Dormakaba 1856 HT SD Handleiding

Dormakaba Niet gecategoriseerd 1856 HT SD

Lees hieronder de 📖 handleiding in het Nederlandse voor Dormakaba 1856 HT SD (23 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/23

1856 HT SD, 1856 SFT SD

Surface applied door closer

HT (stnd track) < 2” frame face with smoke detector

SFT (swing free track) < 2” frame face with smoke detector

Installation instructions

08220880 – 03-2020

| | EN

21800 Closer 03-202008220880

dormakaba 1856 HT SD, 1856 SFT SD Installation Instructions Table of Contents

Table of contents

1 Technical specifications 3

1.1 Overview 3

1.2 Tools recommended 3

2 Installation instructions 4

2.1 Overall 4

2.2 Install track 5

2.3 Install closer (regular mount) 6

2.4 Install closer (<2” frame face mount) 6

2.5 Smoke detector attachment 6

2.6 Secure arm 7

2.7 Swing free track mount (SFT) 8

3 Adjustments 9

3.1 Adjust closing speeds: sweep, latch, backcheck,

delayed actions 9

3.2 Set the hold open 9

4 Wiring 10

4.1 Electrical specifications 10

4.2 Power supply 120 VAC, 50/60 HZ 11

4.3 Power supply 24 V AC/DC 11

4.4 Power supply 24 V AC/DC with

remote detectors 12

4.5 ON/OFF switch (optional) 12

4.6 Wire gauge 13

4.7 SD-2 detector to main solenoid connection 14

4.8 SD-2 detector to auxiliary solenoid connection 14

4.9 Solenoid attachment to UL/ULC listed

alarm control panel 14

4.10 SD-2 detector interconnection 15

4.11 SD-2 detector to remote area detector 16

4.12 SD-2 detector to audible signal appliance 16

4.13 SD-2 detector to remote alarm indicator lamp 17

4.14 Alarm initiation wiring 4 wire

style B (Class B) & 6 style D (Class A)* 17

5 Final set up 19

5.1 Detector sensitivity test (ULC required only) 19

5.2 Check connections 19

5.3 Engage hold open 19

5.4 Reset detector 19

6 Maintenance 20

6.1 Maintaining the detector 20

5.5 Unit testing 20

5.6 Install covers 20

6.2 Measure and record test voltage 21

6.3 Vacuum detector 21

6.4 Testing (continued) 22

dormakaba 1856 HT SD, 1856 SFT SD Installation Instructions

08220880 03-20201800 Closer 3

Technical specifications

1 Technical specifications

1.1 Overview

Each 1856 HT SD & 1856 SFT SD unit contains a

door closer, hold open solenoid and a smoke

detector .

The unit can be used as a single installation or as

a series of devices. When the units are wired

together in a run, up to 5 may be interconnected.

Interconnections are accomplished through

terminals #4 and #15 resulting in all alarming

when any one unit senses smoke. In turn, all

associated hold open solenoids are de-energized.

Within any run smoke detecting units it is

permissible to form as many interconnected

series as the total power supply amperage will

allow; but again no more than 5 can be

interconnected.

Any unit with a smoke detector can be connected

to a non-smoke detector unit, or a remote

detector, or both. It can be a single installation

or part of any of the multiple arrangements

described above. A non-smoke detector solenoid

is a slave to the main unit de-energizing when the

main does. Single or group installations can be

connected to the alarm initiation circuit of a

compatible UL/ULC listed fire alarm control 4 or

6 wire configuration panel.

Additional functions are provided to separately

power the hold open solenoids directly from the

alarm control panel or remotely from an alarm

indicator lamp.

ATTENTION!!! Read the entire instruction sheet

prior to installing and refer to NFPA 72E.

Standards may be obtained from THE NATIONAL

FIRE PROTECTION ASSOCIATION in

Batterymarch Park, Quincy, Massachusetts,

02169.

Please make sure you have the tools listed plus

make sure you have the correct model unit and

hand designation per your application.

CAUTION: Sex nuts are required for attachment

of components to unreinforced, wood or plastic

faced composite type fire doors, unless an

alternative method is identified in the individual

door manufacture’s listings. Make sure door

efficiently operates prior to installing the closer.

When Installing main arm attachment observe

directions closely. Confirm dead stop degree prior

to door and frame preparations.

1.2 Tools recommended

Drill bits: #2 Phillips screwdriver

No. 7 drill bit & drill or 13/64”

drill bit

3/16” slotted head screwdriver

1/4-20 tap & holder M5 hex key

1/2” box wrench #3 cross point screwdriver

10” adjustable wrench

Table 1

Product specificaties

Merk:	Dormakaba
Categorie:	Niet gecategoriseerd
Model:	1856 HT SD

Heb je hulp nodig?

Als je hulp nodig hebt met Dormakaba 1856 HT SD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Dormakaba

Dormakaba Keyscan EC1500 Handleiding

9 Juli 2023

Dormakaba RCI S2500A Handleiding

9 Juli 2023

Dormakaba EAC Handleiding

9 Juli 2023

Dormakaba CLM9000 Handleiding

9 Juli 2023

Dormakaba DKX Type III Handleiding

9 Juli 2023

Dormakaba 9800 Handleiding

9 Juli 2023

Dormakaba HSW-GP Handleiding

9 Juli 2023

Dormakaba DKX-10 Handleiding

9 Juli 2023

Dormakaba Confidant RFID Kit 1 Handleiding

9 Juli 2023

Dormakaba DKX Type IV Handleiding

9 Juli 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024