Dual MH200 Handleiding
Dual
Niet gecategoriseerd
MH200
Bekijk gratis de handleiding van Dual MH200 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 33 mensen en kreeg gemiddeld 4.9 sterren uit 17 reviews. Heb je een vraag over Dual MH200 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
INSTALLATION/OWNER'S MANUAL
Universal Marine Gimbal Housing
MH200
2
Protect your marine head unit from damage and the harsh marine environment with the
MH200 gimbal housing. This marine grade housing fits most single DIN size head units
and provides full protection against splashes and debris.
Before You Start
• Disconnect negative battery terminal. Consult a qualified marine technician or service
manual for instructions.
• Due to differences in head units, it is recommended to temporarily mount head unit in
the gimbal housing before installation to ensure the cover will close properly.
• Use extreme caution when drilling holes to avoid damaging fuel lines or existing wiring.
Mounting Bracket Dimensions
Opening and Closing the Gimbal Housing
• Press the release button on top to open the cover and access the head unit.
• To close, fold the cover up and press until it clicks into place.
MH200 INSTALLATION
Preparation
Release Button
3
Mounting
• Prepare surface for mounting the gimbal housing bracket. For maximum installation
flexibility, the gimbal housing bracket can be mounted to any flat surface or it can also
be suspended.
• Use the bracket as a template and mark and drill the holes for the mounting bracket.
Use caution before you drill or cut! Be careful not to cut or drill into gas tanks, fuel lines,
hydraulic lines, vacuum lines or electrical wiring.
• Secure the mounting bracket using supplied hardware. Attach gimbal housing by
inserting the thumbscrews through the bracket and into the gimbal housing. Adjust the
desired angle and hand tighten the thumbscrews. Do not overtighten the thumbscrews.
• Route all head unit wiring to the gimbal housing. Using a suitable tool, carefully cut an
"X" in the desired rubber grommet. The grommets are interchangeable between the left
and right sides of the gimbal housing.
• Install mounting sleeve (supplied with head unit) into gimbal housing. This may vary
depending on head unit manufacturer and installation instructions. Refer to head unit
owner’s manual for details.
• Connect head unit wiring and test for correct operation.
MH200 INSTALLATION
Mounting
TYPICAL MOUNTING
*Head Unit not included.
Product specificaties
| Merk: | Dual |
| Categorie: | Niet gecategoriseerd |
| Model: | MH200 |
Heb je hulp nodig?
Als je hulp nodig hebt met Dual MH200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Dual
30 Januari 2025
30 Januari 2025
30 Januari 2025
30 Januari 2025
8 November 2024
7 November 2024
7 November 2024
7 November 2024
7 November 2024
7 November 2024
Handleiding Niet gecategoriseerd
- Berner
- Genki Instruments
- Rival
- Troy-Bilt
- Gelid
- Clean Paper
- Tommee Tippee
- Panasonic
- Pieps
- Pfaff
- Moman
- Walther
- Shuttle
- Friedland
- Masport
Nieuwste handleidingen voor Niet gecategoriseerd
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025