E-flite Apprentice 15e PNP Handleiding

E-flite Speelgoed Apprentice 15e PNP

Lees hieronder de 📖 handleiding in het Nederlandse voor E-flite Apprentice 15e PNP (28 pagina's) in de categorie Speelgoed. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
Specifications
Wingspan: 58 in (1475mm)
Length: 37 in (940mm)
Wing Area: 525 sq in (33.7 sq dm)
Weight w/o Battery: 32–35 oz (910–1000 g)
Weight w/Battery: 40–45 oz (1135–1275 g)
Apprentice 15e PNP™
Assembly Manual
2 E-flite Apprentice PNP Assembly Manual
Product Registration
Register your product online at:
www.e-fliterc.com/register/
Contents of Kit/Parts Layout
EFL2726 Wing Set
EFL2727 Fuselage
EFL2728 Tail Set
EFL2729 Cowl
EFL2730 Pushrod Set
EFL2731 Nose Gear
EFL2732 Main Landing Gear
EFL2733 Spinner
EFL2734 Motor Mount
EFL2735 5mm Prop Adapter
EFLA1030 30-Amp Pro Switch-mode
BEC Brushless ESC
EFLM7215 BL15 Outrunner, 840Kv motor
EFLP11080E 11 x 8 Electric Propeller
EFLR7140 13-gram Sub-Micro Servo
(used on elevator and ailerons)
EFLR7150 37-gram Standard Servo
(used on rudder)
Introduction
E-flite’s Apprentice 15e Plug-N-Play is a 15-size ™ ™
high-wing club trainer that comes with nearly
everything you need to go from purchase to the flying
field. No building required—just charge and install
your battery, mount the wing and tail surfaces and
fly by utilizing your own transmitter and receiver.
The Apprentice is made from durable, lightweight
Z-Foam , making it tough enough to handle the ™
punishment of early training mishaps without getting
bent out of shape. When using the recommended
E-fliteÂŽ 11.1V 3200mAh battery, you can expect
extended flight times of 15 minutes or more.
The Apprentice is the perfect training aircraft thanks
to its gentle flight characteristics. Once the pilot has
learned the basics of flight, the Apprentice is capable
of performing loops, rolls, inverted flying and other
aerobatic maneuvers. It’s also equipped with tricycle
landing gear for better ground handling.
Learn to fly the basics and beyond with E-flite’s
Apprentice PNP.
Important Warranty Information
Please read our Warranty and Liability Limitations
section on Page 22 before building this product. If you
as the Purchaser or user are not prepared to accept the
liability associated with the use of this Product, you are
advised to return this Product immediately in new and
unused condition to the place of purchase.
Using the Manual
This manual is divided into sections to help make
assembly easier to understand, and to provide breaks
between each major section. In addition, check boxes
have been placed next to each step to keep track
of its completion. Steps with a single circle ( ) are 
performed once, while steps with two circles ( )  
indicate that the step will require repeating, such as for
a right or left wing panel, two servos, etc.
Remember to take your time and follow the directions.
Table of Contents
Introduction ........................................................... 2
Important Warranty Information .............................. 2
Using the Manual ................................................... 2
Product Registration................................................ 2
Contents of Kit/Parts Layout .................................... 2
Required Radio Equipment ...................................... 3
Battery .................................................................. 3
Charger ................................................................ 3
Required Tools and Adhesives ................................. 3
Optional Accessories .............................................. 3
Note on Lithium Polymer Batteries ........................... 3
Charging the Flight Battery ..................................... 3
AR500 Receiver Installation .................................... 3
AR6200 Receiver Installation .................................. 4
Tail Installation ....................................................... 4
Landing Gear Installation ........................................ 6
Wing Installation .................................................... 6
Battery Installation .................................................. 9
Removing the Propeller ......................................... 10
Control Functions ................................................. 12
Centering the Control Surfaces and
Checking Control Direction .............................. 12
Reversing Direction of Flight Controls ..................... 17
Center of Gravity ................................................. 17
Range Test Your Radio .......................................... 18
Setting the Control Throws .................................... 18
Installing the Propeller .......................................... 20
Flying Your Apprentice ......................................... 22
Safety Precautions ................................................ 22
Safety Do’s and Don’ts for Pilots ............................ 22
Warranty Information ........................................... 22
CE Compliance Information for the
European Union .............................................. 24
2009 Official Academy of
Model Aeronautics Safety Code ....................... 24
Declaration of Conformity ..................................... 26
The Spektrum trademark is used with permission
of Bachmann Industries, Inc.
3E-flite Apprentice PNP Assembly Manual
Required Radio Equipment
The Apprentice PNP requires a 4-channel transmitter
and full-range receiver. Users of Spektrum’s DX5e
2.4GHz radio system will need an AR500 5-channel
receiver (SPMAR500).
Complete Radio System
SPM5500 DX5e 5-Channel Full Range
w/o Servos
Or Purchase Separately
SPMAR500 AR500 5-Channel Receiver
Or
SPMAR6200 AR6200 6-Channel Ultralite
Receiver
Battery
EFLB1040 11.1V 3200mAh 15C
3-Cell Li-Po, 13AWG w/EC3
Or
EFLB32003S 11.1V 3200mAh 20C
3-Cell Li-Po, 13AWG w/EC3
Or
THP33003SXV 11.1V 3300mAh 25C
3-Cell Extreme V2 Li-Po
Charger
EFLC505 1-5 Cell Li-Po Charger
w/Balancer
Or
THP610 610C 1-6 Cell Li-Po 0.25-10A
DC Charger w/Balancer
Optional
THP1205P AC-12V DC, 5A Power Supply
Required Tools and Adhesives
Tools & Equipment
EFLA250 Parkflyer Tool Assortment,
5-piece
Or Purchase Separately
Adjustable wrench Ruler
30-minute epoxy Mixing cup
Mixing sticks Epoxy brush
Paper towel Rubbing alcohol
Low-take tape
Phillips screwdriver: #1
Optional Accessories
EFLA110 Power Meter
EFLP11080E 11x8 Electric Prop
EFLA208 Foam CA 1oz/
Activator 2oz Pack
SPM6805 Trainer Cord
Note on Lithium Polymer Batteries
Lithium Polymer batteries are significantly
more volatile than alkaline or Ni-Cd/
Ni-MH batteries used in RC applications.
All manufacturer’s instructions and warnings
must be followed closely. Mishandling of LiPo
batteries can result in fire. Always follow the
manufacturer’s instructions when disposing of
Lithium Polymer batteries.
Charging the Flight Battery
You will want to begin charging your battery so
it is ready once the model is complete. Follow the
instructions included with your charger and battery.
AR500 Receiver Installation
Required Parts
Fuselage assembly Hook and loop tape
AR500 receiver Clear tape
 1. Attach a piece of hook and loop tape to the
back of the receiver. Insert the receiver into the
pre-formed pocket in the fuselage as shown.
Make sure to route and secure the antenna as
shown in the photos below. Once you have the
antenna routed correctly, secure it in place with
a piece of clear tape.
Clear Tape
 2. Plug the leads from the speed control, rudder
servo and elevator servo into the appropriate ports
of the receiver. Note the rudder servo is larger, and
the elevator servo is smaller.


Product specificaties

Merk: E-flite
Categorie: Speelgoed
Model: Apprentice 15e PNP

Heb je hulp nodig?

Als je hulp nodig hebt met E-flite Apprentice 15e PNP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speelgoed E-flite

Handleiding Speelgoed

Nieuwste handleidingen voor Speelgoed