Draper 70433 Handleiding
Draper
Ventilator
70433
Lees hieronder de 📖 handleiding in het Nederlandse voor Draper 70433 (6 pagina's) in de categorie Ventilator. Deze handleiding was nuttig voor 15 personen en werd door 8 gebruikers gemiddeld met 4.7 sterren beoordeeld
Pagina 1/6
FLOOR
FANS
70432, 70433, 70438.
ORIGINAL LANGUAGE
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions
before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
Stock No. 70432 shown
1. INTRODUCTION
1.1 SCOPE
Suitable for circulating air on the floor level to create
ventilation and help cool spaces. Ideal for use in and
around the home, gym, office or workshop.
Part of our core range, this product is suitable for
enthusiasts and tradespersons alike. Any application
other than that it was intended for, is considered misuse.
Local regulations may restrict the age of the operator.
1.2 UNDERSTANDING THIS MANUALS
SAFETY CONTENT:
Warning! – Information that draws attention to the
risk of injury or death.
Caution! – Information that draws attention to the risk of
damage to the product or surroundings.
1.3 EXPLANATION OF SYMBOLS
Before plugging in your tool, make sure the socket
voltage matches that on the product plate. If the socket
voltage does not match that shown on the type plate, it
can result in a serious hazard and damage to your tool.
Important: Read instruction manuals
before operating and servicing this
equipment.
For indoor use.
Do not expose to rain.
Rated voltage
Motor capacity (Watts).
(example of icon)
Machine weight.
(example of icon)
WEEE –
Waste Electrical & Electronic Equipment.
Do not dispose of Waste Electrical & Electronic
Equipment in with domestic rubbish.
Class 1 appliance
(Must be earthed).
Energy related Products.
UK Conformity Assessed.
European conformity.
2. SPECIFICATION
2.1 SPECIFICATION
Stock No. 70432 ..............................................................
Part No. HV16FF .............................................................
Rated voltage .................................................. 230~50Hz
Rated input .............................................................100W
Fan diameter Ø 15.3" (388mm) ........................................
Guard diameter Ø 18" (457mm)........................................
Speed Settings ...............................................................3
Air flow (high) ...............................................90.24m
3
/min
Noise level (max) ............................................65.29dB(A)
Weight (nett) ............................................................ 3.5kg
Stock No. 70433 ..............................................................
Part No. HV18FF .............................................................
Rated voltage .................................................. 230~50Hz
Rated input .............................................................120W
Fan diameter Ø 17.2" (437mm) ........................................
Guard diameter Ø 20.25" (514mm)...................................
Speed Settings ...............................................................3
Air flow (high) .............................................106.93m
3
/min
Noise level (max) ............................................65.65dB(A)
Weight (nett) ............................................................ 4.6kg
Stock No. 70438 ..............................................................
Part No. HV20FF .............................................................
Rated voltage .................................................. 230~50Hz
Rated input .............................................................120W
Fan diameter Ø 18.7" (475mm) ........................................
Guard diameter Ø 21.5" (546mm).....................................
Speed Settings ...............................................................3
Air flow (high) .............................................174.53m
3
/min
Noise level (max) ............................................66.79dB(A)
Weight (nett) ............................................................ 5.2kg
3. HEALTH AND SAFETY
INFORMATION
3.1 HEALTH AND SAFETY FOR FANS
Warning! – Please read the following instructions
carefully, failure to do so could lead to serious personal
injury.
Draper Tools Ltd, recommends that this fan not be
–
2
–
–
3
–
modified or used for any application other than that for
which is was designed. If you are unsure of its relative
applications, do not hesitate to contact us in writing and
we will advise you.
• Keep out of the reach of children.
• Ensure fan is situated and used in an area free from
loose furnishings, clothing, curtains etc that could get
sucked in to the fan air inlet, or could block the fan
blades.
• Do not leave the fan running unattended.
• Ensure the fan is situated and used in an area free
from dust and ash that could be sucked up and
cause air pollution. This will also damage the motor.
• Remove the plug from the socket before carrying out
adjustment, servicing or maintenance.
• Complete any assembly procedures prior to
connection to the power supply.
• Never insert fingers, pencils, or any other object
through the protective grille, while the fan is running.
• Disconnect the fan from the power supply when
moving it from one location to the other.
• Ensure the fan is switched off from the mains supply
before removing the grille.
• Always complete the assembly of the fan before
switching it on after cleaning.
• Always ensure the fan is secure on a firm and secure
surface before operating.
• Do not use the fan near an open window, as rain can
create an electrical hazard.
• If the power supply cable becomes damaged, it
should be replaced immediately.
• If replacement of the supply cord is necessary, this
should be carried out by the manufacturer or
appropriate agent in order to avoid a safety hazard.
• Do not use this fan with an independant externally
connected speed control device.
• Do not cover when in use.
• Do not use in the immediate surroundings of a bath,
shower or swimming pool.
3.2 CONNECTION TO THE POWER
SUPPLY
Caution: Risk of electric shock. Do not open.
This appliance is supplied with an approved plug and
cable for your safety. The value of the fuse fitted is
marked on the pin face of the plug. Should the fuse
need replacing, ensure the substitute is of the correct
rating, approved to BS1362 and ASTA or BS Kite
marked.
ASTA
BSI
Make sure the power supply information on the
machine’s rating plate are compatible with the power
supply you intend to connect it to.
If a replacement plug is to be fitted this must be carried
out by a qualified electrician.
The damaged or incomplete plug, when cut from the
cable shall be disabled to prevent connection to a live
electrical outlet.
This appliance is Class I
†
and is designed for
connection to a power supply matching that detailed on
the rating label and compatible with the plug fitted.
If an extension lead is required, use an approved and
compatible lead rated for this appliance. Follow all the
instruction supplied with the extension lead.
†
Earthed: This product requires an earth connection
to protect against electric shock from accessible
conductive parts in the event of a failure of the basic
insulation.
Important: If using an extension lead, follow the
instructions that came with your lead regarding
maximum load while cable is wound. If in doubt, ensure
that the entire cable is unwound. Using a coiled
extension lead will generate heat which could melt the
lead and cause a fire.
4. UNPACKING AND
CHECKING
4.1 PACKAGING
Carefully remove the product from the packaging and
examine it for any sign of damage. Check contents
against the parts shown in Fig A. If any part is damaged
or missing, please contact the Draper Help Line (see
back page). Do not attempt to use the product!
The packaging material should be retained during the
warranty period, in case the product needs to be
returned for repair.
Warning!
• Some of the packaging materials may be harmful to
children. Do not leave any of these materials in
reach of children.
• If any of the packaging is to be thrown away, make
sure they are disposed of correctly, according to local
regulations.
Product specificaties
| Merk: | Draper |
| Categorie: | Ventilator |
| Model: | 70433 |
Heb je hulp nodig?
Als je hulp nodig hebt met Draper 70433 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Ventilator Draper
30 Mei 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
Handleiding Ventilator
- Ventilator Tecnolux
- Ventilator Basetech
- Ventilator Tomado
- Ventilator SereneLife
- Ventilator Vornado
- Ventilator Solac
- Ventilator Orima
- Ventilator Bestherm
- Ventilator Crivit
- Ventilator Mystery
- Ventilator Stadler Form
- Ventilator Proklima
- Ventilator BEKO
- Ventilator Termozeta
- Ventilator Ausclimate
Nieuwste handleidingen voor Ventilator
6 Juni 2025
3 Juni 2025
3 Juni 2025
30 Mei 2025
30 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025