DJI Ronin 4D Flex Handleiding

Bekijk gratis de handleiding van DJI Ronin 4D Flex (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 24 mensen en kreeg gemiddeld 4.1 sterren uit 8 reviews. Heb je een vraag over DJI Ronin 4D Flex of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1

2 m.

No. Using the cable in series will destabilize the camera link and may lead to frame drops.

Ronin 4D Flex is only applicable to DJI Ronin 4D. It enables the X9 gimbal camera to be used

independently from the Ronin 4D main body.

You can mount accessories like the left and right Hand Grips of Ronin 4D, the Ronin 4D High-Bright Main

Monitor, and the DJI RS Focus Motor (2022) to the extended gimbal connector module.

Yes. Ronin 4D Flex supports up to three focus motors.

To use the DJI RS Focus Motor (2022) for controlling zoom, focus, or aperture, mount the DJI RS Focus

Motor (2022) to the extended gimbal connector module, update the focus motor to the latest rmware, fi

and connect it to the USB-C port on the bottom of the gimbal. <br>

Focus motors can be used in series.

1. Remove the main monitor from the Ronin 4D main body. Loosen the screws of the main monitor

pivot using a hex key. Attach the pivot to the lower mounting ports of the monitor, and fasten the

screws.

2. Connect the main monitor cable to the Display Port on the gimbal connector module of Ronin 4D Flex.

Attach the main monitor to the cold shoe of the gimbal connector module and tighten the screw.

3. Connect the Hand Grip Adapter to the CAN ports of Ronin 4D Flex.

4. Press and hold the power button on the gimbal connector module to turn on/o Ronin 4D. After ff

powering on, press the power button on the gimbal connector module once to start/stop recording.

FAQ

Product specificaties