Draper Expert 95314 Handleiding
Draper
Boormachine
Expert 95314
Lees hieronder de 📖 handleiding in het Nederlandse voor Draper Expert 95314 (24 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 8 personen en werd door 4.5 gebruikers gemiddeld met 4.9 sterren beoordeeld
Pagina 1/24
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
Stock No.95314 shown
95314 / 95092

230V 16 SPEED
BENCH/FLOOR STANDING
DRILL
1. TITLE PAGE
1.1 INTRODUCTION:
USER MANUAL FOR: 230V 16 Speed Bench/Floor Standing Drill
Stock No’s: 95314 & 95092
Part No’s: BD650/16E & DP650/16E
As our user manuals are continually updated, users should make sure that they use
the very latest version.
Downloads are available from: http://drapertools.com/manuals
Draper Tools Limited Draper Tools Limited
Hursley Road Oude Graaf 8
Chandler’s Ford 6002 NL
Eastleigh WEERT
Hampshire Netherlands
SO53 1YF
UK
Website: drapertools.com
Product Helpline: +44 (0) 23 8049 4344
General Fax: +44 (0) 23 8026 0784
1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:
WARNING! – Information that draws attention to the risk of injury or death.
CAUTION! – Information that draws attention to the risk of damage to the product or
surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal and educational use
only. Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any
other form or means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
1.2 REVISIONS:
Date first published November 2018.
Date first revised: April 2022.
2. CONTENTS
1. TITLE PAGE
1.1 INTRODUCTION..........................................................................................................2
1.2 REVISION HISTORY ..................................................................................................2
1.3 UNDERSTANDING THIS MANUAL .............................................................................2
1.4 COPYRIGHT NOTICE .................................................................................................2
2. CONTENTS
2.1 CONTENTS.................................................................................................................. 3
3. WARRANTY
3.1 WARRANTY.................................................................................................................4
4. INTRODUCTION
4.1 SCOPE.........................................................................................................................5
4.2 SPECIFICATION ..........................................................................................................5
4.3 HANDLING AND STORAGE........................................................................................ 5
5. HEALTH AND SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE ............................6-7
5.2 ADDITIONAL SAFETY INSTRUCTIONS FOR DRILLS............................................... 8
5.3 CONNECTION TO THE POWER SUPPLY ................................................................. 9
6. TECHNICAL DESCRIPTION
6.1 IDENTIFICATION ....................................................................................................... 10
7. UNPACKING AND CHECKING
7.1 PACKAGING .............................................................................................................. 11
7.2 WHAT’S IN THE BOX?............................................................................................... 11
8. PREPARING THE DRILL
8.1 BASE TO COLUMN ...................................................................................................12
8.2 TABLE BRACKET ..................................................................................................... 12
8.3 TABLE ........................................................................................................................13
8.4 HEADSTOCK .............................................................................................................13
8.5 PLUNGE HANDLES................................................................................................... 13
8.6 CHUCK AND ARBOR................................................................................................. 14
8.7 CHUCK GUARD......................................................................................................... 14
8.8 BENCH/FLOOR MOUNTING.....................................................................................14
9. SETTING THE DRILL
9.1 SPINDLE SPEED ADJUSTMENT..............................................................................15
9.2 BRILL BIT INSTALLATION/REPLACEMENT.............................................................16
9.3 NO-VOLT SWITCH..................................................................................................... 16
9.4 WORK TABLE ADJUSTMENT...................................................................................17
9.5 GENERAL DRILLING................................................................................................. 18
9.6 DUST AND SWARF ................................................................................................... 18
10. TROUBLESHOOTING
10.1 TROUBLESHOOTING ...............................................................................................19
11. MAINTENANCE
11.1 MAINTENANCE ......................................................................................................... 20
11.2 ARBOR REMOVAL ....................................................................................................20
12. OPTIONAL ACCESSORIES
12.1 OPTIONAL ACCESSORIES....................................................................................... 21
13. EXPLANATION OF SYMBOLS
13.1 EXPLANATION OF SYMBOLS ..................................................................................22
14. DISPOSAL
14.1 DISPOSAL..................................................................................................................23
DECLARATION OF CONFORMITY ..............................................................................ENCLOSED
- 3 -
Product specificaties
| Merk: | Draper |
| Categorie: | Boormachine |
| Model: | Expert 95314 |
Heb je hulp nodig?
Als je hulp nodig hebt met Draper Expert 95314 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Boormachine Draper
3 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025
2 Juni 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
25 Mei 2025
Handleiding Boormachine
- Boormachine Powerfix
- Boormachine Total
- Boormachine Clas Ohlson
- Boormachine Einhell Bavaria
- Boormachine Varo
- Boormachine Hikoki
- Boormachine Malmbergs
- Boormachine Stanley
- Boormachine Cotech
- Boormachine Duro Pro
- Boormachine Meec Tools
- Boormachine Tacklife
- Boormachine Kinzo
- Boormachine Craftsman
- Boormachine Vonroc
Nieuwste handleidingen voor Boormachine
21 Mei 2025
2 April 2025
2 April 2025
2 April 2025
31 Maart 2025
28 Maart 2025
28 Maart 2025
28 Maart 2025
28 Maart 2025
28 Maart 2025