Draper Storm Force 83660 Handleiding
Draper
Hittepistool
Storm Force 83660
Lees hieronder de 📖 handleiding in het Nederlandse voor Draper Storm Force 83660 (8 pagina's) in de categorie Hittepistool. Deze handleiding was nuttig voor 6 personen en werd door 3.5 gebruikers gemiddeld met 4.9 sterren beoordeeld
Pagina 1/8

83660
EN
Original Instructions
Version 2 – October 2024
83660
230V
GLUE GUN

EN
Read this manual in full before using this
product and retain it for future use.
Always use the latest version of the manual.
Please visit for drapertools.com/manuals
the latest version.
1. Intended Use
This glue gun is supplied with six general
purpose glue sticks and is designed for DIY
and craft applications.
Any other application beyond the conditions
established for use will be considered misuse.
Draper Tools accepts no responsibility for
improper use of this product.
This product is intended for domestic and
infrequent light-duty trade use.
1.1 Explanation of Symbols
Read the instruction manual
Warning!/Caution!
Class II construction
(Double insulated)
WEEE – Waste Electrical &
Electronic Equipment
Do not dispose of Waste Electrical &
Electronic Equipment in with
domestic rubbish
UK Conformity Assessed
European conformity
2. Specication
Stock No. 83660
Part No. PT65SF
Rated Voltage 230V/50Hz
Rated Input 100W
Temperature 0 – 180°C
Glue Stick
(diameter x length)
11.2 x 100mm
Net Weight (glue gun only) 270g
3. Health and Safety Information
Important: Read all the Health and Safety
instructions before operating or maintaining
this product and retain for later use. Failure
to follow these instructions may result in
injury or damage to the user, the product or
the workpiece.
3.1 General Health and Safety Instructions
•  DO NOT touch the nozzle area when hot.
WARNING! The glue gun must be
placed on its stand when not in use.
•  Keep away from sources of ignition.
•  DO NOT leave the gun unattended when
switched on.
•  ALWAYS unplug from the wall socket
when not in use.
•  NEVER put any other objects in the
gun other than the recommended
glue sticks.
•  NEVER remove a glue stick once it has
been inserted into the gun; the resulting
damage may be unrepairable.
•  Keep out of the reach of children.
•  Children should be supervised to ensure
that they do not play with the product.
– 2 –

•  DO NOT abuse the cord. Never use the
cord for carrying, pulling or unplugging
the tool. Keep the cord away from heat,
oil or moving parts. Damaged or
entangled cords increase the risk of
electric shock.
•  Wear appropriate PPE (Personal
Protective Equipment).
WARNING!
Avoid contact with hot glue:
 − If contact with skin - DO NOT
remove the glue, immerse burn in
water and seek medical advice.
•  In case of contact with eyes – rinse
immediately with plenty of water and
seek medical advice.
•  DO NOT use the glue gun in damp or wet
conditions. expose to rain.DO NOT
•  Unplug and allow the glue gun to cool
completely before changing the glue
sticks, after use and before storing away.
•  Always check the glue gun, cord and
plug before use. If damaged have
the tool repaired by a qualied
specialist using only recommended
replacement parts.
3.2 Connection to the Power Supply
CAUTION! Risk of electric shock.
DO NOT open.
This appliance is supplied with an approved
plug and cord for your safety.
If the power supply cord is damaged, it must
be replaced by Draper Tools, an authorised
service agent or similarly qualied
personnel in order to avoid a hazard.
The damaged or incomplete plug, when cut
from the cord, shall be disabled to prevent
connection to a live electrical outlet.
This appliance is a Class II†and is designed
for connection to a power supply matching
that detailed on the rating label and
compatible with the plug tted.
The value of the fuse tted is marked on the
pin face of the plug. Should the fuse need
replacing, use a small plain-slot screwdriver
to remove the fuse cover.
Ensure the substitute is of the correct rating,
approved to BS 1363/A and ASTA or BS Kite
marked. This should only be performed by
suitably qualied personnel.
ASTA
BSI
If an extension lead is required, use an
approved and compatible lead rated for this
appliance. Follow all the instructions
supplied with the extension lead.
†Double insulated: This product is double
insulated and does not require an earth
connection to protect against electric shock
from accessible conductive parts in the
event of failure of the basic insulation.
– 3 –
Product specificaties
Merk: | Draper |
Categorie: | Hittepistool |
Model: | Storm Force 83660 |
Heb je hulp nodig?
Als je hulp nodig hebt met Draper Storm Force 83660 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Hittepistool Draper

30 Mei 2025

30 Mei 2025

30 Mei 2025
Handleiding Hittepistool
- Hittepistool Jocel
- Hittepistool Hazet
- Hittepistool Challenge Xtreme
- Hittepistool Steren
- Hittepistool Wagner SprayTech
- Hittepistool Vonroc
- Hittepistool DeWalt
- Hittepistool Rapid
- Hittepistool Powerplus
- Hittepistool Bavaria
- Hittepistool Kress
- Hittepistool Porter-Cable
- Hittepistool Ozito
- Hittepistool Bosch
- Hittepistool Ryobi
Nieuwste handleidingen voor Hittepistool

28 Maart 2025

5 December 2024

4 December 2024

1 December 2024

19 November 2024

19 November 2024

17 November 2024

16 Oktober 2024

17 Juni 2024

10 April 2024