EA Elektro Automatik EA-PS 10060-120 2U Handleiding
Pagina's 68 Niet gecategoriseerd
Bekijk de handleiding van EA Elektro Automatik EA-PS 10060-120 2U gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag

© EA Elektro-Automatik in 2022, this information is subject to change without notice06230940_manual_ps_10000_2u_3kw_en_02
EA-PS 10000 2U
Programmable DC Power Supplies
MANUAL

© EA Elektro-Automatik in 2022, this information is subject to change without notice206230940_manual_ps_10000_2u_3kw_en_02
TABLE OF CONTENTS
1. General
1.1 About this document 4
1.1.1 Retention and use 4
1.1.2 Copyright 4
1.1.3 Validity 4
1.1.4 Symbols and warnings 4
1.2 Warranty 4
1.3 Limitation of liability 4
1.4 Disposal of equipment 5
1.5 Product key 5
1.6 Intended usage 6
1.6.1 Symbols and warnings on the device 6
1.7 Safety 7
1.7.1 Safety notices 7
1.7.2 Responsibility of the operator 8
1.7.3 Requirements to the user 8
1.7.4 Responsibility of the user 8
1.7.5 Alarm signals 9
1.7.6 Functionality test 9
1.8 Technical data 10
1.8.1 Approved operating conditions 10
1.8.2 General technical data 10
1.8.3 Specific technical data 11
1.8.4 Views 15
1.8.5 Control elements 17
1.9 Construction and function 18
1.9.1 General description 18
1.9.2 Block diagram 18
1.9.3 Scope of delivery 19
1.9.4 Accessories 19
1.9.5 Options 19
1.9.6 The control panel (HMI) 20
1.9.7 USB port (rear side) 22
1.9.8 Interface module slot 23
1.9.9 Analog interface 23
1.9.10 “Share BUS” connector 23
1.9.11 “Sense” connector (remote sensing) 24
1.9.12 Master-Slave bus 24
1.9.13 Ethernet port 24
2. Installation & commissioning
2.1 Transport and storage 25
2.1.1 Transport 25
2.1.2 Packaging 25
2.1.3 Storage 25
2.2 Unpacking and visual check 25
2.3 Installation 25
2.3.1 Safety procedures before installation and use 25
2.3.2 Preparation 25
2.3.3 Installing the device 26
2.3.4 Connection to AC supply 27
2.3.5 Connection to DC loads 29
2.3.6 Connection of remote sense 30
2.3.7 Grounding of the DC output 30
2.3.8 Installation of an interface module 31
2.3.9 Connecting the analog interface 32
2.3.10 Connecting the Share bus 32
2.3.11 Connecting the USB port (rear side) 32
2.3.12 Initial commission 32
2.3.13 Commission after a firmware update or a long
period of non-use 32
3. Operation and application
3.1 Personal safety 33
3.2 Operating modes 33
3.2.1 Voltage regulation / Constant voltage 33
3.2.2 Current regulation / constant current / current
limiting 34
3.2.3 Power regulation / constant power / power
limiting 34
3.2.4 Internal resistance regulation 34
3.3 Alarm conditions 35
3.3.1 Power Fail 35
3.3.2 Overtemperature 35
3.3.3 Overvoltage protection 35
3.3.4 Overcurrent protection 35
3.3.5 Overpower protection 35
3.3.6 Safety OVP 36
3.3.7 Share bus fail 36
3.4 Manual operation 37
3.4.1 Switching on the device 37
3.4.2 Switching the device off 37
3.4.3 Configuration via the menu 37
3.4.4 Adjustment limits 45
3.4.5 Changing the operating mode 45
3.4.6 Manual adjustment of set values 46
3.4.7 Switching the DC output on or off 47
3.4.8 Recording to USB stick (logging) 47
3.4.9 The quick menu 48
3.4.10 The graph 49
3.5 Remote control 50
3.5.1 General 50
3.5.2 Control locations 50
3.5.3 Remote control via a digital interface 50
3.5.4 Remote control via the analog interface 52
3.6 Device alarm handling 56
3.7 Locking the control panel (HMI) 58

© EA Elektro-Automatik in 2022, this information is subject to change without notice306230940_manual_ps_10000_2u_3kw_en_02
3.8 Locking the adjustment limits and user pro-
files 58
3.9 Loading and saving user profiles 59
3.10 Other applications 60
3.10.1 Parallel operation in master-slave (MS) 60
3.10.2 Series connection 64
3.10.3 SEMI F47 64
4. Service and maintenance
4.1 Maintenance / cleaning 65
4.1.1 Battery replacement 65
4.2 Fault finding / diagnosis / repair 65
4.2.1 Firmware updates 65
4.2.2 Trouble-shooting device problems 66
5. Contact and support
5.1 General 67
5.2 Contact options 67
Attention! The part of this document that deals with the handling of features on the control panel is only valid
for devices with firmwares “KE: 3.02”, “HMI: 3.02” and “DR: 1.0.2.20” or higher.
Product specificaties
| Merk: | EA Elektro Automatik |
| Categorie: | Niet gecategoriseerd |
| Model: | EA-PS 10060-120 2U |
Heb je hulp nodig?
Als je hulp nodig hebt met EA Elektro Automatik EA-PS 10060-120 2U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden