Draper D20 55338 Handleiding
Draper
Boormachine
D20 55338
Lees hieronder de 📖 handleiding in het Nederlandse voor Draper D20 55338 (11 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 6 personen en werd door 3.5 gebruikers gemiddeld met 4.9 sterren beoordeeld
Pagina 1/11
MULTI-TOOL BATTERY SYSTEM
PERCEUSE COMBINÉE
SANS BALAI 20V
55338 & 79894
TALADRO SIN
ESCOBILLAS DE 20V
55338 & 79894
BERBEQUIM
COMBINADO
SEM ESCOVAS DE 20V
55338 & 79894
BÜRSTENLOSER 20V
BOHRSCHRAUBER
55338 & 79894
20V BORSTELLOZE
COMBI-BOORMACHINE
55338 & 79894
20V BRUSHLESS
COMBI DRILL
55338 & 79894 (EU 91902)
ORIGINAL LANGUAGE
1. INTRODUCTION
1.1 SCOPE
This product is intended for drilling in wood and similar
materials e.g. MDF, Plywood, plastic, metal, and impact
drilling in brick, concrete and tiles. It can also be used
for screwdriving.
This product is intended for domestic and infrequent
light trade use only. Any application other than that it
was intended for, is considered misuse.
This product is not a toy and must not be used by
children or any person with reduced physical, sensory or
mental capabilities or lack of experience and knowledge,
or people unfamiliar with these instructions.
Local regulations may restrict the age of the operator.
1.2 UNDERSTANDING THIS MANUALS
SAFETY CONTENT:
Warning! – Information that draws attention to the
risk of injury or death.
Caution! – Information that draws attention to the risk of
damage to the product or surroundings.
1.3 EXPLANATION OF SYMBOLS
Read the instruction manual.
Wear face mask and safety glasses.
Wear ear defenders.
Wear protective gloves.
Long hair must be tied back.
Do not abandon into the environment.
Keep out of the reach of children.
Warning!
Warning! Risk of crushing.
Direction of rotation.
dB
74.6
Continuous A-Weighted Sound
Pressure Level.
Class II construction
(Double insulated).
WEEE –
Waste Electrical & Electronic Equipment.
Do not dispose of Waste Electrical & Electronic
Equipment in with domestic rubbish.
Lithium-ion product.
Do not incinerate or throw
onto re.
For indoor use only.
Do not expose to rain.
Fuse protective device.
Polarity indication.
Rated voltage.
European conformity.
2. SPECIFICATION
2.1 SPECIFICATION
Stock No’s. ............................................. 55338 & 79894
Part No’s. ............................. D20CD60 & D20CD60SET
Drilling capacities:
Wood ...........................................................35mm
Mild steel .....................................................13mm
Masonry ..................................................... 10mm
Maximum torque..................................................... 60Nm
Torque settings .........................................................23+1
Revolutions per minute (n0) 0-1800r/min ........................
Impact rate 0-29,700bpm ................................................
Chuck type / Capacity Keyless / 13mm ..........................
Sound pressure level (LpA): 74.6dB(A), K=3 dB(A) ........
Sound power level (LWA): 85.6dB(A), K=3 dB(A) ...........
–
2
–
–
3
–
Uncertainty (K): ....................................................3dB(A)
Vibration level hammer
drilling in metal: <2.5m/s², K=1.5m/s2 ..............................
Vibration level hammer
drilling in concrete: 10.12m/s², K=1.5m/s2 ........................
Weight (machine only / machine & battery pack) .............
....................................................... 1.4kg / 2.06kg)
Battery pack (for 55338, sold separately):
Part No. D20B4.0AH .............................................
Type ............................................................ Li-Ion
Rated Voltage .................................................20V
Rating ......................................................... 4.0Ah
Chargers (for 55338, sold separately):
Part No. D20BCF ..................................................
Rated Voltage 230V~ .............................................
Rated Frequency ...........................................50Hz
Rated D.C. output voltage 20V .............................
Rated D.C. output current .............................4.0A
Protective device rated current..........................8A
Construction ............................................ Class II
3. HEALTH AND SAFETY
INFORMATION
3.1 GENERAL SAFETY
INSTRUCTIONS FOR POWER TOOL
USE
Warning! Read all safety warnings, instructions,
illustrations and specications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tools” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Cluttered Keep work area clean and well lit.
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the inuence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment Always
wear eye protection. Protective
equipment such as a dust mask, non-skid
safety shoes, hard hat or hearing protection
use for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your nger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better
control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair and clothing
away from moving parts. Loose clothes,
Product specificaties
| Merk: | Draper |
| Categorie: | Boormachine |
| Model: | D20 55338 |
Heb je hulp nodig?
Als je hulp nodig hebt met Draper D20 55338 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Boormachine Draper
3 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025
2 Juni 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
25 Mei 2025
Handleiding Boormachine
- Boormachine Flex
- Boormachine Scheppach
- Boormachine Lux Tools
- Boormachine Powerblade
- Boormachine Verto
- Boormachine Total
- Boormachine Kawasaki
- Boormachine Worx
- Boormachine Narex
- Boormachine Ribimex
- Boormachine Economy
- Boormachine Ferrex
- Boormachine Rok
- Boormachine Biltema
- Boormachine Truper
Nieuwste handleidingen voor Boormachine
21 Mei 2025
2 April 2025
2 April 2025
2 April 2025
31 Maart 2025
28 Maart 2025
28 Maart 2025
28 Maart 2025
28 Maart 2025
28 Maart 2025