Doepfer A-151v Handleiding

Bekijk gratis de handleiding van Doepfer A-151v (12 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.3 sterren uit 7 reviews. Heb je een vraag over Doepfer A-151v of wil je andere gebruikers van dit product iets vragen? Stel een vraag

doepfer System A - 100VCOA-110

1

1. Introduction

Module A-110 (VCO) is a voltage-controlledoscilla-

tor.

This VCO’s frequency range is about ten octaves. It

can produce four waveforms simultaneously: square,

sawtooth, triangle, and sine wave.

The Frequency or pitchof theVCO is determined by

the position of the octave (Range) switch and tuning

(Tune) knob, and by the voltage present at the CV

inputs. Frequency modulation (FM) of the VCO is

therefore a possibility. Footage (the octave of the

fundamental) is set by the Range control, and Fine

tuning controlled by the Tune knob.

You can control the pulse width of the square wave

either by hand, or by voltage control -Pulse Width

Modulation or PWM.

H Because of the analog nature of the design,

the VCO may need about 20 minutes’ warm-

up time for the tuning to become completely

stable.

SYNC

CV 2

CV 2

PW CV 1

PW CV 2

PW CV 2

PW

CV 1Range

A-110

VCO

Tune

Product specificaties