Dyson DC03 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Dyson DC03 (6 pagina's) in de categorie Stofzuiger. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
DYSON CUSTOMER HELPLINE
0990 275104
DCO3 Operating Manual
8am to 8pm, 7 DAYS A WEEK
Wand
Shroud
Adaptive
Brush
Control
Cover cap/
storage hook
Cable winder
Hose
Blockage removal
cassette
Bin release catch
Fit tools to hose
for car cleaning
Push button to release
or replace wand
On/off
switch
Tool location
Lower cable winder
Wand
release catch
Post-motor filter
Twist ring
Quick release
window
Bin inner
Cyclone
assembly
Cyclone
release catch
Blockage removal
cassette catch
DCO3 quick reference page
Carrying handle
brush OFF for use on delicate rugs and floors.
Manually select/de-select Neutral.
brush OFF for when the cleaner is left running in
the upright position and when the hose is in use.
brush ON for normal carpet cleaning.
N E U T R A L
PA R K
D R I V E
The Adaptive Brush Control is a simple device to allow cleaning of hard floors
by switching off the brushbar. The height adjusts automatically.
Adaptive Brush Control
THE SAFETY ALERT RATCHET NOISE WARNS THAT THE BRUSHBAR IS OBSTRUCTED
N
P
D
M
A
N
U
A
L
Pre-motor filter
Soleplate
Filters and blockages
Rotate twist ring to the left to release
filter case.
Remove filter case from machine body.
1
2
1234
34
Lift out pre-filter using handle
(replace at least every 12 months).
Remove wand from hose and look
down the wand to check for daylight.
Locate blockage removal cassette catch
at base of hose location.
2
Pull back catch, remove cassette and
check for blockage. To replace, position
at 450 and click catch back into place.
Remove Cyclone assembly to check
Cyclone entry and duct.
2
4
Using a coin, undo the yellow fastener
to remove the quick release window.
Check for blockage at the bottom of the
duct and underneath the soleplate.
1
Ensure the pre-filter is changed regularly. If filters block, the cleaner may overheat and cut out. The Dyson DC03 has a built in
motor protection thermostat to protect the appliance in the event of a restriction to airflow. Unplug cleaner. Leave for 30 minutes.
Fit a new pre-filter before use.
14
Pre-motor filter
Post-motor filter
3
Replace filter case and rotate twist ring
down and to the right to secure.
DYSON CUSTOMER HELPLINE: 0990 275104
8am to 8pm, 7 days a week
Cyclone entry
Blockage removal
cassette catch
duct
NB If the cleaner
is still blocked lift
out the post-filter
and check inside
for dust caking.
3


Product specificaties

Merk: Dyson
Categorie: Stofzuiger
Model: DC03

Heb je hulp nodig?

Als je hulp nodig hebt met Dyson DC03 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Stofzuiger Dyson

Handleiding Stofzuiger

Nieuwste handleidingen voor Stofzuiger