Dimplex LST050 Handleiding
Pagina's 2 Engels Heater
Bekijk de handleiding van Dimplex LST050 gratis online of download de PDF. 73 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
This guide is for quick reference only. Please refer to the operating section for further information.
How Does the Heater Control Work?
The control allows you to choose when you want heat and at what temperature.
When using a timer mode (see below), Comfort Onwill display on the home screen to tell you when the heater is maintaining
the temperature displayed. Comfort Off will display when the heater is outside of a timed heating period.
When , Manual Ecoor Frostmodes are being used the heater will always maintain the temperature shown on the home
screen.
Set the Time
To set the date and time on the heater, press , then press the with MenuEnterTime / Datehighlighted. Press or until
the correct value is shown, then press to conrm and move on to the next value. Repeat until all details are correct, Enter
and displays, then press . Set Back
The time is automatically adjusted in spring and autumn between Greenwich Mean Time (GMT) and British Summer Time
(BST).
Set the Temperature
The temperature shown on the display is the room temperature set point. This is the temperature that the
heater will maintain during heating periods. If the room temperature is above this temperature then the
heater will not operate. The heater leaves the factory with this temperature set at 21°C which represents a
typical, comfortable room temperature. If you require a dierent room temperature then press either or
on the home screen until the display shows the temperature you require.
Timer Modes
Your Quantum heater comes pre-programmed with four timer
modes. These modes dene the periods when the heater will
operate in mode. The four modes are:Comfort On
Timer ModeDescription
Out All Day6 hours heating per day in two periods
Home All Day9 hours heating per day in one period
Holiday Set the number of days for which you are
on holiday
User TimerCustomise times in four periods
Low Surface Temperature Heater
Quick Start Guide
8/53222/0 ISSUE 0
• In order to avoid overheating, Do Not Cover the heater. Do not place matrerial or garments on the heater, or obstruct
the air circulation around the heater.
• Ensure that both supply swtiches next to the heater are turned on. During the summer when no heat is required, both
wall switches can be turned o. Remember to turn both of these back on in Autumn when heat is required.
• CAUTION as some parts of this product can become very hot and cause burns. Particular attention has to be given where
children and vulnerable people are present.
• Note that due care and consideration must be taken when using this heater in series with thermal control, a program
controller, a timer or any other device that switches on the heat automatically, since a re risk exists when the heater is
accidentally covered or displaced.
Product specificaties
| Merk: | Dimplex |
| Categorie: | Heater |
| Model: | LST050 |
Heb je hulp nodig?
Als je hulp nodig hebt met Dimplex LST050 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Heater Dimplex
Dimplex PLX 2500 Handleiding Dimplex LPP075 Handleiding Dimplex DHCER20HUM Handleiding Dimplex VFMI30 Handleiding Dimplex VFMi 40C Handleiding Dimplex LPP050 Handleiding Dimplex GFP150WE Handleiding Dimplex PLX1250NC Handleiding
Alle Dimplex Heater handleidingen
Populair in Heater
Handleiding Heater
Nieuwste handleidingen voor Heater
Toyotomi KR-47 Handleiding Delonghi HSX3324FTS Handleiding Black Decker BDUH100 Handleiding Toyotomi K-30F Handleiding Klarstein Wonderwall 450 Handleiding Delonghi Dragon 5 TRD51024T Handleiding Sunwind Fan-tastic Handleiding Toyotomi TIB-09 Handleiding Toyotomi KS-R26 Handleiding Edilkamin LIBRA 9+ BACK Handleiding