DJI Zenmuse H3-3D Handleiding

DJI Niet gecategoriseerd Zenmuse H3-3D

Lees hieronder de 📖 handleiding in het Nederlandse voor DJI Zenmuse H3-3D (18 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18

ZENMUSE H3-3D

User Manual

2014.12

V1.04

Warning & Disclaimer

The Zenmuse H3-3D gimbal is calibrated before delivery. No adjustment or modication to the

gimbal is required or recommended.

Ensure the camera is mounted to the gimbal before powering on your aircraft.

The H3-3D gimbal is nely calibrated according to the specied camera model and lens before

delivery. You do not need to perform extra calibration. Do not attempt to modify the gimbal or

mount extra components/devices (such as a lter, lens hood, etc.) to the camera. Be sure to use

a DJI approved battery, otherwise the performance of the gimbal may be affected.

The H3-3D gimbal is compatible with following DJI ight control systems: NAZA-M, NAZA-M V2,

WooKong-M, Phantom 2 and A2. To optimize the gimbal’s performance, download the relevant

Assistant for your ight controller and upgrade the rmware.

Make sure to operate your aerial system in the safest manner possible. We strongly recommend

that you remove all propellers, use a power supply from the R/C system or ight pack battery,

and keep children away when calibrating and conguring the gimbal. Observe the procedures

contained in this manual to mount and connect gimbal to your aircraft. Users of this product

should respect the AMA’s National Model Aircraft Safety Code.

DJI has no control over use, setup, nal assembly, modication (including use of non-specied

DJI parts i.e. motors, ESCs, propellers, etc.) or misuse, and no liability shall be assumed

nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the

user accepts all resulting liability. DJI assumes no liability for damage(s), injuries or legal

responsibilities incurred directly or indirectly from the use of this product.

DJI and Zenmuse are registered trademarks of DJI. Names of product, brand, etc., appearing

in this manual are trademarks or registered trademarks of their respective owner companies.

or manual shall be reproduced in any form without the prior written consent or authorization of

DJI. No patent liability is assumed with respect to the use of the product or information contained

herein.

Legend

Important Hints and Tips

Contents

Warning & Disclaimer 2

Legend 2

Prole 4

In The Box 4

Installation 6

Gimbal Description 6

Installing H3-3D onto a Phantom 2 6

Final Checks 8

Camera Installation 8

GCU Connection 9

Connecting the GCU and Flight Control System 9

GCU and Flight Control System Connection 10

Video Connection 11

Conguration 13

Driver and PC Assistant Installation 13

PC Assistant Interface 13

Channel Setting 13

Firmware & Software Upgrade 14

Test Flight 15

Pre-ight Checklist 15

Gimbal Test 15

Appendix 16

Troubleshooting 16

Settings When Using the A2 Flight Control System 16

Specications 17

Product specificaties

Merk:	DJI
Categorie:	Niet gecategoriseerd
Model:	Zenmuse H3-3D
Kleur van het product:	Aluminium, Black
Gewicht:	168 g
Breedte:	97 mm
Diepte:	73 mm
Hoogte:	95 mm
Certificering:	FCC (USA)\nCE (EU)\nRoHS (EU)
Materiaal:	Aluminium
Duurzaamheidscertificaten:	RoHS
Compatibele producten:	GoPro3 and GoPro3+
Draaien:	Ja