Dormakaba Auditcon 252 Handleiding

Bekijk gratis de handleiding van Dormakaba Auditcon 252 (24 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 20 mensen en kreeg gemiddeld 4.8 sterren uit 8 reviews. Heb je een vraag over Dormakaba Auditcon 252 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1

Lock Modes

A lock is shipped from the factory with default lock “setup” values and a pre-set PIN

for unlocking the lock. This is referred to as Factory Mode.

The lock is shipped with a default factory Super Master User PINthat can be set

(i.e., changed) when the lock is in Factory Mode. Once the Super Master User PIN is

set, the Super Master User combination can be used to shelve the lock in the event

that the Master User combination is lost.

WARNING:

The setting of the Super Master User PIN is optional, however, if you do

not set the Super Master User PIN before setting the Master User PIN, all

Super Master User capabilities will be permanently lost.

The lock is removed from Factory Mode when the Master User PIN gets changed,

The lock has two modes of operation: Independent Mode and Supervisory/

Subordinate Mode. Within each operation mode, two access modes are available:

Single User accessDual User accessand . In Single User access, only one

combination is required to open the lock. In Dual User access, two combinations

must be correctly and consecutively entered to open the lock.

•Independent Mode - To operate in Independent Mode, the Master User must

first add Access Users. One (Single User access) or two (Dual User access)

combinations are required to open the lock.

•Supervisory/Subordinate Mode (Super/Sub Mode)- To operate in Super/Sub

Mode, the Master User must first add a Supervisor. Subordinate Users must

then be added by and assigned to a Supervisor. A Supervisor must enable

lock access for Subordinate User(s).

In Single User access, an enabled Subordinate User combination is required to

open the lock.

In Dual User access, two enabled Subordinate User combinations are required

to open the lock.

Once a Supervisor combination and the Supervisor ID are re-entered to disable

lock access for the Subordinate User(s) assigned to that Supervisor ID, the

Subordinate User combinations for that will no longer open the lock.

To remove a lock from an operational mode, one can “shelve” the lock which places

it in Shelved Mode. Most lock values are returned to the factory default.

AUDITCON®2 SERIES

MODELS 252 & 552

OPERATING INSTRUCTIONS

Document Number 3036.074 Rev. C - 12/06

Product specificaties