Dimension BST 768 Handleiding
Dimension
3D Printer
BST 768
Lees hieronder de đź“– handleiding in het Nederlandse voor Dimension BST 768 (68 pagina's) in de categorie 3D Printer. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/68
BST 768 / SST 768
User Guide
2
Dimension BST 768 / SST 768 User Guide
Notice
The information in this document is subject to change without notice.
STRATASYS, INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATE-
RIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-
ABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Stratasys, Inc. shall not be liable
for errors contained herein or for incidental or consequential damages in connection with
the furnishing, performance, or use of this material.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Changes or modifications to the Dimension system not expressly approved by Stratasys,
the party responsible for compliance, could void the user’s authority for use.
This document is protected by copyright. All rights reserved. Its use, disclosure, and
possession are restricted by an agreement with Stratasys per software copyright. No part
of this document may be photocopied, reproduced or translated into another language
without the prior written consent of Stratasys, Inc. Printed in the USA.
Stratasys, Dimension, and Catalyst are registered trademarks of Stratasys, Inc.
Krytox, Windows 2000, and Windows XP are registered trademarks of their respective
companies.
© Copyright 2006 Stratasys, Incorporated.
April 2006
The Dimension system conforms with the following standards, in
accordance with the EU Machinery, Low Voltage and Electromagnetic
Compatibility Directives: EU 89/392/EEC, EU 98/37/EEC, EU 73/23/EEC
amended by 93/68/EEC, EU 89/336/EEC
3
Dimension BST 768 / SST 768 User Guide
Introduction
Dimension is designed with ultimate simplicity in mind. The system
enables you to build parts quickly, even if you’ve never used a 3D
printer before. Its display panel prompts you to press a few keys to
get you modeling quickly.
The system models with ABS plastic, so modeled parts are strong
and durable. ABS also ensures you’ll be able to drill, tap, sand, and
paint your creations. With the speed and convenience of
Breakaway Support Technology (BST) or Soluble Support
Technology (SST), your completed parts are quickly available for
review and test.
Dimension is an innovative combination of proprietary hardware,
software, and material technology.
Congratulations…
you’ve made a smart choice!
Product specificaties
| Merk: | Dimension |
| Categorie: | 3D Printer |
| Model: | BST 768 |
Heb je hulp nodig?
Als je hulp nodig hebt met Dimension BST 768 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding 3D Printer Dimension
4 Februari 2023
Handleiding 3D Printer
- 3D Printer Anker
- 3D Printer BQ
- 3D Printer Gembird
- 3D Printer German RepRap
- 3D Printer GooVer
- 3D Printer Kodak
- 3D Printer MakerBot
- 3D Printer Polaroid
- 3D Printer PP3DP
- 3D Printer Renkforce
- 3D Printer Velleman
- 3D Printer Weistek
- 3D Printer Weller
- 3D Printer 3D Systems
- 3D Printer Exibel
- 3D Printer Monoprice
- 3D Printer Flashforge
- 3D Printer Wanhao
- 3D Printer XYZprinting
- 3D Printer Leap Frog
- 3D Printer Snapmaker
- 3D Printer Easy Threed
- 3D Printer Anycubic
- 3D Printer Creality3D
- 3D Printer Artillery
- 3D Printer Zortrax
- 3D Printer LulzBot
- 3D Printer SINDOH
- 3D Printer Creality
- 3D Printer Raise3D
- 3D Printer Craftbot
Nieuwste handleidingen voor 3D Printer
8 April 2024
8 April 2024
8 April 2024
8 April 2024
8 April 2024
8 April 2024
8 April 2024
8 April 2024
8 April 2024
3 April 2024