Dreamgear i.Sound 4X Glow Universal Handleiding

Dreamgear Cradle/docking station i.Sound 4X Glow Universal

Lees hieronder de 📖 handleiding in het Nederlandse voor Dreamgear i.Sound 4X Glow Universal (1 pagina's) in de categorie Cradle/docking station. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

PO B o x 4 7 8

Torrance, CA 90508

Additional 4X Glow Features:

1. The 4X Glow speaker features an extra audio input

for connecting additional audio devices. The 4X Glow

is compaitble with any portable audio device that features

a standard headphone jack.

2. To connect an alternative audio device, connect the included

audio cable to the audio input (located on the right side of the

4X Glow’s speaker casing) and the other end to the headphone

input of your audio device. Volume levels are always controlled

by using volume control of the audio device in use.

Troubleshooting:

Problem: No sound is coming from the 4X Glow speaker?

Solution: Make sure the speaker and the audio device is powered

on.

Solution: Confirm the volume on the audio device is turned up.

Solution: Make sure the speaker is connected to a wall outlet.

Solution: If using batteries, confirm the batteries are not drained.

Problem: Sound quality is poor or maximum volume is not

satisfactory.

Solution: If using batteries, confirm the batteries are not drained.

When the batteries start to lose power you will experience loss of

sound quality and batteries should be replaced.

Contents

~ 4X Glow

~ AC Adapter

~ Audio Cable

i.Sound™ 4X Glow Set-up:

1. Remove the speaker from the packaging.

2. To power the 4X Glow using batteries, remove the battery door

located on the back of the 4X Glow and insert 4 “AA” batteries.

3. To power the 4X Glow using the included AC adapter, plug one

end into the DC 9.V input on the left side of the 4X Glow speaker

and the other end into a standard wall outlet.

4. Open the 4X Glow’s protective cover by pulling downward on the

cover, slide your iPod® nano downward between the 4X Glow’s

Speakers, so that the extended audio pin fits into the audio input

opening on the bottom of the iPod® nano.

5. Power on the 4X Glow by switching the Speaker power

button (located on the back of the Speaker Tower) to the “ON”

position. A blue LED will indicate the speaker is powered on.

6. Power on your iPod® nano and adjust the volume to a

desired level. Speaker volume can only be adjusted

by using the iPod® nano’s volume control.

7. To ensure you are experiencing the best sound quality

make sure your audio devices internal equalizer is set to

the proper setting.

8. The 4X Glow features a unique GLOWING effect that can

be turned on and off by switching the button LED power

(located on the back of the 4X Glow) to the “ON” or “OFF

position as desired.

9. When the Speaker Tower is not in use, switch the power

to the “OFF” position.

NOTE: Sound quality will decrease as the battery life

decreases. If sound quality decreases replace the

batteries or use the included AC adapter.

FOR TECHNICAL SUPPORT

PLEASE CONTACT:

1-877-999-DREAM

or visit us @

www.dreamgear.net

www.isoundusa.com

4X Universal

Product specificaties

Merk:	Dreamgear
Categorie:	Cradle/docking station
Model:	i.Sound 4X Glow Universal
Kleur van het product:	Wit
LED-indicatoren:	Stroom
Inclusief AC-adapter:	Ja
Audio-uitgangskanalen:	4.0 kanalen
Compatibele producten:	iPod
Afstandsbediening inbegrepen:	Ja
AC-ingangsspanning:	110 - 240 V