Draper 70046 Handleiding
Draper
Lasapparaat
70046
Lees hieronder de 📖 handleiding in het Nederlandse voor Draper 70046 (10 pagina's) in de categorie Lasapparaat. Deze handleiding was nuttig voor 6 personen en werd door 3.5 gebruikers gemiddeld met 3.7 sterren beoordeeld
Pagina 1/10
GAS/GASLESS
200A MIG INVERTER
MULTI WELDER
70046
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions
before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
1. INTRODUCTION
1.1 SCOPE
This MIG/ARC welding machine is designed to weld
ferrous metals such as steel and iron. This machine can
perform MIG and ARC/MMA welding.
This product is suitable for enthusiasts and
tradespersons alike. Any application other than that it
was intended for, is considered misuse.
This product is not a toy and must not be used by
children or any person with reduced physical, sensory or
mental capabilities or lack of experience and knowledge,
or people unfamiliar with these instructions.
Local regulations may restrict the age of the operator.
1.2 UNDERSTANDING THIS MANUALS
SAFETY CONTENT:
Warning! – Information that draws attention to the
risk of injury or death.
Caution! – Information that draws attention to the risk of
damage to the product or surroundings.
1.3 EXPLANATION OF SYMBOLS
Warning!
Read the instruction manual.
Warning!
Wear suitable welding eye/face protection.
Warning!
Wear ear defenders (During grinding
operations).
Warning!
Wear protective gloves.
Keep out of the reach of children.
Warning!
Danger of electric shock.
Danger of fire.
Danger of explosion.
Danger of fumes.
Danger of ultraviolet radiation.
Danger of burning splashes.
Pressure bottle to be secured by chain.
Fan cooled.
Input current.
Input voltage.
Protection rating.
Thermal overload.
MMA range.
MIG range.
MIG welding (Metal Inert Gas) or
GMAW (Gas Metal Arc Welding).
ARC welding (stick), MMA ( Manual Metal
Arc) or
SMAW (Shielded Metal Arc Welding).
Machine weight.
WEEE –
Waste Electrical & Electronic Equipment.
Do not dispose of Waste Electrical & Electronic
Equipment in with domestic rubbish.
–
2
–
–
3
–
Do not incinerate or throw
onto fire.
For indoor use only.
Do not expose to rain.
Class 1 appliance
(Must be earthed).
UK Conformity Assessed.
European conformity.
2. SPECIFICATION
2.1 SPECIFICATION
Stock No. 70046 ..............................................................
Part No. MI200A ..............................................................
Rated voltage .................................................. 230~50Hz
Input current 32A ..............................................................
Current range
MIG ........................................................ 20 - 200A
MMA ...................................................... 20 - 180A
MIG wire range 0.6 - 1.2mm .............................................
MMA Electrode size 1.6 - 5.0mm.......................................
MIG Wire Spool .......................................................... 5kg
Dinse Type Socket ................................................10 / 25
Degree of protection IP21S ..............................................
Cooling ............................................................... Air (fan)
Insulation class .............................................................. F
Duty cycle: 60% @ 200A / 100% @ 160A ........................
Weight (Gross/Net/machine only) ....................................
....................................................16.9/16.1/12.6kg
3. HEALTH AND SAFETY
INFORMATION
3.1 General Safety Instructions
Warning! Read all safety warnings and all
instructions. When using electric tools basic safety
precautions should always be followed to reduce the risk
of fire, electric shock, and personal injury including the
following.
Read all these instructions before attempting to operate
this product and save these instructions.
Electric shock can kill:
– Remove the plug from the socket before carrying out
adjustment, servicing, or maintenance.
– Allow 5 minutes waiting time for the capacitors to
discharge before removing the panels for any
maintenance operations
– Do not touch live electrical parts.
– Never use electrode holders or cables with damaged
or deteriorated insulation.
– Keep the working environment, equipment, cables,
and clothing free from grease, oil, moisture, and dirt.
– Ensure the welding machine has been correctly
earthed and all panels are fitted securely.
– The operator must be insulated from the floor and
workbench using a dry insulation mat.
– Wear isolating footwear and gloves that are in good
condition, i.e. without holes.
– In hazardous conditions of increased electric shock
always ensure a second person is present in case of
an accident.
– Never change electrodes with bare hands or damp
gloves (for ARC/MMA welders).
– Keep welding cables away from power cables.
– Regularly inspect the condition of the welding, earth,
and power cables for signs of damage.
– Do not leave the machine unattended and remove
the plug from the socket when not in use.
– Do not use welding cables unsuitable for the
amperage.
– Ensure the earth clamp is adjacent to the weld seam,
secured to bare metal and when not in use is
insulated for safety.
– Keep all equipment well maintained.
– The operator shall prevent gas cylinders in the
vicinity of the workpiece from becoming part of the
welding circuit.
Fumes & Gases can be harmful:
– The welding process generates hazardous fumes as
a by-product. Inhalation of these fumes is hazardous
to health.
– Keep your head away from the weld to avoid
breathing the fumes.
– If welding in confined spaces ensure adequate
ventilation and use a fume extractor.
– Welding fumes displace oxygen. The danger of
suffocation.
– By-products of welding can react with other chemical
vapours to produce a toxic/explosive environment.
Welding can cause fire or explosion:
– Arc welding and allied processes can cause fire and
explosions and precautions shall be taken to
prevent these hazards.
Product specificaties
| Merk: | Draper |
| Categorie: | Lasapparaat |
| Model: | 70046 |
Heb je hulp nodig?
Als je hulp nodig hebt met Draper 70046 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Lasapparaat Draper
5 Juni 2025
4 Juni 2025
3 Juni 2025
3 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
30 Mei 2025
30 Mei 2025
30 Mei 2025
Handleiding Lasapparaat
- Lasapparaat Anova
- Lasapparaat Gys
- Lasapparaat Gude
- Lasapparaat Bavaria
- Lasapparaat Topex
- Lasapparaat Ferm
- Lasapparaat Silverline
- Lasapparaat Stanley
- Lasapparaat Ozito
- Lasapparaat Kemppi
- Lasapparaat Hyundai
- Lasapparaat MSW
- Lasapparaat Stamos
- Lasapparaat Taurus
- Lasapparaat Hyper Welding
Nieuwste handleidingen voor Lasapparaat
25 Mei 2025
25 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
24 Mei 2025
23 Mei 2025