Draper 09951 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Draper 09951 (3 pagina's) in de categorie Werkbank. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.4 sterren beoordeeld
Pagina 1/3
EN
09951
WORKBENCH
TILT AND CLAMP FOLD DOWN
Original Instructions
Version 3 – February 2025
No. Part Description Qty
(1) Worktops 2
(2) Slide Base 2
(3) M8 Bolts 4
(4) Crossbars 2
(5) Leg Frames 2
(6) Plastic Feet 4
(7)
8mm
Washers
8
Intended Use
This light weight portable workbench is designed for use
as a worksurface or saw horse and is suitable for a variety
of clamping operations.
Any other application beyond the conditions established
for use will be considered misuse. Draper Tools accepts
no responsibility for improper use of this product.
Read this manual in full before using this product and
retain it for future use. Always use the latest version of
the manual. Please visit for drapertools.com/manuals
the latest version.
Specication
Stock No. 09951
Part No. WBTT600Y
Maximum Load Capacity 100kg
Maximum Clamp Opening 275mm
Clamping Tilt Angles 0°, 45° and 90°
Dimensions 600 x 635 x 800mm
Net Weight (approx.) 6.1kg
Health and Safety Information
Important: Read all the Health and Safety instructions
before attempting to operate, maintain or repair this
product. Failure to follow these instructions may
result in injury or damage to the user, the product or
the workpiece.
• Observe all standard safety precautions and good
practices when in a workshop environment.
• Read all the safety information associated with any
tools to be used in conjunction with this workbench.
• Use all appropriate personal protective equipment
when working with tools.
• Be mindful that tools that may damage the workbench
frame or work surface if used carelessly.
• Before every use, inspect the workbench for broken,
cracked, loose or corroded parts.
• Important: DO NOT use this product if it is damaged
or its structural integrity is compromised.
• Ensure that the workbench is fully assembled, opened
and tightened before use, with the folding braces
locked in place.
• Ensure that the workbench is positioned on rm and
level ground while it is in use.
• DO NOT use the workbench on slippery or wet
surfaces.
• DO NOT climb or stand on the workbench.
•  exceed the rated weight limit.DO NOT
• DO NOT store heavy loads on the workbench for
extended periods.
• Position the workpiece so that the weight is evenly
distributed and does not overbalance the workbench.
• NEVER clamp or mount tools to the workbench.
•  expose the product to rain or wet DO NOT
environments.
• Take care when lifting or moving the workbench.
• Store the workbench in a clean and dry location, out
of direct sunlight and out of reach of children.
CAUTION!
DO NOT overtighten the clamps.
Please visit for our full range of drapertools.com
accessories and consumables.
Identication
Carefully remove the product from the packaging and
examine it for any signs of damage that may have
occurred during shipment. Check against parts list below
© Published by Draper Tools Limited© Published by Draper Tools Limited
Delta International
Delta International BV
Oude Graaf 8
6002 NL
Weert
Netherlands
Contact Details
Draper Tools
Draper Tools Limited
Hursley Road
Chandler’s Ford
Eastleigh
Hampshire
SO53 1YF
UK
Website: drapertools.com
Email: sales@drapertools.com
Product Helpline: +44 (0) 23 8049 4344
Telephone Sales Desk: +44 (0) 23 8049 4333
General Enquiries: +44 (0) 23 8026 6355
Please contact the Draper Tools Product Helpline for repair and servicing enquiries.
Product specificaties
| Merk: | Draper |
| Categorie: | Werkbank |
| Model: | 09951 |
Heb je hulp nodig?
Als je hulp nodig hebt met Draper 09951 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Werkbank Draper
2 Juni 2025
2 Juni 2025
30 Mei 2025
Handleiding Werkbank
- Werkbank Fein
- Werkbank Festool
- Werkbank Gamma
- Werkbank Gude
- Werkbank Kupper
- Werkbank Royal Catering
- Werkbank Probuilder
Nieuwste handleidingen voor Werkbank
30 Januari 2025
30 Januari 2025
30 Januari 2025
30 Januari 2025
30 Januari 2025
30 Januari 2025
30 Januari 2025
30 Januari 2025
30 Januari 2025
30 Januari 2025