Digitus DA-71106 Handleiding

Digitus Externe harde schijf DA-71106

Lees hieronder de 📖 handleiding in het Nederlandse voor Digitus DA-71106 (3 pagina's) in de categorie Externe harde schijf. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3

3.5" SSD/HDD Enclosure, SATA I-III - USB 3.0

Manual

DA-71106

Introduction

Congratulations on your purchase of this Portable USB3.0 Hard Drive Enclosure. It's a great way of

making a lightweight, portable mass storage device with an unused internal hard drive that will be

detected and installed automatically by your computer when connected. Depending on the

capacity of the drive used, you can keep large files, run programs and play videos directly from it,

thanks to its super-speed USB3.0 connection. It can also be used as a backup drive to your

computer or other devices.

Specification

Transfer interface USB3.0

Transfer rate 5Gbps (MAX)

Support HDD 2.5”/3.5” Hard disk

Work temperature -40~65 °C

Work humidity 8%~90%

Storage humidity 5%~95%

Operate system Windows 2000/XP/VISTA/WIN7/8/10,MAC OS X

Installation of Hard Drive

1. Open the enclosure

2. Place hard drive into the enclosure

3. Connect SATA cable to hard drive

4. Tighten screws on the enclosure to fix the hard drive in place

5. Screw the enclosure back together

6. Connect power cable to enclosure

7. Connect USB cable to USB port on device

8. When attached to PC or device, click 'My Computer' and hard drive will appear.

9. No additional drivers required.

Package Content

 1 x 3.5” SSD/HDD Enclosure, SATA I-III - USB 3.0

 1 x Main adaptor (12V/2A)

 1 x Screwdriver

 1 x Screw

 1 x USB 3.0 cable

 1 x User manual

System Requirements

Hardware:computer should have USB port

Software:Windows 2000/XP/VISTA/WIN7/8/10, MAC OS 10.6 above

(Note: Windows98 have to install CD Driver first)

Connect the USB cable to PC.

Click “My computer” and hard-disc will appear. An icon for online plug should appear on the lower

right corner of the status bar (new hard-disc should be divided into sections with FDISK first, then

its icon will appear and normal operation can start after formatting.)

Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of

Directive 2014/30/EU (EMC), Directive 2014/35/EU (LVD) and the Directive 2011/65/EU for RoHS compliance.

The complete declaration of conformity can be requested by post under the below mentioned manufacturer

address.

Warning:

This device is a class B product. This equipment may cause some radio interference in living environment. In

this case, the user can be requested to undertake appropriate measures to prevent interference.

www.assmann.com

Assmann Electronic GmbH

Auf dem Schüffel 3

58513 Lüdenscheid

Germany

Product specificaties

Merk:	Digitus
Categorie:	Externe harde schijf
Model:	DA-71106
Kleur van het product:	Zwart
Gewicht:	460 g
Breedte:	117 mm
Diepte:	195 mm
Hoogte:	33 mm
Gewicht verpakking:	500 g
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Aan/uitschakelaar:	Ja
USB-connectortype:	USB Type-B
Meegeleverde kabels:	USB
Land van herkomst:	China
Aantal USB-aansluitingen:	1
USB-versie:	3.2 Gen 1 (3.1 Gen 1)
Aansluiting voor netstroomadapter:	Ja
Materiaal:	Aluminium
Plug and play:	Ja
USB-aansluiting:	Ja
AC-adapter, uitgangsspanning:	5 V
AC-adapter, uitgangsstroom:	3 A
Inclusief schroeven:	Ja
Opslag schijfgrootte:	2.5/3.5 "
Maximale opslagcapaciteit:	4 TB
Ondersteunde opslagstationinterfaces:	Serial ATA, Serial ATA II, Serial ATA III
Chipset:	JMS578
Overdrachtssnelheid:	5 Gbit/s
Aantal storage drives ondersteund:	1
Type product:	HDD-/SSD-behuizing
Code geharmoniseerd systeem (HS):	84733080
Geslacht USB-connector:	Vrouwelijk
Inclusief schroevendraaier:	Ja