairing
mode. This will allow the BT5.3NC to nd your
headphones/earbuds.
• Wait until the connected device indicates that the
Operating Instructions
(1) RX Receiver Mode
Connecting your smartphone or mobile device to the
BTA5 via Bluetooth in RX Receiver mode:
1.1 Pairing the Device
• First, long-press the Multifunction Button (4) for 3
seconds to turn on the BT5.3NC. When RX mode is
active, the blue LED will blink.
• Next, turn on Bluetooth on your device and search for
the name "BT5.3NC".
• Finally, select "BT5.3NC" to begin the pairing process.
• The voice prompts "Wireless connection successful" and
the blue LED will be solid. The pairing is complete.
1.2 Playing Audio
Begin by inserting one end of the included 3.5mm mini jack
adapter into the AUX port of the BT5.3NC, and the other
end into either a loudspeaker, speaker, car stereo AUX
port, or other type of player that supports a 3.5mm input.
You may also utilize a 3.5mm to RCA cable if needed. Once
connected, the music on your mobile phone can be played.
• Pause/Play: Press the Multifunction Button (4) to pause/
play a song.
• Previous Track: Press the Previous Track Button (7) to
skip to the previous track.
1. Microphone
2. 3.5mm AUX Port
3. RX/TX Mode Switch
4. Multifunction Button
5. Next Track/Volume +
6. USB Type-C 5V Charging Port
7. Previous Track/Volume −
8. RX/TX Mode Indicators
Product Overview
4
57
6
8
1
2
3
Product Introduction
The Earthquake BT5.3NC is a Bluetooth® wireless adapter
that supports both receiver and transmitter modes. With its
low distortion, low power consumption, low latency, high-
delity, and stereo operation, this smart wireless adapter is
perfect for a broad range of audio applications. Whether you
want to stream music from your mobile device to your home
speakers, car speakers, MP3/CD player, computer, or other
audio equipment, or transfer audio from headphones and
speakers to your devices, the Earthquake BT5.3NC offers
exibility and convenience in a compact and portable design.
Key Features
• Bluetooth® v5.3
• Switchable receiver (RX) and transmitter (TX)
• USB Type-C rechargeable battery
• Up to 50ft (15m) wireless range
• Compact and portable design
• 6 hours of music playback
• Auto shutdown after 3 minutes of inactivity
• Auto-reconnect with devices within range
• aptX/AAC/SBC/MP3/FastStream support
• Built-in noise-canceling microphone
• Support for hands-free calling
• Dual connection support
• 3.5mm AUX IN/OUT
USER MANUAL
Earthquake Sound Corporation
2727 McCone Ave.
Hayward, CA 94545. USA
www.earthquakesound.com
Bluetooth
®
Wireless
Transmitter & Receiver
Audio Adapter
BT5.3NC
Product specificaties
| Merk: | Earthquake Sound |
| Categorie: | Niet gecategoriseerd |
| Model: | BT5.3NC |
Heb je hulp nodig?
Als je hulp nodig hebt met Earthquake Sound BT5.3NC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden