Dimplex DXLWP400Tie7 Handleiding

Dimplex Heater DXLWP400Tie7

Lees hieronder de 📖 handleiding in het Nederlandse voor Dimplex DXLWP400Tie7 (8 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

08/54231/0 Issue 2

The product complies with the European Safety Standards EN60335:2-30

As with all portable heating appliances: This product is suitable only for well insulated spaces or occasional use.

Low Wattage Panel Heater

DXLWP400TS, DXLWP800TS, DXLWP400TiE7, DXLWP800TiE7 & DXLWP800TiE7B

Designed to provide gentle background heating, to take the chill o a room. Ideally to be used with a principal

source of heating.

Installation and Operating Instructions

CAUTION: Some parts of this product can

become very hot and cause burns. Particular

attention has to be given where children and

vulnerable people are present.

IMPORTANT: Avoid use of an extension cord

because the extension cord may overheat and

cause risk of re.

IMPORTANT: The wall bracket or feet supplied

with the appliance must be used.

DO NOT use this heater if it has been

dropped

DO NOT use if there are visible signs of

damage to the heater

Use this heater on a horizontal and stable

surface, or x it to the wall as applicable.

WARNING: Servicing and product repairs

should only be undertaken by the manufacturers

approved service agent or a similarly qualied

person, using only exact manufacturer approved

spare parts.

WARNING: To reduce risk of re, keep

textiles, curtains, or any other ammable

material a minimum distance of 1m from the

air outlet

This instruction leaet belongs to the appliance

and must be kept in a safe place. If changing

owners, the leaet must be surrendered to the

new owner.

The heater must be on a at stable surface

when in use.

ELECTRICAL CONNECTION

WARNING THIS APPLIANCE MUST BE EARTHED

If the socket outlets in your home are not of the 13 amp

BS1363 type they will not accept the plug connected to this

heater, therefore cut o the plug. When cut o this plug can

constitute a shock hazard if inserted into a socket outlet. It

must therefore be disposed of safely.

IMPORTANT: The wires in this mains lead are coloured in

accordance with the following code:

BLUE: NEUTRAL

BROWN: LIVE

GREEN & YELLOW: EARTH

As the colours of the wires in the mains lead may not

correspond with the coloured markings in your plug, proceed

as follows:

Connect the BROWN wire to the terminal marked ‘L’ or

coloured RED. Connect the BLUE wire to the terminal marked

‘N’ or coloured BLACK. Note: ‘L’ or ‘N’ must not be connected

to the EARTH terminal marked ‘E’ or ‘ ’ or coloured GREEN

or GREEN AND YELLOW. If in doubt, consult your electrician.

IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY BEFORE USE AND RETAINED FOR FUTURE REFERENCE

IMPORTANT SAFETY ADVICE

DO NOT use the heater in the immediate

surroundings of a bath, a shower or a swimming

pool.

DO NOT place the heater directly below a xed

socket outlet.

The socket-outlet must be accessible at all times

to enable the mains plug to be disconnected as

quickly as possible.

DO NOT cover the product.

DO NOT use this heater in small rooms when

they are occupied by persons not capable of

leaving the room on their own, unless constant

supervision is provided.

IMPORTANT: If the mains lead of this appliance

is damaged, it must be replaced by the

manufacturer or its service agent or a similarly

qualied person in order to avoid a hazard.

WARNING: In order to avoid a hazard due to

inadvertent resetting of the thermal cut-out,

this appliance must not be supplied through

an external switching device, such as a timer, or

connected to a circuit that is regularly switched

on and o by the utility.

This appliance can be used by children aged from

8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of

experience or knowledge if they have been given

supervision or instruction concerning the use of

the appliance in a safe way and understand the

hazards involved. Children shall not play with the

appliance. Cleaning and user maintenance shall

not be made by children without supervision.

Children of less than 3 years should be kept away

unless continuously supervised.

Children aged from 3 years and less than 8 years

shall only switch on/o the appliance provided

that it has been placed or installed in its intended

normal operating position and they have been

given supervision or instruction concerning

the use of the appliance in a safe way and

understand the hazards involved. Children aged

from 3 years and less than 8 years shall not plug

in, regulate and clean the appliance or perform

user maintenance.

The heater carries a warning symbol

to alert the user to the risk of re that

exists if the heater is accidentally

covered

Positioning the Heater

Select the position for the heater ensuring there

is clearance from any furniture and ttings of at

least 150mm above the heater, 50mm below (wall

mounted), 25mm each side and 300mm from the

front panel. Curtains must not be closer than

150mm from the top and/or sides of the heater.

Free Standing Operation

NEVER USE THE HEATER FREE STANDING

WITHOUT THE FEET FITTED (FEET ARE PACKED

SEPARATELY IN CARTON).

1. Lay the heater on its front.

2. Remove the two star head screws from the

base of the heater using an x-head screwdriver.

3. Place feet over base of heater, align holes and

engage hook on foot into the recess on the back of

the heater - (see Fig below)

4. Replace the screws but do not over tighten.

Please Note: Although this heater is manufactured

to comply with the relevant safety standards,

certain types of carpets could become discoloured

by the temperatures under a portable heater. If you

are concerned about this, we recommend that you

contact the carpet manufacturer for guidance.

Alternatively, either stand the heater on a suitable

base to shield the carpet or wall mount it.

Installation

The xing kit should contain: 1 drilling template, 3

screws, 3 rawlplugs and 3 mounting brackets.

Wall Mounted Operation - Timer Models only

Suggested Fixings:

SOLID BRICK/BLOCK: No. 8 Rawlplug inserts, 6mm

drill bit.

PLASTERBOARD: If possible locate studding and

use No. 8 woodscrews directly into the wood, other-

wise M5 rawlplug intersets are suitable.

NOTE: FOR OTHER WALL TYPES (e.g. Timber frame

and hollow concrete) SEEK SPECIALIST ADVICE.

1. Select the position for the heater ensuring there is

clearance from any furniture and ttings of at least

150mm above the heater, 50mm below, 25mm each

side and 300mm from the front panel. Curtains

mustnot be closer than 150mm from the top

and/or sides of the heater.

2. Select a suitable position on a wall, near to a

mains power socket, Fix the two top retaining

brackets to the wall, using suitable xings,the

distance between the hole centres is correct,

340mm for 400W Models and 540mm for

800W models (see Fig below).

3. Drill the wall at the three marked positions and t

the wall plugs.

Ensure template has been removed.

4. Locate the heater on the top brackets and

allow it to hang in place. Fit the bottom bracket

into the slot in the heater and then x it to the wall.

Test that the heater is now securely xed to the

wall.

130mm 340mm - 400W

540mm - 800W

62mm

150mm

50mm

446mm

25mm 25mm

130mm

Drilling Holes

Bracket

Product specificaties

Merk:	Dimplex
Categorie:	Heater
Model:	DXLWP400Tie7
Kleur van het product:	Wit
Timer:	Ja
Gewicht:	4600 g
Breedte:	600 mm
Diepte:	200 mm
Hoogte:	500 mm
Snoerlengte:	1 m
Gewicht verpakking:	5800 g
Breedte verpakking:	685 mm
Diepte verpakking:	85 mm
Hoogte verpakking:	720 mm
Geschikt voor:	Binnen
Instelbare thermostaat:	Ja
Timerduur (maximum):	168 uur
Verwarmingsvermogen:	400 W
Plaatsingsopties:	Floor,Wall