Dimplex DESC2TN Handleiding

Dimplex Niet gecategoriseerd DESC2TN

Lees hieronder de 📖 handleiding in het Nederlandse voor Dimplex DESC2TN (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Dimensions

(Millimetres)

Installation and Operating Instructions

Dimplex Convector Heater

Models : DESC2TN

08/52566/0 Issue 4

IMPORTANT : THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE

As with all portable heating appliances - This product is only suitable for well insulated spaces or occasional use

Fig. 1

This product complies with all the required European and UK Product Safety, Electromagnetic Compatibility and Environmental Standards. They are fully compliant with the LVD, EMC, RoHS and Eco Design

Directives and Regulations

IMPORTANT SAFETY ADVICE

DO NOT use the heater in the immediate surroundings

of a bath, a shower or a swimming pool.

DO NOT place the heater directly below a xed

socket outlet.

The socket-outlet must be accessible at all times to

enable the mains plug to be disconnected as quickly

as possible.

DO NOT operate the heater with the mains lead

overhanging the front outlet grille.

DO NOT COVER or obstruct the air inlet and outlet

openings in any way.

The Heater carries the warning symbol

indicating that it must not be covered.

WARNING: In order to avoid overheating, do not

cover the heater.

IMPORTANT: If the mains lead of this appliance is

damaged, it must be replaced by the manufacturer

or its service agent or a similarly qualied person in

order to avoid a hazard.

WARNING: In order to avoid a hazard due to

inadvertent resetting of the thermal cut-out, this

appliance must not be supplied through an external

switching device, such as a timer, or connected to

a circuit that is regularly switched on and o󰀨 by the

utility.

This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

or knowledge if they have been given supervision

or instruction concerning the use of the appliance

in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning

and user maintenance shall not be made by children

without supervision.

Children of less than 3 years should be kept away

unless continuously supervised.

Children aged from 3 years and less than 8 years

shall only switch on/off the appliance provided

that it has been placed or installed in its intended

normal operating position and they have been given

supervision or instruction concerning the use of the

appliance in a safe way and understand the hazards

involved. Children aged from 3 years and less than

8 years shall not plug in, regulate and clean the

appliance or perform user maintenance.

CAUTION: Some parts of this product can become

very hot and cause burns. Particular attention has

to be given where children and vulnerable people

are present.

WARNING: Risk of re – Do not use this appliance

connected through an extension lead or any external

switching device such as a plug in timer or remote

control plug in adaptor. All heating appliances draw

high current through the mains supply and any

weakness in the design, connections or components

in these devices can easily result in overheating of

the connection points resulting in melting, distortion

and even the risk of re.

WARNING: To avoid danger of su󰀨ocation please

remove all packaging materials particularly plastic

and EPS and keep these away from vulnerable

people, children and babies.

WARNING: To avoid the risk of accidental

strangulation from the supply cord all children and

vulnerable people must be supervised when in the

vicinity of the product whether it is working or not.

DO NOT use this heater if it has been dropped.

DO NOT use if there are visible signs of damage to

the heater.

IMPORTANT: Use this heater on a horizontal and

stable surface with the feet securely tted.

Electrical connection

WARNING – THIS APPLIANCE MUST BE EARTHED

The use of an extension lead or multi-plug adaptor is

not advised when connecting this product to the mains.

Connection through these devices could lead to risk of

overloading, overheating and even re at the extension lead

or adaptor due to inadequate connection quality

This heater must be used on an AC (~) supply only and

the voltage marked on the heater must correspond to the

supply voltage. This heater is tted with a rewirable plug

incorporating a 10/13 amp fuse. In the event of replacing

the fuse in the plug supplied, an equivalent 10/13 amp fuse

approved by ASTA to BS 1362 must be used. If any other

type of plug is used, a 15 amp fuse must be tted in the plug,

the adaptor, or at the distribution board.

IMPORTANT: If the plug is not suitable for your socket,

the 13 amp plug should be removed. Before wiring the

appropriate plug, please note that the wires in this mains

lead are coloured in accordance with the following code:

GREEN AND YELLOW: EARTH

BLUE : NEUTRAL

BROWN : LIVE

Connect the wire to the terminal GREEN AND YELLOW

marked ‘ ’ or by the earth symbol , or coloured E GREEN

or .GREEN AND YELLOW

Connect the wire to the terminal marked ‘BROWN L’ or

coloured .RED

Connect the wire to the terminal marked ‘BLUE N’ or

coloured BLACK.

Positioning the heater

Always ensure that the heater is stood on a rm, level base

near to, but not directly beneath, a suitable mains supply

socket.

Ensure that curtains and furniture are not positioned close

to the chosen position, as this would create a potential re

hazard.

DO NOT use the heater on deep pile carpets or the

long hair type of rugs, or less than 750mm (30”) away

from any overhanging surface. Keep combustible

materials such as drapes and other furnishings clear

from the front, sides and rear of the heater. Do not

use heater to dry your laundry.

WARNING: Do not use this heater in small rooms

when they are occupied by persons not capable

of leaving the room on their own, unless constant

supervision is provided.

WARNING: To reduce the risk of re, keep textiles,

curtains or any other ammable material a minimum

distance of 1m from the air outlet.

This instruction leaet belongs to the appliance and

must be kept in a safe place. If changing owners, the

leaet must be surrendered to the new owner.

Product Assembly

WARNING: THE HEATER SHOULD NEVER BE USED

WITHOUT THE FEET SECURELY FITTED.

Lay the heater on its back so the underneath of the product

is accessible. Locate and remove the foot xing screw - see

Fig. 2(a). Clip the foot in place and secure using the foot

xing screw - see Fig. 2(b).

Using the heater

WARNING: DO NOT USE THE HEATER UNTIL THE

FEET ARE FITTED CORRECTLY.

The product is intended for occasional use as a portable

unit. Please ensure the feet are securely tted before the

product is used. Once the feet have been installed simply

plug in and switch on at the wall socket.

Please note – the element has been coated with a protective

lm which will burn o󰀨 during the rst few minutes of use and

may cause a small amount of fuming. This is quite normal –

the fumes are non-toxic and will quickly disappear.

We recommend that you open a window to ventilate the

room when using the heater for the rst time.

Controls

Thermostat (all models)

The thermostat controls the heat output according to the

room temperature.

This ensures that the heater will not produce heat

unnecessarily when the room is warm.

To set the temperature you require, Gradually turn the

thermostat knob - see clockwise until the desired Fig. 3

temperature is reached. Allow some time between

increments for the room temperature to stabilise.

Alternatively to heat a cold room quickly, turn the thermostat

knob to the Max position. When the room has reached

the desired temperature, turn the thermostat knob anti-

clockwise until the thermostat clicks o󰀨. The heater will then

automatically maintain this room temperature.

The thermostat also has a frost protection setting marked

‘ ’. This setting is useful in areas such as garages to

prevent frost damage. If the thermostat is set to its minimum

setting ‘ ’, the heater will cycle ON and OFF to maintain a

temperature of approximately 5°C to help protect against

frosty conditions.

Fig. 3

Fig. 2

Safety – overheat protection

For your safety, this appliance is tted with a thermal cut-out.

In the event that the product overheats, the cut-out switches

the heater o󰀨 automatically.

To bring the heater back into operation, remove the cause of

the overheating, then unplug or turn o󰀨 the electrical supply

to the heater for a few minutes.

When the heater has cooled su󰀩ciently, re-connect and

switch on the heater.

Important Notes

Although this heater is manufactured to comply with the

relevant safety standards, certain types of carpets could

become discoloured by the temperatures under a portable

heater. If you are concerned about this, we recommend

that you contact the carpet manufacturer for guidance.

Alternatively, either stand the heater on a suitable base to

shield the carpet – call our Helpline for further advice.

You may notice some parts of the element appearing to

be hotter from time to time because of the variable airow

through the heater. This does not cause a safety hazard.

The heat outlet grille may become discoloured with use – this

is caused by airborne pollution and is not a fault.

Recycling

For electrical products sold within the European

Community.

At the end of the electrical products useful life it

should not be disposed of with household waste.

Please recycle where facilities exist.

Check with your Local Authority or retailer for

recycling advice in your country.

If you don’t intend to keep the packaging of this product for

later use or storage, please dispose of it in an eco-friendly

way, please dispose of it in your recycling bin or nearest

recycling facility, thank you.

Cleaning

WARNING – ALWAYS DISCONNECT FROM THE

POWER SUPPLY BEFORE CLEANING THE HEATER.

Before commencing cleaning, switch o󰀨 the heater and

allow it to cool. Disconnect the electricity supply to the

appliance.

The outside can be cleaned by wiping it over with a soft

damp cloth and then dried. Do not use abrasive cleaning

powders or furniture polish, as this can damage the

surface nish.

Product specificaties

Merk:	Dimplex
Categorie:	Niet gecategoriseerd
Model:	DESC2TN
Kleur van het product:	Wit
Gewicht:	3600 g
Breedte:	608 mm
Diepte:	200 mm
Hoogte:	442 mm
Snoerlengte:	1.5 m
Gewicht verpakking:	4100 g
Breedte verpakking:	690 mm
Diepte verpakking:	120 mm
Hoogte verpakking:	390 mm
Soort:	Convector elektrisch verwarmingstoestel
Gebruikershandleiding:	Ja
Aan/uitschakelaar:	Ja
Automatisch uitschakelen:	Ja
Geschikt voor:	Binnen
Instelbare thermostaat:	Nee
Certificering:	BEAB
Gemakkelijk te installeren:	Ja
Afstandsbediening inbegrepen:	Nee
Commodity Classification Automated Tracking System (CCATS):	8516295000
Bevriezings beveiliging:	Ja
Verwarmingsvermogen:	2000 W
Plaatsingsopties:	Vloer
Verwarmingselement type:	Aluminium
Verwarming power (min):	2000 W
Installatie instructie:	Ja