Durkopp Adler 550-12-12 Handleiding

Durkopp Adler Naaimachine 550-12-12

Lees hieronder de 📖 handleiding in het Nederlandse voor Durkopp Adler 550-12-12 (14 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
Contents Page:
Preface and General Safety Notes
Part 1: Operating Instructions Cl. 550-12-12
1. Product Description
1.1 Short Description and Proper Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.2 Optional Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.3 Technical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2. Operation
2.1 Threading the Needle Thread (Upper Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.2 Threading the Hook Thread (Lower Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.3 Thread Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.4 Upper Thread Quantity for Sure Stitch Formation . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.5 Optional Equipment reinforcing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.5.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.5.2 Optional Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.5.3 Operating Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.5.4 Loading the reinforcement tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.5.5 Adjustments on the tape unwinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.5.6 Replacing the presser foot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3. Maintenance
3.1 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.2 Lubricating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Home
1.3 Technical Specification
Machine head: Class 935 - 940 - 6
Needle system: 934 SIN
Needle thickness: Nm 90
Threads: As needle and hook thread spun monofilament
sewing yarns
Stitch type: 401 double chain stitch
Number of stitches: 3200 / min (recommended number of stitches
ex works)
Stitch length: 2.5 mm for rear feed dog (fixed setting)
Transport length for forward feed dog and
transport foot adjustable up to 6 mm
Stitch condensation: 1.5 mm
Operating pressure: 6 bar
Air consumption: approx. 0.5 NL per work cycle
Nominal voltage: 1 x 220 - 240 V, 50 / 60 Hz
Dimensions: (H x W x D) 1600 x 1530 x 951 mm
2. Operation
2.1 Threading the Needle Thread (Upper thread)
Caution Risk of Injury !
Turn main switch off.
Thread the upper thread only with the machine switched off.
–Place the thread spool 1 on the thread stand.
–Guide the thread as shown through the holes and tension discs in
the thread guide plate.
–Guide the thread in order through guide plate 3, thread guide 4,
thread tension 8, thread guide 6 and thread drawing plate 7.
–Guide the thread through thread guide 13 and thread drawing lever
12.
–Guide the thread through pre-tension 9, thread guide 10 and
needle eye. Cut off the excess thread end.
2.2 Threading the Hook Thread (Lower Thread)
Caution Risk of Injury !
Turn main switch off.
Thread the lower thread only with the machine switched off.
–Place the thread spool 2 on the thread stand.
–Guide the thread as shown through the holes and tension discs in
the thread guide plate.
–Guide the thread in order through the guide plate 3, thread guide
4, thread tension 5 and lower thread guide 19.
–Feed the thread through the slot (see arrow) in the thread gutter 18.
–Remove cover plate 11 and swing holder 14 up out of its catch.
Guide the thread through thread guides 15 and thread drawing
hook 16.
Swing holder 14 back and allow to catch.
–Pull the thread through the hook 17 with a tweezers and pull tight.
Insert cover plate 11 again.
6

Product specificaties

Merk: Durkopp Adler
Categorie: Naaimachine
Model: 550-12-12

Heb je hulp nodig?

Als je hulp nodig hebt met Durkopp Adler 550-12-12 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Naaimachine Durkopp Adler

Durkopp Adler

Durkopp Adler 743-221-01 Handleiding

16 April 2024
Durkopp Adler

Durkopp Adler 2112-7 Handleiding

18 December 2023
Durkopp Adler

Durkopp Adler 1967 Handleiding

20 Maart 2023
Durkopp Adler

Durkopp Adler 1365-5 Handleiding

20 Maart 2023
Durkopp Adler

Durkopp Adler D669 e-con Handleiding

30 Juni 2023
Durkopp Adler

Durkopp Adler 251-140042 Handleiding

20 Maart 2023
Durkopp Adler

Durkopp Adler 267 - 2016 Handleiding

20 Maart 2023
Durkopp Adler

Durkopp Adler 579 Handleiding

8 Juni 2023
Durkopp Adler

Durkopp Adler 4181i-3 Handleiding

20 Maart 2023
Durkopp Adler

Durkopp Adler 670 Handleiding

4 Juni 2023

Handleiding Naaimachine

Nieuwste handleidingen voor Naaimachine

Husqvarna-Viking

Husqvarna-Viking Hiclass E20 Handleiding

25 April 2024
Husqvarna-Viking

Husqvarna-Viking Eden Rose 250C Handleiding

25 April 2024
Singer

Singer SO235 Handleiding

25 April 2024
Husqvarna-Viking

Husqvarna-Viking Hiclass E10 Handleiding

25 April 2024
Husqvarna-Viking

Husqvarna-Viking Eden Rose 250M Handleiding

25 April 2024
Husqvarna-Viking

Husqvarna-Viking Huskylock 90 Handleiding

25 April 2024
Pfaff

Pfaff Hobbylock 4763 Handleiding

25 April 2024
Husqvarna-Viking

Husqvarna-Viking Metal Hoop 180-130mm Handleiding

25 April 2024
Husqvarna-Viking

Husqvarna-Viking Huskylock s15 Handleiding

25 April 2024
Husqvarna-Viking

Husqvarna-Viking Amber Air S600 Handleiding

25 April 2024