Draper Expert 24071 Handleiding
Pagina's 8 Niet gecategoriseerd
Bekijk de handleiding van Draper Expert 24071 gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag

24071, 24072
24071
24072
EN
Original Instructions
Version 1
March 2025
BREAKBACK
TORQUE
WRENCH

2. Product Introduction
1.1 Product Reference
User Manual for: Breakback Torque Wrench
Stock No: 24071, 24072
Part No: BTW-3/4, BTW-1
1.2 Revisions
Version 1: March 2025
First release
Read this manual in full before using this product and
retain it for future use. Always use the latest version of
the manual. Please visit for drapertools.com/manuals
the latest version.
Contents
1. Preface 2
1.1 Product Reference 2
1.2 Revisions 2
2. Product Introduction 2
2.1 Intended Use 2
2.2 Specication 2
3. Health and Safety Information 3
4. Identication and Unpacking 4
4.1 Product Overview 4
4.2 Packaging 4
5. Assembly Instructions 5
5.1 Assembling the Torque Wrench 5
6. Operating Instructions 5
6.1 Setting the Torque 5
6.2 Using the Torque Wrench 5-6
6.3 Using Socket extensions & Adaptors 6
6.4 Conversion Chart 6
7. Maintenance, Storage and Disposal 7
7.1 General Maintenance and Storage 7
7.2 Calibration 7
8. Warranty 7
2.1 Intended Use
This industrial breakback torque wrench has been
designed to tighten screws, bolts and other xings to
the required torque in a clockwise and anticlockwise
direction.
Any other application beyond the conditions established
for use will be considered misuse. Draper Tools accepts
no responsibility for improper use of this product.
2.2 Specication
Stock No.2407124072
Part No.BTW-3/4BTW-1
Drive size3/4”1”
Torque Range
200 – 800Nm
(150 – 600ft-lb)
300 – 1000Nm
(200 – 750ft-lb)
Accuracy (clockwise)+/-4%+/-4%
Application
Tightening
Clockwise/
Anti-clockwise
Clockwise/
Anti-clockwise
Torque MeasurementClockwise onlyClockwise only
Head Style
Push through
ratchet
Push through
ratchet
Tooth Count36T36T
Overall Length1310mm1550mm
This torque wrench is accurate to +/- 4% of the set load
and has been manufactured and tested in accordance to
ISO 6789-1:2017.
1. Preface
– 2 –

3. Health and Safety Information
– 3 –
Important: Read all the Health and Safety instructions
before attempting to operate, maintain or repair this
product. Failure to follow these instructions may result in
damage to the workpiece, tool or cause it to require
recalibration.
• Important: ALWAYS read the manufacturer’s
instructions for the recommended torque settings.
Incorrect torque settings can result in serious damage
or injury when the workpiece is used.
• This torque wrench is a precision tool. It must NOT be
used to pry or loosen nuts, bolts or xings; to separate
materials; as a substitute for ratchet spanners or
hammers; or as a breaker bar. Used in such a way will
damage the calibration setting and invalidate your
warranty.
• DO NOT interfere with or loosen the lock nut as this
will aect the calibration. If it becomes loose do not
use the torque wrench.
• Before rst use, test the torque wrench on non-critical
xings to familiarise yourself with the responses that
indicate the congured torque is reached.
Important: Some responses may be less noticeable at
lower torques.
• select the correct size and type of socket for ALWAYS
use with the xing.
• set the torque wrench beyond its maximum or NEVER
minimum settings as this may damage the internal
spring and distort the calibration.
• ALWAYS return the torque wrench to its minimum
setting when not in use. − Failure to do this will
weaken the internal spring and distort the calibration
of the tool. Damage caused to the tool in this way is
not covered by your warranty.
• over-tighten xings as this may result in DO NOT
breakages.
• Stop applying force as soon as a noticeable ‘Click’ is
heard.
• DO NOT turn the adjustment nut (6) anti-clockwise
while setting the torque as this may cause incorrect
setting of the required torque.
• DO NOT place tubes over the handle as this will result
in damage to the torque wrench.
• Observe all standard safety precautions and good
practices when in a workshop environment.
• Inspect the product before every use for cracked,
corroded or broken parts.
WARNING!
DO NOT use this product if it is
damaged in any way. Contact Draper Tools for
repair and replacement options.
• Use this product only for its intended purpose and do
not modify it in any way.
Product specificaties
| Merk: | Draper |
| Categorie: | Niet gecategoriseerd |
| Model: | Expert 24071 |
Heb je hulp nodig?
Als je hulp nodig hebt met Draper Expert 24071 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden