Draper 03387 Handleiding

Bekijk gratis de handleiding van Draper 03387 (2 pagina’s), behorend tot de categorie slot. Deze gids werd als nuttig beoordeeld door 50 mensen en kreeg gemiddeld 4.7 sterren uit 3 reviews. Heb je een vraag over Draper 03387 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

EN

Original Instructions

Version 1 – April 2022

Stock No. Part No. 03387 KL3

COMBINATION LOCK

WALL-MOUNTED

KEY BOX

Read this manual in full before

attempting to use this product and

retain it for later use. Always use

the latest version of the manual.

1. Health and Safety

Information

• When installing the key box, read and

understand all instructions and safety

information relating to any tools required.

• Be aware of any electrical cables that may

be present within the wall upon which the

key box is to be mounted.

• Keepngersclearoftheedgesandhinges

when opening and closing the door.

2. Setting a New

Combination

1. Open the shutter to access the

combination wheels (Fig. 1).

2. Rotate the combination wheels until the

current combination reads across the

centre line (Fig. 2).

Important: The default code as shipped is

0000. Draper Tools highly recommends

that you change this code before use.

3. Press and hold the lever down and pull the

door open using the tab at the top (Fig. 3).

4. Slide the switch into position RESETB

(Fig. 4).

5. Rotate the wheels so that the desired

combination reads across the centre line,

then slide the switch into position RESET

A (Fig. 5).

6. Place the item inside the box and close

the door so that it clicks into place (Fig. 6).

7. Scramble the combination wheels and

close the shutter.

3. Opening the Key Box

1. Open the shutter and rotate the

combinationwheelsuntilthecongured

combination reads across the centre line.

2. Press and hold the lever down and pull the

door open using the tab at the top.

3. When closing the box, ensure that the

boxclicksrmlyintoplacebefore

scrambling the combination wheels and

closing the shutter.

4. Installation

1. Open the door and position the key box

against the wall or surface.

2. Check that the key box is square and mark

the position of the holes.

3. Remove the key box and drill the holes

as appropriate.

Important: Observe all applicable

Health and Safety guidance when drilling.

4. Align the key box with the holes and insert

the appropriate screws tightly.

5. Close the key box door and scramble the

combination wheels.

Product specificaties