Dynaudio Xeo 2 Wall Mount Bracket Handleiding

Bekijk gratis de handleiding van Dynaudio Xeo 2 Wall Mount Bracket (2 pagina’s), behorend tot de categorie luidsprekersteun. Deze gids werd als nuttig beoordeeld door 100 mensen en kreeg gemiddeld 4.8 sterren uit 4 reviews. Heb je een vraag over Dynaudio Xeo 2 Wall Mount Bracket of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Owners Manual Wall Mount Bracket

Introduction

We thank you for choosing this quality wall-mount bracket which has been designed to work particularly well with the Dynaudio

compact loudspeaker models. The bracket has been designed to provide a very rigid and stable support, thus allowing the

speaker(s) to perform at optimum levels in a wide variety of positions. The unique curved shape adds strength to the mounting

assembly while also offering the exibility of both vertical and horizontal adjustment capabilities. Therefore the loudspeaker(s)

may be precisely angled to obtain the optimum listening axis in any room. The speakers will be mounted in place at a distance

within 6 cm of the wall boundary, and the mounting bracket will essentially be hidden behind the speaker cabinet.

Mounting surfaces

WARNING

Carefully evaluate the composition, construction and strength of the sur face you are mounting to. Take care to avoid concealed

water (plumbing) and power (electric) supplies which may be located behind the desired mounting location(s).

Tools required

Spirit level

Power Drill

3 mm masonry drill bit

No2 Pozidriv screwdriver

Assembly/Installation

Before assembly you should check that the hardware kit

is complete. A complete kit consists of the following:

4 curved steel plates

8 wood screws

2 washers

1 wrench

2 bolts

2 nuts

First put the bold and the plain washer through the slot of the smaller curved plate. Then, screw the nut ush onto the bolt,

as shown in the picture at the right.

Next, drill the holes and attach the smaller plate concentric onto the speaker cabinet. The holes should measure 3mm in

diameter but shouldn’t be deeper than 15mm to prevent the screws of breaking through into the cabinet enclosure.

NOTE

Sometimes it is helpful to connect the loudspeaker cable before completing the assembly. The mounting bracket plate could be

positioned right above the terminals of the speaker(s).

Examples

Audience 42

Audience 42WAudience 42C

Audience 52

Product specificaties