Drift Ghost 4K+ Handleiding

Bekijk gratis de handleiding van Drift Ghost 4K+ (2 pagina’s), behorend tot de categorie Sportscam. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.9 sterren uit 3 reviews. Heb je een vraag over Drift Ghost 4K+ of wil je andere gebruikers van dit product iets vragen? Stel een vraag

-1--2---4---6---8---3-5-7-9

About Your CameraPackage Contents

Getting Started

Initial Setup

1. Uncover the microSD slot by lifting its rubber cover.

2. Insert a Class 10 or higher microSD/HC/ card (up XC

to 128GB).

Format before fi rst usage!

3. Uncover the mini USB port by lifting its rubber cover

4. Connect the camera via a mini USB cable to a

powed USB port, re

and charge the battery for 2.5 hours before fi rst use.

5. Replace the rubber covers securely to cover both

the microSD slot and mini USB port. u are ready Yo

to go!

4

3

12

5

POWER ON/OFF

1. Press and hold the button to power on.

2. The Rear Screen will power on, showing the

welcome display.

3. The camera is now ready to record video or take photos.

4. Current camera mode is indicated by the colour of

the Status LED and

Rear Screen, along with the icon in the top left of the

Rear Screen.

5. To power o , press and hold the button for 3

seconds.

2

4

MODE NAVIGATION

To change the current camera cording mode, re

press the button; changing between Video, Photo,

Timelapse, Photoburst, and General Settings modes.

RESET YOUR CAMERA

When Ghost 4K+ doesn’t response properly, you can

press and hold the “Power” button for 20s to reset it.

Mode Icon

Came ModesSettings Menura

SETTINGS MENU NAVIGATION

1. On arrival to the settings menu, the highlight black

box rests on the top, highlighting the Settings Menu

icon as the starting position.

2. Press the button to navigate down, this

highlights the next setting.

Press hold the button to scroll upwards.

3. Press the button to change the option for that

setting.

4. At any time, press the button to change mode

(returning to Video).

4

1

2

3

In this example pressing once moves highlight block

to the next setting (Field of View), pressing once more

moves to Exposure.

In step 3 pressing

changed FOV 140° to 115°.

Settings

Speaolumker Ve

LED Ss Itatundicator

Indicator Timer

Instant Rdecor

Video Sdtandar

Date

Date Stamp

Default Start-Up Meod

Camera O

THM Files

Language

Reset Ssetting

Format SD Cdar

Serial Nrumbe

Clone Meod

Clone Group

Firmware Version

*Check r ouo cial r website fofi rmware updates.

OFF / LOW / MED / H IGH

OFF / ON

OFF / 5s / 10s / 20s / 1m

OFF / ON

ALALL / NC / PTS / CINEMATIC

YY/MM/DD HHm/m

OFF / ON

RESUME LT SN / VO / PHASESSIOIDEOTO /

TIMELAPSE / PHOTOBURST

NEVER / 2MIN / 5MIN / 10MIN / 20MIN

ON / OFF

EN / DE / FR / IT / ES / CN

YES / NO

YES / NO

XXXXXX

O / Mr / Sastelave

0 / 1 / 2 / 3 / 4 / 5

XXXXXX

Wi-Fi

Wi-Fi Frequency

DVKit

BT Cr Ahleaut

Field of View

Exposure

Self Timer

Bit Reat

Filters

ISensitiviO Sty

Video Tagging

Video Tagging Ilnterva

Car DVR

Car DVR Lp Iloonterva

Video Stabilization

Microphone

Mic Sensitivity

OFF / ON

2.4 / 5.8 GHz

OFF / ON

YES / NO

90° / 1° / 1°1540

-2 / -1 / 0 / +1 / +2

OFF / 3S / 5S / 10S

HIGH / MM / LEDIUOW

NORMIVIIGHAL / VD / LOW LT / WATER

100 / 200 / 400 / 800 / AOUT

OFF / ON

10S / 30S / 1N / 2NMIMI

OFF / ON

10S / 30S / 1N / 2N / 5N / 1MIMIMI0MIN

OFF / ON

FRONT / RREA

OFF / 1 / 2 / 3 / 4 / 5

AB

I

CDE

G

J

F

N

H

MKL

Rear Button

Status DLE

Module Latch

Wi-Fi DLE

Rear Screen

MicroSD Ca Slotrd

Middle Butnto

Rotating Lens

Dual microphones

10 Pin Mini USB Port

Rubber Cover

Front Button

Battery Module

Reset Button

A

D

G

H

I

L

B

E

J

M

C

F

K

N

Ghost 4K+ Camera

Universal Clip

Curved Adhesive Mount

External Microphone

USB-Mic Coerternv

MiniUSB Cable

Reset Tool

A

D

F

B

E

G

C

A

C

B

D

F

E

G

VIDEO MODE

(Green LED) Press the button to start recording. The Status

LED and LCD backlight will fl ash red to indicate recording. Press

the button again to stop recording.

VIDEO SETTINGS

• Resolution

• Frame Rate

PHOTO MODE

(Yellow LED) The camera will capture still images when the

button is pressed, and the status LED and LCD screen will fl ash red

each time a photo is captured.

PHO SETTINGSOT

• Resolution

CHANGE SETTINGS

In any mode press the button to highlight a setting.

Press the button to change the option for the

highlighted setting.

TIMELAPSE MODE

(Purple LED) Press the button to capture a series of still

images at a specifi ed rate. The Status LED and LCD screen will fl ash

red each time an image is captured. stop cording, press the Tore

button once more.

TIMELAPSE SETTINGS

• Resolution

• Timelapse Interval

PHOTOBURST MODE

(Cyan LED) The camera will capture a burst of still images for an

allotted duration and at a specifi ed rate, when the button

is pressed. For best results, use a memory card with the highest

possible data rate.

PHOBURST SETTINGSOT

• Resolution

• Burst Duration/Capture Rate

GHOST 4K

Quick Guide

Thank you for purchasing the Drift Ghost 4K+

CUSTOMER SUPPORT

Download the full manual and check our o cial

website for fi rmware updates, customer support,

and info on all of our products.

https://driftinnovation.com/

If you have any suggestions, comments or concerns;

please contact our customer support team at:

[email protected]

WARRANTY

Warranty does not apply if the product is damaged

due abuse, mishandling, accident, fito physical re,

frostbite, damage, negligence or failure water to

follow the supplied operating instructions. For

mo information on your warrant see:rey,

https://driftinnovation.com/warranty

About Your Camera | ckage ContentsPa

Initial Setup | Getting Started

Came Modesra

Settings Menu

Settings

Mounting the Camera

Featurviewe Over

Accessory Guide

Wi-Fi + Firaremw

Connecting Your Camera

Specifi cations

Disclosures

2-3

4-5

6

7

8

9

10-11

12

13

14

15-16

17-19

Contents

Mounting the Camera

1. Attach the Universal Clip to the camera in any

360° orientation as needed – fi rst position the clip

in the desired orientation, then secure by rotating

the screw base by hand.

2. Slide the Universal Clip into your chosen mount,

ensuring that it ‘clicks’ into place. *Double check

it has been fully inserted by pushing out the

clips.

3. Align your shot. Rotate the lens by hand, using

the lens marker as an ‘up’ ference, mantaining re

it perpendicular to the ground for correct

orientation.

Lens Marker

Product specificaties