Draper 78639 Handleiding

Bekijk gratis de handleiding van Draper 78639 (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.5 sterren uit 9 reviews. Heb je een vraag over Draper 78639 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

78639, 78641, 78642

EN

Original Instructions

Version 2 – April 2023

TORQUE

WRENCH

1. Scope

This tool has been designed to tighten screws, bolts and other xings to the

required torque. Any other application beyond the conditions established for use

will be considered misuse. Draper Tools accepts no responsibility for improper

use of this product.

Important: This torque wrench is a precision tool. It must NOT be used to pry or

loosen nuts, bolts or xings; to separate materials; as a substitute for ratchet

spanners; or as a breaker bar. Use in such a way will invalidate your warranty.

DO NOT use these tools to torque left-handed threads.

Part of our core range, this product is suitable for use by enthusiasts and

tradespersons alike.

Read this manual in full before attempting to use this product and retain it for

later use. Always use the latest version of the manual.

2.Specication

Stock No.786397864178642

Part No.BTWBTWBTW

Drive size:1/4"3/8”1/2”

Torque range:5–25Nm20–110Nm30–210Nm

3.NotesonUse

Important: Read this section in full BEFORE attempting to use this tool.

Failure to follow these instructions may result in damage to the tool or cause it to

require recalibration.

Important: ALWAYS read the manufacturer’s instructions for the recommended

torque settings. Incorrect torque settings can result in serious damage or injury

when the workpiece is used.

• Before rst use, or after extended periods of disuse, ensure that the torque

wrench is correctly lubricated:

 −Set the micrometer to its maximum torque settings and then slowly reduce

it to its minimum setting.

 −Operate the wrench several times at a low torque setting.

• Before rst use, test the torque wrench on non-critical xings to familiarise

yourself with the responses that indicate the congured torque is reached.

Important: Some responses may be less noticeable at lower torques.

• ALWAYSselect the correct size and type of socket for use with the fastening.

• NEVERset the micrometer beyond its maximum or minimum settings as this

may damage the internal spring and distort the calibration.

• ALWAYS return the torque wrenches to their minimum settings when not

in use.

 −Failure to do this will weaken the internal spring and distort the calibration

of the tool.

 −Damage caused to the tool in this way is not covered by your warranty.

• Observe all standard safety precautions and good practices when in a

workshop environment.

• Inspect the product before every use for cracked, corroded or broken parts.

WARNING! DO NOT use this product if it is damaged in any way.

Contact Draper Tools for repair and replacement options.

• Use this product only for its intended purpose and do not modify it in any way.

Reaching the Set Torque

The torque wrench exhibits the following responses when the correct torque has

been reached:

• Audible:The tool will “click”.

• Tangible:The handle will “break away” from the xing.

• Visible:The handle will be seen to “break away” from the xing.

Important: These responses may be less perceptible at lower torques.

CAUTION! Once this has occurred, DO NOT continue to rotate the

torque wrench as this will deliver an incorrect torque and may damage

thexing.

8.Warranty

Should the tool develop a fault, return the complete tool to your nearest

distributor or contact Draper Tools directly. Proof of purchase must be provided.

If, upon inspection, it is found that the fault occurring is due to defective

materials or workmanship, repairs will be carried out free of charge. This warranty

covers parts and labour for the lifetime of the product. However, if the tools are

hired out, the warranty period is 90 days from the date of purchase.

This warranty does not apply to any consumable parts, batteries or normal wear

and tear, nor does it cover any damage caused by misuse, careless or unsafe

handling, alterations, accidents, or repairs attempted or made by any personnel

other than the authorised Draper Tools repair agent.

Visit drapertools.com/warranty for full details.

9.ExplanationofSymbols

Read the instruction manual

30

Nm

MIN

Minimum Nm

Please visit drapertools.com/manualsfor the latest version for this manual.

210Nm

MAX

Maximum Nm

1/2"

SQ DR

Square Drive

Delta International

Delta International BV

Oude Graaf 8

6002 NL

Weert

Netherlands

Draper Tools

Draper Tools Limited

Hursley Road, Chandler’s Ford

Eastleigh, Hampshire, SO53 1YF UK

Website: drapertools.com

Email: sales@drapertools.com

Product Helpline: +44 (0) 23 8049 4344

Telephone Sales Desk: +44 (0) 23 8049 4333

General Enquiries: +44 (0) 23 8026 6355

GeneralFax: +44 (0) 23 8026 0784

© Published by Draper Tools Limited

Product specificaties