Draper 16395 Handleiding
Draper
Niet gecategoriseerd
16395
Bekijk gratis de handleiding van Draper 16395 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 3.9 sterren uit 6.5 reviews. Heb je een vraag over Draper 16395 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
EN
Original Instructions
Version 2
February 2025
MANUAL
TYRE
CHANGER
1. Technical Description
(1) Tyre lever x 1
(2) Support plate x 1
(3) Clevis pin x 2
(4) Bolt M10x25 x 4
(5) Flat washer Ø10 x 4
(6) Lock washer Ø10 x 4
(7) Nut M10 x 4
(8) Base/long leg x 1
(9) Short leg x 1
(10) Pedestal x 1
(11) Bead breaker x 1
(12) Locking pin x 2
(13) Force handle x 1
(14) Slotted press plate x 1
(15) Threaded cap x 1
(16) Locating pin x 1
(17) Bead breaker head x 1
15
14
13
12
11
104
3
2
16
1
5
6
7
17
9
8
WARNING!
Extreme
caution must be used if
attempting to replace
tyres on alloy wheels. This
machine is designed to be
used on steel wheels and
Draper Tools Ltd accepts
no responsibility for any
damage to wheels or
tyres.
NOTE: For safe and eective use
of this tyre changer it MUST be
securely bolted down to the
oor using suitable xings.
16395
2. Operation
© Published by Draper Tools Limited
Delta International
Delta International BV
Oude Graaf 8
6002 NL
Weert
Netherlands
2.1. BREAKING THE BEAD - FIG. 1
1 Fig.
• Remove all wheel weights and tyre valve core to
release tyre pressure, lay the wheel at on the
Base/long leg (8) in front of the bead breaker (11).
• Adjust bead breaker (11) (if required) and position the
bead breaker head (17) between tyre wall and wheel
rim, using the tyre lever (1) inserted into the force
handle (13) and lever down to break the bead. Repeat
around the wheel until bead is free from wheel rim,
then turn the wheel over and repeat the process until
the tyre is free from both beads.
2.2. TYRE REMOVAL - FIG. 2
2 Fig.
• Lubricate both tyre beads with appropriate tyre soap.
• Mount the wheel onto the support base (valve side
up), ensure the locating pin (16) is through one of the
wheel holes and lock down using the slotted press
plate (14) and threaded cap (15).
• Place the at end of the tyre lever (1) between the tyre
bead and the wheel rim, while applying pressure to
the tyre side wall, lever against the cap and rotate the
tyre lever in a clockwise direction.Repeat action on
second bead.
2.3. FITTING - FIG. 3
3 Fig.
• Lubricate both tyre beads.
• Using the tyre lever (1) foot end, locate between the
lower bead and wheel rim, lever against the cap and
rotate clockwise around the cap.
• Repeat action on second bead, then replace valve
core, inate tyre to ensure tyre locates correctly onto
rim ( exceed maximum allowance tyre DO NOT
pressure). Set to required tyre pressure.
• We would recommend that wheel is correctly
balanced before use.
Contact Details
Draper Tools
Draper Tools Limited
Hursley Road
Chandler’s Ford
Eastleigh
Hampshire
SO53 1YF
UK
Website: drapertools.com
Email: sales@drapertools.com
Product Helpline: +44 (0) 23 8049 4344
Telephone Sales Desk: +44 (0) 23 8049 4333
General Enquiries: +44 (0) 23 8026 6355
Please contact the Draper Tools Product Helpline
for repair and servicing enquiries.
Product specificaties
| Merk: | Draper |
| Categorie: | Niet gecategoriseerd |
| Model: | 16395 |
Heb je hulp nodig?
Als je hulp nodig hebt met Draper 16395 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Draper
7 Juni 2025
7 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
5 Juni 2025
5 Juni 2025
5 Juni 2025
4 Juni 2025
Handleiding Niet gecategoriseerd
- Selfsat
- Metronic
- Eico
- Traulsen
- BRIO
- GeoVision
- Rohnson
- Aroma
- Rolls
- Defender
- Exped
- Sumiko
- Ernesto
- Grothe
- Hacienda
Nieuwste handleidingen voor Niet gecategoriseerd
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025