DJI FPV Propeller Guard Handleiding

DJI Niet gecategoriseerd FPV Propeller Guard

Lees hieronder de 📖 handleiding in het Nederlandse voor DJI FPV Propeller Guard (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
User Guide
使用说明
使用說明
ユーザーガイド
사용자 가이드
Bedienungsanleitung
Guía del usuario
Guide de l'utilisateur
Guida dell'utente
Gebruiksaanwijzing
Manual do utilizador
Guia do usuário
Руководство пользователя
2021.01v1.0
Propeller Guard
1
2.
4.
3.
1.
Click
EN
LF
LB
Disclaimer and Warning
Please read this entire document and all safe and lawful practices
DJITM provided carefully before use. Failure to read and follow
instructions and warnings may result in serious injury to yourself or
others, damage to your DJI product, or damage to other objects in
the vicinity. By using this product, you hereby signify that you have
read this disclaimer and warning carefully and that you understand
and agree to abide by the terms and conditions herein. You agree
that you are solely responsible for your own conduct while using this
product, and for any consequences thereof. DJI accepts no liability for
damage, injury or any legal responsibility incurred directly or indirectly
from the use of this product.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated
as “DJI”) and its affiliated companies. Names of products, brands,
etc., appearing in this document are trademarks or registered
trademarks of their respective owner companies. This product and
document are copyrighted by DJI with all rights reserved. No part of
this product or document shall be reproduced in any form without the
prior written consent or authorization of DJI.
This document and all other collateral documents are subject
to change at the sole discretion of DJI. For up to date product
information, visit http://www.dji.com and click on the product page for
this product.
This disclaimer is available in various languages. In the event of
divergence among dierent versions, the English version shall prevail.
Introduction
The DJI FPV Propeller Guard is used to reduce harm to people and
damage to objects if there is a collision with the spinning propellers of
the aircraft. It is recommended to use the propeller guard in windless
environments or during indoor or low-speed ight.
Installation
1. Release the locks on the propeller guards. Check the mark on the
lock and connect the two propeller guards marked LF (Left Front)
and LB (Left Back).
2. With the rear of the aircraft facing toward you, attach the propeller
guards from underneath the extended frame arms on the left side.
Make sure the propeller guards form a complete guard around the
frame arms.
3. Close the locks. There will be a clicking sound indicating the lock
is secure.
4. Repeat the steps above to install the propeller guards on the right
side. The locks are marked RF (Right Front) and RB (Right Back).
The propulsion performance of the aircraft will be affected
after the propeller guards are attached. Fly with caution.
Specications
Weight (single) 21.8 g
Radius 95 mm
Installation Circumference 387 × 332 × 136 mm
2
免责声明和警告
使用本产品之前,请仔细阅读并遵循本文及大疆 TM 创新(DJITM)提
供的所有全指引,则可能会您和围的人带伤害,损坏本
产品或其它周围物品。一旦使用本产品,即视为您已经仔细阅读本
文档,理解、认可和受本明全部条和内。您诺对使用本
产品以及可能带来的后果负全部责任。大疆创新( )对于直接或DJI
间接使用本产品而造成的损坏、伤害以及任何法律责任不予负责。
DJI 是深圳市大疆创新科技有限公司及其关联公司的商标。本文出
现的产品称、品牌,均为其属公的商标。产品及手
大疆创新版权所有。未经许可,不得以任何形式复制翻印。
本文档及本产品所有相关的文档最终解释权归大疆创新( )所有。DJI
如有更新,恕不另行通知。请访问 官方网站以获取最www.dji.com
新的产品信息。
简 介
DJI FPV 桨叶保护罩用于减少螺旋桨与人或物体发生碰撞时造成的
意外伤害,建议在无风、室内、低速飞行时使用。
安 装
1. 扣。记,
LF Left Front,左侧前部)和 LB Left Back,左侧后部)
的两个桨叶保护罩连接起来。
2. 面朝飞行器机尾,将桨叶保护罩从左侧前后机臂下方套入,使
桨叶保护罩与机臂完全贴合。
3. 扣上锁扣,直至听到“咔”的一声,确保安装牢固。
4. RF重复以上步骤完成右侧桨叶保护罩的安装,注意该侧标记为
,右侧前部)和 ,右侧后部)。Right Front RB Right Back
安装桨叶保护罩后,飞行器动力性能会受到影响,请小心操作
规格参数
重量(单边) 21.8 g
半径 95 mm
安装后最大外形尺寸 387 × × 332 136 mm
CHS
CHT
免責聲明和警告
使用本産品之前,請仔細閱讀並遵循本文及大疆TM 創新(DJITM)提
供的所有全指南,則可能會您和圍的人帶傷害,損壞本
産品或其它周圍物品。一旦使用本產品,即視為您已經仔細閱讀本
文件,瞭解、認可和受本明全部條和內。您諾對使用本
產品及其可能帶來的後果負全部責任。大疆創新(DJI
)對於直接或
間接使用本產品而造成的損壞、傷害及其任何法律責任概不負責。
DJI 是深圳市大疆創新科技有限公司及其附屬公司的商標。本文出
現的産品稱、品牌,均為其屬公的商標。產品及手
JP
免責事項および警告
ご使用前に、この文書全体に目を通し
DJITM が提供する安全で合
法的慣行についての説明を注意深くお読みください。指示と警告
従わなかった場合、ご自身や他の人に重傷を負わせたり、または
客様の DJI 製品および周辺の他の物の破損につながる恐れがありま
す。本製品を使用することにより、本書の免責事項および警告を
く読み、記載されている利用規約を理解し、順守することに同意
たとみなされます。本製品の使用中の行動とこれに伴う結果には
ユーザーが全面的に責任を負うことに同意するものとします。本
品の使用により直接または間接的に発生する損害、傷害、および
の他法的責任に対して、DJI 一切責任を負いません。
DJI は、SZ DJI TECHNOLOGY CO., LTD.
(以下「DJI」と省略)お
よびその連会社の標です。書に載されてる製品、ブラ
ンドなどの名称は、その所有者である各社の商標または登録商標
です。本製品および本書は、不許複製 禁無断転載を原則とする
DJI の著作物のため、DJI から書面による事前承認または許諾を得
ることな、本製品たは文書いかる部分も、いかな方法
によっても複製することは固く禁じられています。
本書およびその他すべての付属書は
DJI 独自の裁量で変更される
ことがあります。最新の製品情報については
http://www.dji.com
にアクセスして、本製品に対応する製品ページをクリックしてご
覧ください。
この免責事項は複数の言語で提供されています。言語版によって
版權為大疆創新所有。未經許可,不得以任何形式複製翻印。
本文件及本產品所有相關文件的最終解釋權歸大疆創新
DJI所有。
如有更新,恕不另行通知。請前往 www.dji.com 官方網站以取得最
新的產品資訊。
簡 介
DJI FPV 槳葉保護罩用於減少螺旋槳與人或物體發生碰撞時造成的
意外傷害,建議在無風、室內、低速飛行時使用。
安 裝
1. 展開槳葉保護罩的鎖扣。識别槳葉保護罩鎖扣旁的標記,將印有
LF Left Front
,左側前部)和 LBLeft Back,左側後部)的兩
個槳葉保護罩連接起來。
2. 面向航拍機機尾,將槳葉保護罩從左側前後機臂下方套入,使
槳葉保護罩與機臂完全貼合。
3.  扣上鎖扣,直至聽到「卡嗒」的一聲,確保安裝牢固。
4.
RF (Right Front,右側前 ) 和 RB (Right Back側後部 )。
安裝槳葉保護罩後,航拍機動力性能會受到影響,請小心操作
規格參數
重量(單個)  21.8 g
半徑  95 mm
安裝後最大外形尺寸 387 × 332 × 136 mm


Product specificaties

Merk: DJI
Categorie: Niet gecategoriseerd
Model: FPV Propeller Guard

Heb je hulp nodig?

Als je hulp nodig hebt met DJI FPV Propeller Guard stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd DJI

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd