Dometic 9100 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Dometic 9100 (15 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15
Read these instructions carefully. These
instructions MUST stay with this product.
USA
SERVICE OFFICE
Dometic Corporation
1120 North Main Street
Elkhart, IN 46514
SERVICE CENTER &
DEALER LOCATIONS
Please Visit:
www.eDometic.com
RECORD THIS INFORMATION FOR FUTURE
REFERENCE:
FRTA Model Number
FRTA Serial Number
Hardware Model Number
Hardware Serial Number
Date Purchased
Retailer / Qualied Installer
REVISION J
Form No. 3312737.054 1/18
(French 3312738.052_J)
©2018 Dometic Corporation
LaGrange, IN 46761
9100
POWER PATIO AWNING
HARDWARE
8952XX1.4X0#(L) BASEMENT
8952XX2.4X0#(L) STANDARD
8952XX3.4X0#(L) REDUCED PITCH
FRTA
FABRIC ROLLER TUBE ASSEMBLY
91XXXYY.XXX#(L)
INSTALLATION
INSTRUCTIONS
2
TABLE OF CONTENTS
INTRODUCTION ....................................................................................................................................................................2
DOCUMENT SYMBOLS ........................................................................................................................................................2
IMPORTANT SAFETY INSTRUCTIONS ................................................................................................................................3
A. Recognize Safety Information ...................................................................................................................................3
B. Understand Signal Words ..........................................................................................................................................3
C. Supplemental Directives ............................................................................................................................................3
D. General Safety Messages .........................................................................................................................................3
GENERAL INFORMATION .....................................................................................................................................................3
A. Included Hardware ....................................................................................................................................................3
B. Optional Components & Kits .....................................................................................................................................3
SPECIFICATIONS ..................................................................................................................................................................4
A. Hardware (Back Channel) Dimensions .....................................................................................................................4
B. Door Clearance .........................................................................................................................................................5
C. Measuring Tips ..........................................................................................................................................................5
PREPARE FOR INSTALLATION ............................................................................................................................................5
A. Door Roller And Edge Guard (Optional) ....................................................................................................................5
B. Prepare Awning Rail And Insert Fabric ......................................................................................................................5
C. Prepare Awning For Installation 6 .................................................................................................................................
D. Determine Awning Location .......................................................................................................................................8
INSTALL ELECTRICAL KITS .................................................................................................................................................8
A. Install (Fixed/Wired) Awning Switch ..........................................................................................................................8
B. Install Ignition/Safety Interlock System ......................................................................................................................9
C. Install LED Light Switch (If Applicable) ......................................................................................................................9
INSTALL AWNING ..................................................................................................................................................................9
A. Insert Awning Fabric Into Awning Rail .......................................................................................................................9
B. Attach Top Mounting Brackets / Arm Assemblies .................................................................................................... 10
C. Attach Back Channels .............................................................................................................................................12
D. Electrical Connections To Awning ............................................................................................................................13
E. Complete Back Channel Installation ........................................................................................................................14
F. Secure Awning Fabric To Awning Rail .....................................................................................................................14
VERIFY INSTALLATION.......................................................................................................................................................15
A. Test Operation .........................................................................................................................................................15
B. Secure Awning For Travel .......................................................................................................................................15
C. Keep Literature ........................................................................................................................................................15
INTRODUCTION
This awning (hereinafter referred to as “awning,” or “product”) is designed and intended for use on RVs with straight sides.
For curved sides, please see the separate Hardware List in the Dealer Service Manual for the appropriate model. This
product can be installed by one person with brief help from additional personnel. Use these instructions to ensure correct
installation and function of product.
Dometic Corporation reserves the right to modify appearances and specications without notice.
DOCUMENT SYMBOLS
Indicates additional information that is NOT related
to physical injury. Indicates step-by-step instructions.
3
This manual has safety information and instructions to help
you eliminate or reduce the risk of accidents and injuries.
A. Recognize Safety Information
This is the safety alert symbol. It is used to
alert you to potential physical injury hazards.
Obey all safety messages that follow this
symbol to avoid possible injury or death.
B. Understand Signal Words
A signal word will identify safety messages and
property damage messages, and will indicate the
degree or level of hazard seriousness.
indicates a hazardous situation that,
if avoided, could result in death or serious in- NOT
jury.
indicates a hazardous situation that,
if avoided, could result in minor or moderate NOT
injury.
is used to address practices NOT
related to physical injury.
C. Supplemental Directives
Read and follow all safety information and
instructions to avoid possible injury or death.
Read and understand these instructions be-
fore installing, using, servicing or performing
maintenance on this product.
Incorrect installation, operation, servicing,
or maintaining of this product can lead to
serious injury. Follow all instructions.
The installation comply with all ap- MUST
plicable local and national codes, including
the latest edition of the following standards:
U.S.A.
ANSI/NFPA70, National Electrical Code
(NEC)
ANSI/NFPA 1192, Recreational Vehicles
Code
CANADA
CSA C22.1, Parts l & ll, Canadian Electri-
cal Code
CSA Z240 RV Series, Recreational
Vehicles
D. General Safety Messages
Failure to obey the following warn-
ings could result in death or serious injury:
be installed and serviced by This product MUST
a qualied service technician.
Do NOT modify this product in any way. Modica-
tion can be extremely hazardous.
IMPACT OR CRUSH HAZARD. This product
should be installed in a controlled environment
(inside). Do install product during windy NOT
conditions, or when wind is expected. Otherwise,
product could move unpredictably, become un-
stable, and could detach, bend or collapse.
IMPORTANT SAFETY INSTRUCTIONS
A. Included Hardware
(2) 1/4-20 X 3/4″ Hex Head Screw
(2) 1/4″ Split Lock Washer
(8) #14-10 X 1 1/2″ Hex Head Screw
(2) #6-20 X 7/16″ Self Drilling Hex Head Washer
Screw
B. Optional Components & Kits
(1) 830304 Door Roller Kit
(1) 830304.003 Door Roller Kits (50 Pack)
(1) 3308334.006U Torsion Crank Assembly
(1) 3312853.025(#) Back Channel Spacer Kit
GENERAL INFORMATION


Product specificaties

Merk: Dometic
Categorie: Niet gecategoriseerd
Model: 9100

Heb je hulp nodig?

Als je hulp nodig hebt met Dometic 9100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Dometic

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd