Dormakaba Saflok SR RFID Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Dormakaba Saflok SR RFID (15 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15
INSTALLATION GUIDE
Saflok SRTM Series RFID Concierge
2Saflok SRTM Series RFID Concierge Installation Guide - PK3673_T_07_16
Table of Contents
Introduction
All information contained herein, including but not limited to product pricing and other intellectual property, is confidential and intended for the sole use of the
addressee(s) so named. Any misuse of this confidential information contained herein may result in legal action by Computerized Security Systems dba SAFLOK
and its parent company. Assembled in North America
©2015 Kaba Lodging Systems. All trademarks and registered trademarks are the property of their respective owners.
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
SR Concierge kit Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Annex 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Please check to make sure all parts are accounted for before beginning installation. Do not substitute any of the
parts. The use of substitute parts will result in poor performance of the lock.
The Saflok SR Concierge lock kit provides flexibility for properties that seek an elegant, unique design for guest
rooms and common areas. This solution allows designers to install the SR3 RFID reader behind a third party wall
plate, while fitting standard or customized lever sets and privacy thumb turn hardware on the door. This solution
removes the requirement for a full bodied lock and RFID reader on the door. The SR Concierge lock can also be
ordered with a SR1 or SR2 wall mounted RFID reader.
The SR Concierge lock controls a standard deadbolt door ajar mortise. Mechanical key override option is not available.
The SR Concierge supports the Messenger On-line system (optional) and can also integrate with third party solutions.
3
Saflok SRTM Series RFID Concierge Installation Guide - PK3673_T_07_16
*Important*
Review your local Fire, Electrical, and Building codes before installing this product. The installer must be capable and
knowledgeable of electrical access control systems. There are many variations of access control systems and local
codes; for this reason, the SR RFID Concierge kit must be installed by a qualified installer.
• HH6 firmware revision 1.32 or greater is required.
• MT4 firmware version 11-12-14 or greater is required.
Hardware
The concierge solution requires that all connections to the mortise must be routed through the door. This requires
additional hardware (hinge side power transfer) and cabling that is not part of the SR RFID Concierge kit. It is the
integrators responsibility to procure all additional hardware, cabling and instructions necessary to complete the job
and ensure these components meet any and all local standard or codes.
Power
A power source of 12-24V AC/DC with a minimum current of 125mA is required and not included with the kit. It is the
responsibility of the installer to ensure a proper low voltage power source is available to the SR Concierge Controller.
Location
The SR Concierge RFID reader should be located in close proximity to the access opening as the user will have
approximately 5 seconds to open the door before it relocks. The SR Concierge controller box must be within 15
meters of reader and mortise.
Messenger
For concierge equipped with the Messenger transceiver module the faceplate and electrical enclosure must be plas-
tic to ensure optimum transmissions of the RF communications to a nearby Messenger hub (SR Concierge controller
box faceplates are available in white, ivory, black, or dark brown plastic). If the controller location has not been
previously confirmed for connectivity to the Messenger network, consult the Messenger Site Survey instructions. In
some cases an additional hub may be required to ensure connectivity in new location.
Cable
It is recommended to run the wires from the controller to the SR reader and mortise using 3 twisted pair x 22 AWG
CMP cable (Belden 6542FE, or equivalent). Ensure any wire selected is compliant with all local standards and build-
ing codes.
Door Preparation
The two following illustrations indicate the required door prep for the mortise and wire routing to the mortise
pocket. 1:1 scale installation templates can be provided upon request.
Installation Requirements


Product specificaties

Merk: Dormakaba
Categorie: Niet gecategoriseerd
Model: Saflok SR RFID

Heb je hulp nodig?

Als je hulp nodig hebt met Dormakaba Saflok SR RFID stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Dormakaba

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd