Doro 1380 Handleiding

Doro Mobiele telefoon 1380

Lees hieronder de 📖 handleiding in het Nederlandse voor Doro 1380 (2 pagina's) in de categorie Mobiele telefoon. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2



Press the card’s lid carefully towards the

assistance buon unl it “clicks”. Li the lid

to an upright posion. Make sure the card’s

contacts are facing downwards. Fold down the

lid and carefully push it down, sliding it back in

place.

Note! The circuit boards (metal part) on the

cards must not be scratched or bent. Try not

to touch the circuits with your ngers.



Insert the baery by

sliding it into the baery

compartment with the

circuits facing down to

the right. Replace the

baery cover.

Note! For internaonal calls, always use +

before the country code for best operaon.

Press * twice for the internaonal prex .+



1. Press  to open the phonebook.

2. Use / to scroll through the

phonebook, or quick search by pressing the

key corresponding to the rst leer of the

name.

3. Press  â, alternavely, press

to dial the selected entry, or press

 to return to standby.



1. Press to answer, or press  to

switch o the ring signal and then Reject

(busy signal).

Alternately, press to reject the call

directly.

2. Press to end the call.



Use / to adjust the sound volume

during a call. The volume level is indicated on

the display.

4. ASSISTANCE BUTTON

The assistance buon allows easy access to

contact your predened help numbers should

you need help. Make sure that the assistance

funcon is acvated before use and make all

necessary conguraons.Test the applicaon

thoroughly.



1. When help is needed, press and hold the

assistance buon for 3 seconds, or press it

twice within 1 second.

The assistance call begins aer a delay of

5 seconds. In this me you can prevent a

possible false alarm by pressing .

2. An assistance text message (SMS) is sent to

all recipients. The rst recipient in the list

is dialled. If the call is not answered within

25 seconds, the next number is dialled.

Dialling is repeated 3 mes or unl the call

is answered, or unl is pressed.

Doro 1380

Quick

Quick Start

Start

Start Guide

Guide

GuideQuick Start Guide

1. Speaker

2. Le selecon

buon

3. Call buon

4. Voicemail

5. Keypad lock and

Internaonal

prex/symbols

6. Silent /

Input method

7. Scroll buons

8. End call /

Power on/

9. Right selecon

buon

10. Torch buon

11. Torch

12. Headset socket

1. GET STARTED





Be careful not

to damage your

ngernails when you

remove the baery

cover. Do not bend or

twist the baery cover

excessively as it may

be damaged.



Remove the baery if it is

already installed. There are

two SIM card slots, SIM1

and SIM2. If you are to

use only one SIM card, we

recommend to use SIM1

slot.

Slide the card under the

metal part, with the gold-

coloured circuit board

facing down.

The cut-o corner of

the card helps to you place the card, correct

placement is indicated in the compartment.

Charge the phone

CAUTION

Only use baeries, charger and accessories

that have been approved for use with

this parcular model. Connecng other

accessories may be dangerous and may

invalidate the phone’s type approval and

guarantee.

When the baery is running low, is

displayed and a warning signal is heard.

• Connect the mains adapter to the wall

socket and to the charging socket y.

Tip: Don’t forget to remove the protecve

plasc lm from the display.

2. GET TO KNOW YOUR PHONE



1. Press and hold the red buon on the

phone to turn it on/o. Conrm with Yes to

power o.

2. If the SIM card is valid but protected with a

PIN code (Personal Idencaon Number),

 is displayed. Enter the PIN

code and press OK. Delete with .

Note! If PIN and PUK codes were not provided

with your SIM card, please contact your

service provider.

 shows the number of PIN

aempts le. When no more aempts remain,

 is displayed. The SIM card must

now be unlocked with the PUK code (Personal

Unblocking Key).

1. Enter the PUK code and conrm with .OK

2. Enter a new PIN code and conrm with .OK

3. Re-enter the new PIN code and conrm

with OK.



When starng the telephone for the rst me,

you can use the start-up wizard to set some

basic sengs.

Tip: You can run the start-up wizard later if

you want.



In this document the arrow (â) indicates next

acon in the step-by-step instrucons.

To conrm an acon in the phone, press . To OK

select an item, scroll or highlight the item using

/ and then press OK.

Enter text

• Press a numerical key repeatedly unl the

desired character is shown. Wait a few

seconds before entering the next character.

• Press * for a list of special characters.

Select the desired character with /

and press OK to enter it.

• Use / to move the cursor within the

text.

• Press # to cycle upper case, lower case and

numerals.

• Press and hold # to change wring

language.



The default language is determined by the SIM

card.





1. Enter the phone number. Delete with .

2. AbortPress to dial. Press to cancel

the call.

3. Press to end the call.



Silent is a xed prole with keypad tone,

message tone and ring tone disabled, while

vibraon, tasks and alarm are unchanged.

• Press and hold # to acvate and to

deacvate silent.



During a call the so keys ( ) give access to

addional funcons.



Use 0 and 2–9 to speed dial an entry from

standby.

• Press and hold the corresponding buon to

dial.



1. Press  â ââ

.

2. Select 0 Addâ and select an entry from

the phonebook.

3. OKPress to conrm.

4. Repeat to add speed dial entries for buons

2–9.



As long as the phone is switched on, it is always

possible to place an SOS call by entering the

main local emergency number for your present

locaon followed by .



Received, missed, and dialled calls are saved in

a combined call log. 20 calls of each type can

be stored in the log. For mulple calls related

to the same number, only the most recent call

is saved.

1. Press .

2. Use / to scroll through the call log.

= 

= 

= 

3. Press to dial, or .

3. PHONEBOOK

The Phonebook can store 100 entries with 3

phone numbers in each entry.

Add a contact

1. Press  â â

-New contact- Add â.

2. Enter a for the contact, see  Enter

text. Delete with .

3. Use / to select , or  

, and enter the phone number(s)

including the area code.

4. When done, press Save.



In the event of a trauma, it is crical to have

this informaon as early as possible to increase

the chances of survival. Add ICE contact to

improve your own safety. First responders

can access addional informaon such as

medicaon and next of kin from your phone in

case of an emergency. All elds are oponal,

but the more informaon provided the beer.

Press  â âICE.

1. Use / to scroll the list of entries.

2. EditPress to add or edit informaon in each

entry. Delete with .

3. Press Save when done.

CAUTION

When an assistance call is acvated the phone

is pre-set to handsfree mode. Do not hold

the device near your ear when the handsfree

mode is in use, because the volume may be

extremely loud.



• Press  â âAssistance.

5. MESSAGES



1. Messages Create newPress  â â

â SMS.

2. Write your message, see Enter text, then

press To.

3. Select a recipient from 

.

Alternavely, select  to add

recipient manually and press OK.

4. You can modify the recipients by selecng

one and press  âEdit/ /

.

5. SendWhen done, press  â.



Both you and the recipient must have sub-

scripons that support picture message. The

sengs for picture message are supplied by

your service provider and can be sent to you

automacally via text message.

1. Messages Create newPress  â â

â MMS.

2. Write your message, see Enter text.

3. Press  â:

•  to select a le.

•  to use the camera to take a

picture.

Note! To keep best picture quality, send only

one picture per message.

You can also , , and  Add video

Preview MMS using the  menu.

4. Press and enter  â

your subject, then press  âDone.

5. Press  âTo and select recipient

from .

Alternavely, select Enter recipient to add

recipient manually and press  â

Done.

6. SendPress  â to send.



• Press  â âMessages.

6. 

1. Press  â.

2. OKPress to take the photo.

3. Press or press   to take a new

photo (if you do not make any selecon the

picture is saved).



• Press  â â.

7. BLUETOOTH®

You can connect wirelesses to other Bluetooth®

compable devices such as headsets or other

phones.

Important!

When you are not using Bluetooth® connecv-

ity, turn o   or . Do not pair

with an unknown device.

®

1. Press  â â â

 âOn.

2. OKPress to conrm.

Search device

1. Press  â â â

Search device.

2. Select a device from the list and press Bond

to connect. If Bluetooth® is not enabled,

press Yes to acvate.

3. OKPress to conrm.

8. SOUND & DISPLAY



1. Press  â â â

  â.

2. Use / to select one of the available

melodies, the melody will be played.

3. OKPress to conrm or  to discard

changes.

English

Note! All illustraons are for illustrave

purposes only and may not accurately depict

the actual device. The items supplied with your

phone might vary depending on the soware

and accessories available in your region or

oered by your service provider. You can obtain

addional accessories from your local Doro

dealer. The supplied accessories provide the

best performance with your phone.

13. Camera

14. Assistance buon

15. Loudspeaker

16. Microphone

17. Charging cradle

connectors

18. Charging socket

www.doro.com

Model: DFB-0350

Doro 1380 (1011,1031)

QSG

English

QSG_Doro_1380_en_A3-A7_v11_1011_1031

www.doro.com

Text size

You can customise the text size for the menu

and messages.

1. Press Menu âSengs âDisplay â

Text size:

• or Normal Large.

2. OKPress to conrm.

Brightness

You can customise the brightness sengs. The

higher value, the beer contrast.

1. Press Menu âSengs âDisplay â

Brightness:

• Level 1-3.

2. OKPress to conrm.

9. ADDITIONAL FUNCTIONS

Alarm

1. OnPress Menu âAlarm â.

2. Enter the alarm me using the keypad and

press OK to conrm.

• , for a single occurrence,Single

• Repeated, for a repeated alarm. Scroll

through the list of days and press or On O

to enable or to disable for each day.

3. When done, press Save.

4. When the alarm goes o a signal will sound.

Press Stop to turn o the alarm or press

Snooze to repeat the alarm aer 9 minutes.

Note! The alarm works even when the phone

is switched o. Do not power on if wireless

phone use is prohibited or when it may cause

interference or danger.

Torch

Slide up to turn on the torch. Slide down

to turn o.

Reset sengs

1. Press Menu âSengs âSecurity.

2. Select Reset sengs to reset the phone

sengs. All the changes that you have

made to the phone sengs will be reset to

default sengs.

3. Enter the phone code and press OK to reset.

Tip: The default phone code is 1234.

Reset all

1. Press Menu âSengs âSecurity.

2. Select to delete phone sengs Reset all

and content such as contacts,number lists

and messages (SIM memory is not aected).

3. Enter the phone code and press OK to reset.

Failure to connect to network

SIM card invalid Contact the service provider.

No coverage of GSM service Contact the service provider.

Failure to add a contact

Phonebook memory full Delete contacts to free up

memory.

Failure to set a funcon

Funcon not supported or

subscribed from network Contact the service provider.

11. SAFETY INSTRUCTIONS

WARNING

The unit and the accessories can contain small parts. Keep all of

the equipment out of the reach of small children.

The mains adapter is the disconnect device between the product

and mains power. The mains socket outlet must be close to the

equipment and easily accessible.

Network services and costs

Your device is approved for use on the

GSM 850/900/1800/1900 MHz networks. To use the device,

you need a subscripon with a service provider.

Using network services may result in trac costs. Some

product features require support from the network, and you

may need to subscribe to them.

Operang environment

Follow the rules and laws that apply wherever you are, and

always turn o the unit whenever its use is prohibited or can

cause interference or hazards. Only use the unit in its normal

user posion.

Parts of the unit are magnec. The unit can aract metal

objects. Do not keep credit cards or other magnec media near

the unit. There is a risk that informaon stored on them can be

erased.

Medical units

The use of equipment that transmits radio signals, for example,

mobile phones, can interfere with insuciently protected

medical equipment. Consult a doctor or the manufacturer

of the equipment to determine if it has adequate protecon

against external radio signals, or if you have any quesons. If

noces have been put up at health care facilies instrucng

you to turn o the unit while you are there, you should comply.

Hospitals and other health care facilies somemes use

equipment that can be sensive to external radio signals.

Implanted medical devices

To avoid potenal interference, manufacturers of implanted

medical devices recommend a minimum separaon of 15 cm

between a wireless device and the medical device. Persons

who have such devices should:

• Always keep the wireless device more than 15 cm from the

medical device.

• Not carry the wireless device in a breast pocket.

• Hold the wireless device to the ear opposite the medical device.

If you have any reason to suspect that interference is taking

place, turn the phone o immediately. If you have any

quesons about using your wireless device with an implanted

medical device, consult your health care provider.

Areas with explosion risk

Always turn o the unit when you are in an area where there

is a risk of explosion. Follow all signs and instrucons. There is

a risk of explosion in places that include areas where you are

normally requested to turn o your car engine. In these areas,

sparks can cause explosion or re which can lead to personal

injury or even death.

Turn o the unit at lling staons, and any other place that has

fuel pumps and auto repair facilies.

Follow the restricons that apply to the use of radio equipment

near places where fuel is stored and sold, chemical factories

and places where blasng is in progress. Areas with risk for

explosion are oen – but not always – clearly marked. This

also applies to below decks on ships; the transport or storage

of chemicals; vehicles that use liquid fuel (such as propane or

butane); areas where the air contains chemicals or parcles,

such as grain, dust or metal powder.

Li-ion baery

This product contains a Li-ion baery. There is a risk of re and

burns if the baery pack is handled improperly.

WARNING

Danger of explosion if baery is incorrectly replaced. To reduce

risk of re or burns, do not disassemble, crush, puncture, short

external contacts, expose to temperature above 60° C (140° F),

or dispose of in re or water. Recycle or dispose of used baeries

according to the local regulaons or reference guide supplied

with your product.

Protect your hearing

WARNING

Excessive exposure to loud sounds can cause

hearing damage.

Exposure to loud sounds while driving may distract

your aenon and cause an accident.

Listen to a headset at a moderate level, and do not hold the

device near your ear when the loudspeaker is in use.

Emergency calls

Important!

Mobile phones use radio signals, the mobile phone network, the

terrestrial network and user-programmed funcons. This means

that connecon cannot be guaranteed in all circumstances.

Therefore, never rely only on a mobile phone for very important

calls such as medical emergencies.

Vehicles

It is your responsibility to drive your vehicle safely. Never use

your handheld device while driving, if it is prohibited by law.

If you must make or answer a call, stop your vehicle at a safe

locaon rst.

Radio signals can aect electronic systems in motor vehicles

(for example, electronic fuel injecon, ABS brakes, automac

cruise control, air bag systems) that have been incorrectly

installed or are inadequately protected. Contact the manufac-

turer or its representave for more informaon about your

vehicle or any addional equipment.

Do not keep or transport ammable liquids, gases or explosives

together with the unit or its accessories.

For vehicles equipped with air bags: Remember that air bags ll

with air with considerable force. Do not place objects, including

xed or portable radio equipment in the area above the airbag

or the area where it might expand. Serious injuries may be

caused if the mobile phone equipment is incorrectly installed

and the airbag lls with air.

It is prohibited to use the unit in ight. Turn o the unit before

you board a plane. Using wireless telecom units inside a plane

can pose risks to air safety and interfere with telecommunica-

ons. It may also be illegal.

12. CARE AND MAINTENANCE

Your unit is a technically advanced product and should be

treated with the greatest care. Negligence may void the

warranty.

• Protect the unit from moisture. Rain/snowfall, moisture and

all types of liquid can contain substances that corrode the

electronic circuits. If the unit gets wet, you should remove the

baery and allow the unit to dry completely before you replace

it.

• Do not use or keep the unit in dusty, dirty environments. The

unit’s moving parts and electronic components can be damaged.

• Do not keep the unit in warm places. High temperatures can

reduce the lifespan for electronic equipment, damage baeries

and distort or melt certain plascs.

• Do not keep the unit in cold places. When the unit warms up

to normal temperature, condensaon can form on the inside

which can damage the electronic circuits.

• Do not try to open the unit in any other way than that which is

indicated here.

• Do not drop the unit. Do not knock or shake it either. If it is

treated roughly the circuits and precision mechanics can be

broken.

• Do not use strong chemicals to clean the unit.

The advice above applies to the unit, baery, mains adapter

and other accessories. If the phone is not working as it should,

please contact the place of purchase for service. Don’t forget

the receipt or a copy of the invoice.

13. WARRANTY

This product is guaranteed for a period of 24 months and for

original accessories for a period of 12 months (such as the

baery, charger, charging cradle or handsfree kit) which may

be delivered with your device, from the date of purchase. In

the unlikely event of a fault occurring during this period, please

contact the place of purchase. Proof of purchase is required for

any service or support needed during the guarantee period.

This guarantee will not apply to a fault caused by an accident

or a similar incident or damage, liquid ingress, negligence,

abnormal usage, non-maintenance or any other circumstances

on the user’s part. Furthermore, this guarantee will not apply

to any fault caused by a thunderstorm or any other voltage

uctuaons. As a maer of precauon, we recommend discon-

necng the charger during a thunderstorm.

Please note that this is a voluntary manufacturer’s warranty

and provides rights in addion to, and does not aect statutory

rights of end-users.

This guarantee does not apply if baeries other than DORO

original baeries are used.

14. COPYRIGHT AND OTHER NOTICES

Bluetooth® is a registered trademark of Bluetooth SIG, inc.

eZiType™ is a trademark of Zi Corporaon.

vCard is a trademark of the Internet Mail Consorum.

microSD is a trademark of SD Card Associaon.

The contents of this document are provided “as is”. Except as

required by applicable law, no warranes of any kind, either

express or implied, including, but not limited to, the implied

warranes of merchantability and tness for a parcular

purpose, are made in relaon to the accuracy, reliability or

contents of this document. Doro reserves the right to revise

this document or withdraw it at any me without prior noce.

Other product and company names menoned herein may be

the trademarks of their respecve owners.

Any rights not expressly granted herein are reserved. All other

trademarks are property of their respecve owners. To the

maximum extent permied by applicable law, under no circum-

stances shall Doro or any of its licensors be responsible for any

loss of data or income or any special, incidental, consequenal

or indirect damages howsoever caused.

Doro does not provide a warranty for or take any responsi-

bility for the funconality, content, or end-user support of

third-party apps provided with your device. By using an app,

you acknowledge that the app is provided as is. Doro does

not make any representaons, provide a warranty, or take

any responsibility for the funconality, content, or end-user

support of third-party apps provided with your device.

Content copyright

The unauthorised copying of copyrighted materials is contrary

to the provisions of the Copyright Laws of the United States

and other countries. This device is intended solely for copying

non-copyrighted materials, materials in which you own the

permied to copy. If you are uncertain about your right to copy

any material, please contact your legal advisor.

15. TECHNICAL DATA

Specicaons

Network bands (MHz)

[maximum radio-frequency

power/dBm]: 2G GSM

850 [33], 900 [34],

1800 [32], 1900 [30]

Bluetooth (MHz) [maximum

radio-frequency power/

dBm]:

3.0 (2402 - 2480) [6]

Dimensions: 127 mm x 66 mm x 13 mm

Weight: 97 g (including baery)

Baery: 3.7 V/800 mAh Li-ion baery

Operang ambient

temperature:

Min: 0°C (32°F)

Max: 40°C (104°F)

Charging ambient

temperature:

Min: 0°C (32°F)

Max: 40°C (104°F)

Storage temperature: Min: -20°C (-4°F)

Max: 60°C (140°F)

Specic Absorpon Rate (SAR)

This device meets applicable internaonal safety require-

ments for exposure to radio waves. Your mobile device is a

radio transmier and receiver. It is designed not to exceed the

limits for exposure to radio waves (radio frequency electromag-

nec elds) recommended by internaonal guidelines from

the independent scienc organizaon ICNIRP (Internaonal

Commission of Non-Ionizing Radiaon Protecon).

The radio wave exposure guidelines use a unit of measurement

known as the Specic Absorpon Rate, or SAR. The SAR limit

for mobile devices is 2 W/kg averaged over 10 grams of ssue

and include a substanal safety margin designed to assure the

safety of all persons, regardless of age and health.

Tests for SAR are conducted using standard operang posions

with the device transming at its highest cered power level

in all tested frequency bands. The highest SAR values under the

ICNIRP guidelines for this device model are:

Head SAR: 0.864 W/kg

Body SAR: 1.673 W/kg

During normal use, the SAR values for this device are usually

well below the values stated above. This is because, for

purposes of system eciency and to minimize interference

on the network, the output power of your mobile device is

automacally decreased when full power is not needed for the

call. The lower the power output of the device, the lower its

SAR value.

This device meets RF exposure guidelines when used against

the head or when posioned at least 0.5 cm away from the

body. When a carry case, belt clip or other form of device

holder is used for body-worn operaon, it should not contain

metal and should provide at least the above stated separaon

distance from the body.

The World Health Organizaon (WHO) has stated that current

scienc informaon does not indicate the need for any special

precauons when using mobile devices. If you are interested

in reducing your exposure, they recommend you reduce your

usage or use a hands-free accessory to keep the device away

from your head and body.

Correct disposal of this product

(Waste Electrical & Electronic Equipment)

(Applicable in countries with separate collecon systems)

This marking on the product, accessories or manual

indicates that the product and its electronic accessories

(e.g. charger, headset, USB cable) should not be disposed

of with other household waste. To prevent possible harm to

the environment or human health from uncontrolled waste

disposal, please separate these items from other types of waste

and recycle them responsibly to promote the sustainable reuse

of material resources.

Household users should contact either the retailer where they

purchased this product, or their local government oce, for

details of where and how they can take these items for envi-

ronmentally safe recycling. Business users should contact their

supplier and check the terms and condions of the purchase

contract. This product and its electronic accessories should

not be mixed with other commercial wastes for disposal. This

product is RoHS compliant.

Correct disposal of baeries in this product

(Applicable in countries with separate collecon systems)

The marking on the baery, manual or packaging

indicates that the baery in this product should not be

disposed of with other household waste. Where marked, the

chemical symbols Hg, Cd or Pb indicate that the baery contains

mercury, cadmium or lead above the reference levels in EC

Direcve 2006/66. If baeries are not properly disposed of, these

substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse,

please separate baeries from other types of waste and recycle

them through your local, free baery return system.

Declaraon of Conformity

Hereby, Doro declares that the radio equipment type

DFB-0350 (Doro 1380) is in compliance with Direcves:

2014/53/EU and 2011/65/EU. The full text of the EU

declaraon of conformity is available at the following internet

address: www.doro.com/dofc

Ecodesign declaraon,

energy eciency for external power supply

Hereby, Doro declares the external power supply for this device

is in compliance with Commission Regulaon (EU) 2019/1782

regarding ecodesign requirements for external power supplies

pursuant to Direcve 2009/125/EC.

The full informaon regarding the ecodesign requirements is

available at the following internet address:

www.doro.com/ecodesign

Tip: The default phone code is 1234.

10. TROUBLESHOOTING

Phone cannot be switched on

Baery charge low Connect the power adapter

and charge the baery.

Baery incorrectly installed Check the installaon of the

baery.

Failure to charge the baery

Baery or charger damaged Check the baery and charger.

Baery recharged in tempera-

tures < 0°C or > 40°C

Improve the charging

environment.

Charger incorrectly connected

to phone or power socket

Check the charger

connecons.

PIN code not accepted

Wrong PIN code entered too

many mes

Enter the PUK code to change

the PIN code, or contact the

service provider.

SIM card error

SIM card damaged

Check the condion of the

SIM card. If it is damaged,

contact the service provider.

SIM card incorrectly installed

Check the installaon of the

SIM card. Remove the card

and reinstall it.

SIM card dirty or damp

Wipe the contact surfaces

of the SIM card with a clean

cloth.

UK Declaraon of Conformity

Hereby, Doro declares that the radio equipment type DFB-0350

(Doro 1380) is in compliance with the relevant UK legislaon.

The full text of the UK declaraon of conformity is available at

the following internet address: www.doro.com/dofc

Product specificaties

Merk:	Doro
Categorie:	Mobiele telefoon
Model:	1380

Heb je hulp nodig?

Als je hulp nodig hebt met Doro 1380 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Mobiele telefoon Doro

Doro PhoneEasy 740 Handleiding

21 Mei 2023

Doro 1380 Handleiding

29 April 2023

Doro PhoneEasy 515 Handleiding

16 April 2023

Doro PhoneEasy 615 GSM Handleiding

14 Februari 2023

Doro Claria Handleiding

3 Februari 2023

Doro PhoneEasy 620 Handleiding

2 Februari 2023

Doro Liberto 810 Handleiding

10 Januari 2023

Doro HandleEasy 328gsm Handleiding

12 November 2022

Doro Primo 366 Handleiding

9 November 2022

Doro PhoneEasy 520 Handleiding

4 November 2022

Handleiding Mobiele telefoon

Nieuwste handleidingen voor Mobiele telefoon

Modu T Handleiding

16 April 2024

Xiaomi Redmi 13C Handleiding

25 Maart 2024

Micromax Canvas 5 Lite Q463 Handleiding

25 Maart 2024

Micromax Canvas Unite 4 Pro Q465 Handleiding

25 Maart 2024

Micromax Q402+ Handleiding

25 Maart 2024

Orange Dive 73 Handleiding

21 Maart 2024

Orange Rise 54 Handleiding

21 Maart 2024

Panasonic GU87 Handleiding

12 Maart 2024

InFocus M460 Handleiding

5 Maart 2024

InFocus F130 Handleiding

5 Maart 2024