Dynatrap DT150-DEC2 Handleiding

Bekijk gratis de handleiding van Dynatrap DT150-DEC2 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.1 sterren uit 2 reviews. Heb je een vraag over Dynatrap DT150-DEC2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

LIMITED WARRANTY

PARTS & ACCESSORIES AVAILABLE

PART DESCRIPTION

4166-DT150 Power Supply

A000-399.6

DYNAMIC warranties to the original purcher that this product is free om deftive materials and asfrec

workmanship. This warrantys mited toedy any deftive partor a period of one year om date of ili remec ffr

orinal date of purchase. Retain your original receipt as proof of purche. This warranty does not apply gias

to the light bb, nor to, in our jgnt, misuse orbuse. If this unit has been alteuludme a

red, no warranty isn i

force. This warranty In no case shall DYNAMIC applies only if sold by authorized DYNAMIC distributors.

be liable for any accident, pitive, consequei, or any other damages of any kind for breach of this alunntal

or any other warranty, expressed or implied, whatsoever. Some states do not low limitation on how al

long an implied warranty lts, so the above limitation or exclusion may not aly to you. This warranty aspp

gives you specific legal rights, and you may also have other rights that vary from stattstate.e o

ProblemPossCorrect:i:ble causeion:

Bulbs d not iolluminate

and foo.an des nt spin

1. Ncal powolec etrier1. Check plug and receptacle and fuse or circuit breaker.

2. Check to make sure the power supply is connected

firmly on top of the unit.

Bulb is, bu falluminatetn

dot.es no spin

1. Shored faG UNItn1. UNPLUT: Examne fan o see that it is fee fritrom

foirroregn mateial, dit r buld-up oad inscts. Clean unit aife des

”t.in “CLEANING secion

Fan spins, but bub doels

noillit umnate

1. Burn1.t obut bul Call Dynatrap customer service at 877-403-8727

TROUBLESHOOTING

This product may be covered by one or more U.S. patents

or pending patent applications. See www.dynatrap.com/patents

IORTANT SAFETY INSTRUCTMPIONS

OWNER’S MUALAN

MODEL: DT150-DEC2

Thank you

for purchasing this

DYNATRAP

®

Insect Trap!

Please read these instructions before using the DynaTrap

®

Insect Trap and keep for future reference.

1. Always turn unit off and disconnect plug before servicing, cleaning, or changing bulb.

2. Do not position the unit near heat, gas, oil or other flammable materials.

3. Mount product out of reach from children.

4. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or

damaged, or if it has been dropped into water.

5. Do not insert fingers or any foreign objects into the unit while it is connected to an electrical outlet.

6. Collected insects within the unit may contribute to fire, so clean insects from the unit frequently.

7. Do not clean this product with water spray. Do not place where it can fall into water, or near flammable materials.

8. Do not touch fan while in motion.

9. Do not abuse cord—never carry or hang unit by cord or yank it to disconnect from receptacle. Keep cord away from heat,

oil, or sharp edges.

10. Use only extension cords that are clearly marked "Suitable for Use with Outdoor Appliances" and that have plug and

receptacles that match the product plug. Replace all damaged cords.

11. Only use attachments recommended or sold by the manufacturer.

12. Do not use outdoors.

WARNING, When using electric appliances, basic precautions should always be followed, including the following:

– To disconnect, turn all controls to the off (“O”) position, then remove plug from outlet.

– Unplug from outlet when not in use and before servicing or cleaning.

– To reduce the risk of electrical shock, do not put appliance in water or other liquid.

– This appliance is provided with double insulation. Use only identical replacement parts.

CAUTION: To reduce the risk of injury from moving parts, unplug before servicing.

WARNING: Risk of Electric Shock.

See instructions for Servicing of Double-Insulated Appliances.

In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided

on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing of a double-insulated

appliance requires extreme care and knowledge of the system, and should be done only by qualified service personnel.

Replacement parts for a double-insulated appliance must be identical to those parts in the appliance.

INSTRUCTIONS FOR DOUBLE-INSULATED, CORD-CONNECTED APPLIANCES:

IMPORTANT SAFETY INSTRUCTIONS

13. SERVICING OF DOUBLE-INSULATED APPLIANCES - In a double-insulated appliance, two systems of insulation are provided

instead of grounding. No grounding means is provided on a doubleinsulated appliance, nor should a means for grounding

be added to the appliance. Servicing of a double-insulated appliance requires extreme care and knowledge of the system,

and should be done only by qualified service personnel. Replacement parts for a double-insulated appliance must be

identical to those parts in the appliance. A double-insulated appliance is

marked with the words “DOUBLE INSULATION” or “DOUBLE INSULATED.” The symbol

IMPORTANT SAFETY INSTRUCTIONS

Dynamic Solutions Worldwide, LLC

12247 W. Fairview Ave. Milwaukee, WI 53226

Phone: 414-431-2819

Toll free: 1-877-403-TRAP (8727)

Toll free fax: 877-403-3293

Email: [email protected]

Visit us online at www.dynatrap.com

© s , Dynic SolutionamWorlidedwLLC

SAVE THESE INSTRUCTNSIO

USER-MAINTENANCE INSTRUCTIONS - CLEANING

Frequent cleaning will prolong the life of the unit, ensure fire prevention and provide for more efficient operation.

1. Be sure to clean the unit at least once per week.

2. To clean, grasp the top of the unit and twist the unit to the “CLOSE” position and unplug the unit.

3. For weekly cleaning, remove the cage by turning it clockwise. Remove any buildup from the inside of the retaining cage and

fan with a brush.

4. When replacing the retaining cage – DO NOT press/push against the screen windows.

INSTALLATION & OPERATING INSTRUCTNSIO

1. Unpack Unit. Save carton for off-season storage (if needed).

2. Plug cord into an outlet or UL listed extension cord as described in

“IMPORTANT SAFETY INSTRUCTIONS”.

3. Grasp the top of the unit and twist the unit to the “OPEN” position.

4. Catch rate activity will be higher at night. For best catch results it

is recommended to keep the unit away from competing light

sources. Intended for household use only.

HOW THE DYNATRAP

®

INSECT TRAP WORKS

Flying insects are attracted to the unit by the UV light and CO

2

that is generated by the photo-catalysis between the UV lamps

and the special TiO

2

coating. The fan then pulls the insects into

the screened base, trapping them until they dehydrate and

die. The base can be removed, allowing the contents to be

periodically emptied into the trash. The see-through screen

shows the insects trapped in the compartment, alerting you

when the cage needs to be emptied.

FOR

INDOOR USE

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS

For Household

Use Only

This device complies with

Performance Standards for

Light-Emitting Products, 21 DFR,

Part 1040, Chapter 1,

Subchapter J, Radiological Health.

TiO2 COATED

SURFACE

FAN

RETAINING

CAGE

UV

BULB

Product specificaties